Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

NMR characterization of new 10-membered-ring macrolactones and dihydrobenzophenazine-5-one, oxidized derivatives of benzo[a]phenazines

Peroxidation of the phenazine of beta-lapachone using m-ClC6H4CO3H-CH2Cl2 furnished a macrolactone with a rigid 10-membered ring, and the corresponding N-oxide, along with a dihydrobenzophenazine-5-one. All of the new compounds were fully characterized by spectroscopic methods, with the unambiguous assignment of the hydrogens and carbon NMR signals for the N-oxide, with the aid of 2-D NMR, mainly COSY, HMQC, HSQC and HMBC. For the other two compounds some signals could not be assigned owing to their own intrinsic features.     

Direct versus resonances mediated F+OH collisions on a new 3A" potential energy surface

A theoretical study of the F(2P) + OH(2Pi) --> HF(1Sigma+) + O(3P) reactive collisions is carried out on a new global potential energy surface (PES) of the ground 3A" adiabatic electronic state. The ab initio calculations are based on multireference configuration interaction calculations, using the aug-cc-pVTZ extended basis sets of Dunning et al. A functional representation of the PES shows no nominal barrier to reaction, contrary to previous results by others. Wave packet and quasiclassical trajectory calculations have been performed for this PES to study the F + OH(v = 0,j) reactive collision. The comparison was performed at fixed and constant values of the total angular momentum from 0 to 110 and relative translational energy up to 0.8 eV. The reaction presents a dynamical barrier, essentially due to the zero-point energy for the bending vibration near the saddle point. This determines two different reaction mechanisms. At energies higher than approximately 0.125 eV the reaction is direct, while below that value it is indirect and mediated by heavy-light-heavy resonances. Such resonances, also found in the simulations of the photodetachment spectrum of the triatomic anion, manifest themselves in the quasiclassical simulations, too, where they are associated to periodic orbits.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Absolute line intensity measurements of hot bands for carbonyl sulfide at 12 microm

Using diode-laser spectroscopy, the intensities of 58 lines of the v(1) + v(1/2) - v(1/2) band and 36 lines of the 2v(1) - v(1) band of OCS have been measured. The corresponding band strengths S(0)(v) and the vibrational transition dipoles micro(v) have been derived through least squares fitting of these individual intensities. The band strengths values have been determined with a precision better than 2.5%.     

Ion chromatographic determination of iodide in urine and serum using a tubular ion-selective electrode based on a homogeneous crystalline membrane

The use of a laboratory-made iodide ion-selective electrode with tubular configuration and based on a crystalline membrane (AgI/Ag₂S) as the detector for ion chromatographic determination of iodide in urine and serum is described. A CIS reversed-phase column was coated withN-cetylpyridinium chloride to prepare a low-exchange-capacity analytical column and with hexadecyltrimethylammonium bromide to prepare a concentrator pre-column. A 2.0 ml min^–1 flow rate of deionized water and 0.1 mol 1^–1 KNO₃ solution was used for the pre-concentration and for the chromatographic separation, respectively. For optimum performance of the detector a background level of iodide was added into the column effluent. A linear relationship (r = 0.9997) between tubular electrode potential (as peak height) and iodide concentration in the range 5–400 g 1^–1 and a detection limit of 1.47 g 1^–1 were obtained. The method shows good reproducibility for both peak height (2.2% RSD) and retention time (1.3% RSD). Recoveries on its application to the samples were 93.0–100.9% for urine and 91.4–106.0% for serum.     

Metal speciation dynamics in colloidal ligand dispersions

In this work we propose a dynamic metal speciation theory for colloidal systems in which the complexing ligands are localized on the surface of the particles; i.e., there is spatial heterogeneity of binding sites within the sample volume. The differences between the complex formation and dissociation rate constants of complexes in colloidal dispersions and those in homogeneous solutions originate from the differences in kinetic and mass transport conditions. In colloidal systems, when the effective rate of dissociation of the surface complexes becomes fully diffusion controlled, its value is defined via the geometrical parameters of the particle. We assess the extent to which the conventional approach of assuming a homogeneously smeared-out ligand distribution overestimates the lability of surface complexes in colloidal ligand dispersions. The validity of the theory is illustrated by application to binding of lead and cadmium by carboxyl modified latex particles: our approach correctly predicts the formation/dissociation rate constants, which differ by several orders of magnitude from their homogeneous solution counterparts.     

Reactions of 2-pyridylphenylacetonitrile and 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane with cobalt(II), nickel(II), copper(II) and zinc(II) chlorides and copper(II) bromide

Summary 2-Pyridylphenylacetonitrile (ppa) is oxidized by copper(II) halides in 1,2-dichloroethane to 1,2-dicyano-1,2-diphenyl-1,2-di(2-pyridyl)ethane (dcppe), yielding 41 complexes of dcppe with copper(II) dihalide, [CuX₂(dcppe)₄] (green). Nickel(II) and zinc(II) chlorides react with ppa giving complexes of a general formula [MCl₂(ppa)₂].Dcppe reacts with copper(II), zinc(II) chlorides and copper(II) bromide yielding complexes of formulae [CuCl₂(dcppe)₄] (yellow), [ZnCl₂(dcppe)₂] and [CuBr₂(dcppe)]. No reaction is observed with cobalt(II) and nickel(II) chlorides.     

Diffuse-reflectance Fourier transform-infrared spectroscopic microanalysis of the flavonolignans

Diffuse-reflectance Fourier transform-infrared spectroscopic (DRIFT) microanalysis (10 g samples) of a selected series of flavonoids was studied, comparing to transmission FT-IR spectroscopic analysis of the same samples at the mg level. DRIFT was shown to be a useful, sample-saving and reliable IR technique for the structural analysis and compound identification of the mainSilybum genus 3-OH-flavonolignans (silybin, isosilybin, silydianin, silychristin and isosilychristin) and the dihydroflavonol taxifolin.     

Solar energy conversion from water photolysis by biological and chemical systems

The production of chemicals and fuels, or energy-rich compounds, from water by sunlight is described as a particularly attractive means for the conversion of solar energy to a valuable renewable resource. The redox properties of photoexcited molecules and the operating mechanism of light-driven systems are first considered. The mechanism of water oxidation carried out by higher plants and green algae-which is actually one of the most important biochemical reactions—as well as that of artificial photosystems, up-to-now designed trying to simulate the natural process with higher efficiency and simplicity, are likewise discussed. A number of biological and chemical light-driven systems are presented as practical ways to solar energy conversion.