Molecular modeling study of species-selective peroxisome proliferator-activated receptor (PPAR) alpha agonist; possible mechanism(s) of human PPARalpha selectivity of an alpha-substituted phenylpropanoic acid derivative (KCL)

In order to investigate the reason why phenylpropanoic acid derivative (KCL), a potent, human peroxisome proliferator-activated receptor (PPAR) alpha-selective agonist, shows this selectivity, we analyzed the binding modes of KCL and a related compound to the ligand-binding domain of human PPARalpha and rat PPARalpha by means of computer-aided molecular modeling. We concluded that the characteristic specificity of KCL is due to a specific hydrophobic contact between the hydrophobic tail part (the 4-trifluoromethyl group) and the key amino acid Ile272 located on the helix three region of the human PPARalpha ligand binding domain. We propose a possible binding mode of KCL with the ligand-binding domain of human PPARalpha. This binding model should offer important insights for further structural design of subtype-selective PPARalpha agonists for the treatment of altered metabolic homeostasis, such as dyslipidemia, obesity, and diabetes.     

Synthesis of poly (ethylene oxide)-b-polysilane by anionic polymerization of masked disilenes using a macroinitiator method

Poly(ethylene oxide-)-poly(1, 1-dimethyl-2, 2-dihexyldisilene) block copolymers (PEO-b-PMHS) were synthesized by the anionic polymerization of masked disilenes initiated with the potassium alkoxide of poly(ethylene glycol). The block copolymer self-assembled into polymer micelles in water accompanied by a transition in the polysilane conformation.     

Radical alkenylation of alpha-halo carbonyl compounds with alkenylindiums

Alkenylation reaction of alpha-halo carbonyl compounds with alkenylindiums proceeded via a radical process in the presence of triethylborane. Unactivated alkene moieties as well as a styryl group could be introduced by this method. The geometry of the carbon-carbon double bonds of the alkenylindiums was retained. Preparation of an alkenylindium via a hydroindation of 1-alkyne followed by radical alkenylation established an efficient one-pot strategy. [reaction: see text]     

Reaction of 2-methoxy-3H-azepine with NBS: efficient synthesis of 2-substituted 2H-azepines

[reaction: see text] The reaction of 2-methoxy-3H-azepines, in the presence or absence of a nucleophile, with N-bromosuccinimide (NBS) gave a regioselective 1,4-adduct from which the corresponding 2H-azepine derivatives were formed via base-promoted hydrogen bromide elimination, generally in moderate to quantitative yield. Competitive formation of 4-bromo-2-methoxy-3H-azepine by electrophilic substitutuion or 3H-azepin-2-yl 2H-azepin-2-yl ether by transetherification was minimized at lower reaction temperatures. Quantitative substitution of 2-(2',4',6'-trichlorophenoxy)-2H-azepine derivatives, formed in moderate yield from the respective 3H-azepine and NBS in the presence of 2,4,6-trichlorophenol (TCP), by various nucleophiles gave the corresponding 2-substituted 2H-azepine. Among these nucleophiles were alkanethiol and alkylamine that are not tolerated in the reaction of 3H-azepine and NBS.     

Microwave‐Assisted Palladium‐Catalyzed Direct Arylation of 1,4‐Disubstituted 1,2,3‐Triazoles with Aryl Chlorides

Treatment of 1,4‐disubstituted 1,2,3‐triazoles with aryl chlorides in the presence of potassium carbonate under palladium catalysis and microwave irradiation at 250 °C for 15 min leads to arylation of the triazole at the 5‐position. A variety of functional groups, including ester and hydroxy groups, are compatible. The procedure is suitable for the regioselective preparation of trisubstituted triazoles. Microwave irradiation accelerates the reaction, thus allowing the rapid synthesis of trisubstituted triazoles, which are difficult to synthesize selectively.     

Regiospecific allylation of acetals with allylsilanes catalyzed by iodotrimethylsilane. Synthesis of homoallylethers

Allylation of acetals with allylsilanes is catalyzed by iodotrimethylsilane to give the corresponding homoallyl ethers, with regiospecific transposition of the allyl group.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Photoelectron and penning ionization electron spectroscopic investigation of trimethylsilyl- and t-butyl-thiophenes

Penning ionization electron spectroscopy and CNDO/S calculations have been successfully applied to the analyses of the UV photoelectron spectra of 2- and 2,5-bistrimethylsilylthiophene and 2-t-butylthiophene. The relative intensities of the π type bands are greatly enhanced in the Penning spectra compared with those of the UV photoelectron spectra.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).