Syntheses and structures of hypervalent pentacoordinate carbon and boron compounds bearing an anthracene skeleton--elucidation of hypervalent interaction based on X-ray analysis and DFT calculation

Pentacoordinate and tetracoordinate carbon and boron compounds (27, 38, 50-52, 56-61) bearing an anthracene skeleton with two oxygen or nitrogen atoms at the 1,8-positions were synthesized by the use of four newly synthesized tridentate ligand precursors. Several carbon and boron compounds were characterized by X-ray crystallographic analysis, showing that compounds 27, 56-59 bearing an oxygen-donating anthracene skeleton had a trigonal bipyramidal (TBP) pentacoordinate structure with relatively long apical distances (ca. 2.38-2.46 A). Despite the relatively long apical distances, DFT calculation of carbon species 27 and boron species 56 and experimental accurate X-ray electron density distribution analysis of 56 supported the existence of the apical hypervalent bond even though the nature of the hypervalent interaction between the central carbon (or boron) and the donating oxygen atom was relatively weak and ionic. On the other hand, X-ray analysis of compounds 50-52 bearing a nitrogen-donating anthracene skeleton showed unsymmetrical tetracoordinate carbon or boron atom with coordination by only one of the two nitrogen-donating groups. It is interesting to note that, with an oxygen-donating skeleton, the compound 61 having two chlorine atoms on the central boron atom showed a tetracoordinate structure, although the corresponding compound 60 with two fluorine atoms showed a pentacoordinate structure. The B-O distances (av 2.29 A) in 60 were relatively short in comparison with those (av 2.44 A) in 59 having two methoxy groups on the central boron atom, indicating that the B-O interaction became stronger due to the electron-withdrawing nature of the fluorine atoms.     

Energy transfer reaction of cationic porphyrin complexes on the clay surface: effect of sample preparation method

Photochemical energy transfer of non-aggregated cationic porphyrins on an anionic-type clay (Smecton SA) surface was investigated. The efficiency of energy transfer and excited-state quenching in the absence of energy transfer were evaluated at various loading levels of porphyrin on the clay surface and were found to be significantly affected by the loading level. As the latter increased, both energy transfer efficiency and excited-state quenching increased. Judging from the dependency of energy-transfer efficiency on the porphyrin loading level, a partially clustered structure, but without aggregation, of porphyrins on the clay surface is proposed.     

Chelate and intramolecular ion-pair formation: A guiding concept for structure/selectivity relationships in the liquid-liquid extraction of alkali and alkaline earth metal ions by anionic crown ether derivatives

Crown ether dyes with pendent anionic side-arms were synthesized for extractionspectrophotometry of alkali and alkaline earth metal ions. Dramatic changes in metal selectivity were obtained simply by changing the nature of the anionic side-arm on the same crown ether skeleton. A structure/metal selectivity relationship is discussed in detail in terms of “chelate” and “intramolecular ion-pair” formation. Small metal cations (high charge density) are preferred in the extraction by a crown ether reagent with a charge-localized anionic side-arm through the formation of a “chelate”. Large metal cations (low charge density) are preferred in the extraction by reagents with a charge-delocalized anionic side-arm through the formation of an “intramolecular ion-pair”. Steric restrictions imposed by the side-arm on the metal ion approaching the crown ether are also important factor in controlling the selectivity of these reagents.     

Nucleophilic additions of arylzinc compounds to aldehydes mediated by CrCl(3): efficient and facile synthesis of functionalized benzhydrols, 1(3H)-isobenzofuranones, benzyl alcohols, or diaryl ketones

In the presence of a stoichiometric amount of CrCl(3) and trimethylchlorosilane (TMSCl), nucleophilic addition of arylzinc compounds 1c-h to arylaldehydes 2a,b,g smoothly proceeded at room temperature to yield corresponding benzhydrols 4a-f in good yields. From arylzinc compounds 1a,b, 3-aryl-1(3H)-isobenzofuranones 3a-f were given by the CrCl(3)-mediated reaction with arylaldehydes 2a-f. Diaryl ketones 5a-e were obtained in good yields by the addition of excess amount of benzaldehyde as an oxidant to the resulting solution after the CrCl(3)-mediated reaction between arylzinc compounds 1c-g and arylaldehydes 2b,g was completed. In the nucleophilic additions of arylzinc compounds 1a,d,f to alkyladehydes 6b-f, the treatment of arylzinc compounds with CrCl(3) was required prior to the addition of the aldehydes in order to prevent the fast protodezincation of arylzinc compounds by the enolizable aldehydes. In these CrCl(3)-mediated nucleophilic additions of arylzinc compounds to aldehydes, arylchromium(III) species are probably reactive intermediates.     

Trifluoroethylxanthate as an Analytical Reagent: AAS of Zinc,Antimony and Lead After Coprecipitation of Their Trifluoroethylxanthates onto Microcyrstalline Naphthalene

Abstract

A sensitive method has been developed for the direct atomic absorption spectrometric determination of zinc, antimony and lead after coprecipitation of their trifluoroethylxanthates onto microcrystalline naphthalene. The metal xanthates are quantitatively coprecipitated over the pH ranges: Zn, 5.9–8.4; Sb, 4.0–6.0 and Pb, 4.0–11.0. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF. This solution is aspirated into an air-acetylene flame at 213.9, 217.6 and 217.0nm for Zn, Sb and Pb, respectively. Beer's law is obeyed in the concentration range 2–50, 3–90 and 5–60 μg of Zn, Sb and Pb, respectively in 10ml of the final DMF solution. RSDs are at the ± (0.5–0.6)% level (n=10). The concentration for 1% absorption is 0.019, 0.035 and 0.060μg/ml for Zn, Sb and Pb, respectively. The method is suitable for the preconcentration of the metals from a larger volume of the aqueous phase, and has been employed for their determination in standard reference materials. It may be employed for the simultaneous determination of Zn, Pb and Sb in a solution by pH control.     

Gas Storage in Single-Walled Carbon Nanotubes

Abstract

X-ray diffraction (XRD) and electrical resistance measurement on single-walled carbon nan-otube (SWNT) samples prepared by the arc-discharge method are reported. The XRD profile of heat-treated sample indicated that air (oxygen, and/or nitrogen and/or water) can be condensed inside the SWNTs. We also found that the electrical resistance of SWNT soot is significantly affected by exposing to the oxygen gas and humid air.     

The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

Binding of acetylcholine and quaternary ammonium compounds to a C3-symmetric bowl-shaped tripeptide of 2-(3-aminophenoxy)propanoic acids acting as a ditopic receptor

The new tripeptide reported here is composed of (R)-2-(3-aminophenoxy)propionic acid and is a bowl-shaped receptor that simultaneously binds both cations and anions of acetylcholine chloride and benzyltrimethylammonium compounds. An intriguing conformational change of the host was observed in the complexation of the ionic pair, where anion-induced flipping of the amide group on the macrocycle occurred.     

Synthesis of Telechelic Polystyrene by Radical Polymerization Using 1,4-Bis(p-tert-Butylphenylseleno-Methyl)benzene as a Photoiniferter

Abstract

1,4-Bis(p-tert-butylphenylselenomethyl) benzene was synthesized, and used as a bifunctional photoiniferter for the polymerization of styrene. Both the polymer yields and the number average of molecular weights (_n) of polymers increased with the polymerization. The polymerization of styrene by this iniferter permitted telechelic polystyrene containing arylseleno groups at both chain ends, and the degree of functionality was 1.9. The seleno groups of both chain ends of polystyrene were reduced quantitatively by tri-n-butyltin hydride. These seleno groups in polystyrene were also eliminated by treatment with hydrogen peroxide to give telechelic polystyrene with carbon-carbon double bond at both chain ends. Further, polystyrene with double bonds was converted to telechelic polystyrene carrying terminal functional groups as epoxy, hydroxy, and iodide group, respectively.

     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).