Syntheses of 4-(2-hydroperoxy-2,2-diarylethyl)-3,5-dimethylpyrazoles, 4-(2-hydroxy-2,2-diarylethyl)-3,5-dimethylpyrazoles and the related compounds

The reactions of 1,1-disubstituted ethenes with 2,4-pentanedione in the presence of manganese(III) acetate and atmospheric oxygen yielded 4-acetyl-6,6-diaryl-3-methyl-1,2-dioxan-3-ols. The latter gave 4-(2-hydroperoxy-2,2-diarylemyl)-3,5-dimethylpyrazoles by the reaction with hydrazines in methanol-acetic acid (1:1 v/v) at 50° in 15-77% yields, or 4-(2-hydroxy-2,2-diarylethyl)-3,5-dimethylpyrazoles by the reaction with hydrazines in methanol in 2-78% yields. The acid-catalyzed reaction of 4-(2-hydroperoxy-2,2-diarylethyl)-3,5-dimethylpyrazoles yielded 4-(aroylmethyl)-3,5-dimethylpyrazoles (15-55%) and 4-(2,2-diarylethenyl)-3,5-dimethylpyrazoles (9-29%).     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Efficient synthesis of 2-modified 1alpha,25-dihydroxy-19-norvitamin D3 with Julia olefination: high potency in induction of differentiation on HL-60 cells

Six novel 2-substituted analogues of 1alpha,25-dihydroxy-19-norvitamin D(3), 6a,b-8a,b, were efficiently synthesized utilizing (-)-quinic acid as the A-ring precursor. The C2-modified A-rings were prepared as 4-alkylated (3R,5R)-3,5-dihydroxycyclohexanones 12-15 from (-)-quinic acid based on radical allylation at the C4 position of methyl (-)-quinicate. The new type of the CD-ring coupling partner 23 was synthesized from 25-hydroxy Grundmann's ketone 19 to apply to the modified Julia olefination to construct a diene unit between the A-ring and the CD-ring. The coupling yields, including a deprotection step, were 47-62%. After the separation of the diastereomers based on C2 stereochemistry, the structure (2alpha or 2beta) was determined by (1)H NMR experiments and compared to DeLuca's 2-methyl- and 2-ethyl-1alpha,25-dihydroxy-19-norvitamin D(3). Thus, the synthesized 2alpha-(3-hydroxypropyl)-1alpha,25-dihydroxy-19-norvitamin D(3) (8a) showed almost the same potency in binding to the bovine thymus vitamin D receptor (VDR) as the natural hormone 1, while its beta-isomer 8b had only a 3% affinity. Both 2alpha-allyl- and 2alpha-propyl-1alpha,25-dihydroxy-19-norvitamin D(3) (6a and 7a) and their 2beta-analogues (6b and 7b) possessed a weak affinity for the VDR. The strong VDR ligand 8a was ca. 36-fold more potent in induction of HL-60 cell differentiation than 1, and interestingly, even the weaker ligand 8b showed a 6.7-fold higher potency in the cell differentiation activity than that of 1.     

Quantitative estimation of interaction between carbohydrates and concanavalin A by surface plasmon resonance biosensor

We measured the affinity of more than 20 sugars with concanavalin A (ConA) by an optical biosensor (surface plasmon resonance sensor) using asialofetuin (ASF) as an immobilized binding partner of ConA. We determined kinetic parameters of the effects of sugars on the dissociation of ConA from ASF quantitatively, and the structural requirements of the functional groups of sugars for binding with ConA. We found that the affinity of ConA for sugars is dependent on its conformation induced by interaction with the binding partner. In addition, the results showed that optical biosensor system is well mimics the interaction of ConA with sugars in biomembrane.     

Specific interaction between polyethylenimine and azo dyes carrying hydroxyl groups

The binding of acid azo dyes having phenolic hydroxyl groups such as orange I ( I ), orange II ( II ), chrome violet ( III ), 4-hydroxyazobenzene-4′-sulfonate ( IV ), and 2,4-dihydroxyazobenzene-4′-sulfonate ( V ) by polyethylenimine was studied by equilibrium dialysis and spectroscopic methods. The results obtained indicate that dyes ( III ) and ( V ) with two OH groups are bound much more strongly than dyes ( I ), ( II ), and ( IV ) with one OH group. Also polyethylenimine is far superior to any other polymers which have been examined, including bovine serum albumin, polyvinylpyrrolidone, and poly-L -lysine, in its ability to form complexes with these dyes ( III ) and ( V ). The OH groups involved participate preferentially in complex formation with polyethylenimine. The unusual affinity of polyethylenimine for the dyes carrying OH groups is discussed.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

A systematic preparation of new contracted Gaussian-type orbital sets. VIII. MINI-1 and MIDI-1 sets for Ga through Cd

Minimal contracted Gaussian basis sets are presented for Ga through Cd. Characteristically these Gaussian-based minimal sets give far better d orbital energies than those by minimal STO basis sets. These new basis sets were tested on Br₂ for which a new benchmark calculation was also performed. The test result is satisfactory in that these basis sets produce good general agreement with the near Hartree–Fock calculation with respect to the molecular spectroscopic constants.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Capacitance-conductance detector for high-pressure liquid chromatography. Application to alkaloids and fatty acids

Summary A new type of detector for high-pressure liquid chromatography has been designed. This detector is equipped with a RC resonance circuit, and is similar to the capacitance detector previously reported. It is operated as a capacitance detector with nonpolar eluents; while with polar solvents, it behaves as a conductance detector. Electrolytes such as salts, acids and bases are sensitively detected. The detector was successfully used for the detection of fatty acids and alkaloids.

---

Zusammenfassung Ein neuartiger Detektor für die Hochdruck-Flüssigchromatographie wurde entwickelt. Dieser ist mit einem Resonanzstromkreis ausgestattet und ähnelt dem kürzlich beschriebenen Kapazitanz-Detektor. Als solcher funktioniert er mit nichtpolaren Eluenten, während er sich mit polaren Lösungsmitteln wie ein Leitfähigkeitsdetektor verhält. Salze, Säuren und Basen werden empfindlich nachgewiesen. Das Gerät wurde zum Nachweis von Fettsäuren und Alkaloiden verwendet.