Comparative assessment of solid-phase extraction clean-up procedures, GC columns and perfluoroacylation reagents for determination of type B trichothecenes in wheat by GC-ECD

Various solid-phase extraction (SPE) procedures for clean-up, two perfluoroacylation reagents (pentafluoropropionic anhydride (PFPA) and heptafluorobutyric anhydride (HFBA)) and two chromatographic columns (HP-1701 and HP-5) have been assessed comparatively to achieve the determination of type B trichothecenes (deoxynivalenol (DON), nivalenol (NIV), 3- and 15-acetyldeoxynivalenol (3- and 15-ADON)) in wheat grain by gas chromatography (GC)-electron-capture detection (ECD). Spiked wheat samples were extracted with acetonitrile-water (84:16, v/v). Tested SPE procedures were MycoSep 225 column, Florisil and different cartridges prepared in the laboratory with mixtures of various sorbents like alumina, Celite 545, C18, silica and charcoal. We propose MycoSep 225 column, and cartridges made with alumina-charcoal-silica and alumina-charcoal-C18 silica mixtures as clean-up procedures on the basis of recovery values (89.6, 87.3 and 86.1% for deoxynivalenol, respectively, at 1.0 mg/kg spiking level). The two last procedures are less expensive. Pentafluoropropionic anhydride was more stable against moisture and less expensive, while recoveries were similar to those obtained with heptafluorobutyric anhydride. HP-1701 column can separate 3- and 15-acetyldeoxynivalenol derivatives while HP-5 cannot, although this last column provided lower bleed and better sensitivity.     

Static electric dipole polarizability of small sodium aggregates

We present pseudopotential local-spin-density calculations of the static electric polarizability of sodium dimers and trimers and their respective cations. The electronic polarizabilities are obtained from self-consistent calculations in the presence of an external electric field, which is kept sufficiently small to avoid non-linear effects. The calculated polarizability tensor has a strong anisotropy directly related to the geometric and electronic structures of the molecules, the anisotropy being larger for the neutral clusters. The polarizabilities are averaged over the vibrational motion and rotations of the aggregates in order to be compared with the experimental measurements. The obtained values show an improvement in the agreement with experiment with respect to the values calculated in the spherical approximation.     

Metallonitrosyl fragment as electron acceptor: intramolecular charge transfer, long range electronic coupling, and electrophilic reactivity in the trans-[NCRu(py)(4)(CN)Ru(py)(4)NO](3+) ion

The new complex trans-[NCRu(py)(4)(CN)Ru(py)(4)NO](PF(6))(3) (I) was synthesized. In acetonitrile solution, I shows an intense visible band (555 nm, epsilon = 5800 M(-1) cm(-1)) and other absorptions below 350 nm, associated with d(pi) --> pi(py) and pi(py) --> pi(py) transitions. The visible band is presently assigned as a donor-acceptor charge transfer (DACT) transition from the remote Ru(II) to the delocalized [Ru(II)-NO(+)] moiety. Photoinduced release of NO is observed upon irradiation at the DACT band. Application of the Hush model reveals strong electronic coupling, with H(DA) = approximately 2000 cm(-1). The difference between the optical absorption energy and redox potentials for the donor and acceptor sites (Ru(III,II), 1.40 V, and NO(+)/NO, 0.50 V, vs Ag/AgCl, 3 M KCl, respectively) (hnu - DeltaE(red)) is 1.33 eV, a large value which probably relates to the significant changes in distances and angles for the Ru-N-O moiety upon reduction. UV-vis absorptions, IR frequencies, and redox potentials are solvent-dependent. Controlled potential reduction (of NO(+)) and oxidation (of Ru(II) associated with the dicyano-chromophore) of I afford stable species, [NCRu(II)(py)(4)(CN)Ru(py)(4)NO](2+) (I(red)) and [NCRu(III)(py)(4)(CN)Ru(py)(4)NO](4+) (I(ox)), respectively, which are characterized by UV-vis and IR spectroscopies. I(red) shows an EPR spectrum characteristic of [Ru(II)-NO(*)] complexes. Compound I is electrophilically reactive in aqueous solution above pH 5: values of the equilibrium constant for the reaction [NCRu(py)(4)(CN)Ru(py)(4)NO](3+)+ 2 OH(-) <--> [NCRu(py)(4)(CN)Ru(py)(4)NO(2)](+) + H(2)O, K = 3.2 +/- 1.4 x 10(15) M(-2), and of the rate constant for the nucleophilic addition of OH(-), k = 9.2 +/- 0.2 x 10(3) M(-1) s(-1)(25 degrees C, I = 1 M), are obtained, with DeltaH = 90.7 +/- 3.8 kJ mol(-1) and DeltaS = 135 +/- 13 J K(-1) mol(-1). The oxidized complex, I(ox), shows an enhanced electrophilic reactivity toward OH(-). This addition reaction is followed by irreversible processes, which most probably lead to disproportionation of bound nitrite and other products.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Modification of the luminescence properties of an Europium(III) Tris(β-diketonate) Complex by Inclusion in γ-cyclodextrin and 2,3,6-trimethyl-γ-cyclodextrin

A 1:1 inclusion compound between octakis(2,3,6-tri-O-methyl)-γ-cyclodextrin (TRIMEG) and the chelate complex Eu(NTA)₃·2H₂O (NTA=1-(2-naphthoyl)-3,3,3-trifluoroacetonate) was prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and photoluminescence spectroscopy. The results were compared with those obtained for the corresponding native γ-CD adduct. Excitation and emission spectra were measured, and the lifetimes were determined for the Eu³⁺ first excited state (⁵D₀). The results indicate the presence of only one low-symmetry environment for the Eu³⁺ cations in the inclusion compounds. Encapsulation of the Europium complex in the two CDs increases the quantum efficiency of the ligand-to-metal energy transfer pathway, but the efficiency of the Eu³⁺ sensitization was significantly higher with TRIMEG as the host molecule. This may be related with the observation that the two hosts appear to have different influences on the Eu³⁺ coordination environments for the guest molecule.     

Rhenium(I)-induced cyclization of thiosemicarbazones derived from beta-keto esters

The reactions of methylacetoacetate and ethyl 2-methylacetoacetate thiosemicarbazones (H(2)L(A) and H(2)L(B), respectively) with [ReX(CO)(5)] and [ReX(CO)(3)(CH(3)CN)(2)] (X = Cl, Br) were explored under various experimental conditions. Besides the adducts fac-[ReX(CO)(3)(H(2)L)], in which the rhenium is coordinated to three carbonyl groups, the X anion, and the N,S-bidentate thiosemicarbazone ligand, the following complexes were also isolated: fac-[ReBr(CO)(3)(Hpyz(B))], the tetrameric complexes fac-[Re(pyz(A))(CO)(3)](4) and fac-[Re(pyz(B))(CO)(3)](4), and fac-[Re(pyz(B))(CO)(3)(H(2)O)] (where Hpyz(A) and Hpyz(B) are pyrazolones derived by cyclization of H(2)L(A) and H(2)L(B), respectively). The cyclization reactions were monitored by (1)H NMR spectroscopy and the complexes isolated were identified by elemental analysis, mass spectrometry, IR and (1)H NMR spectroscopy, and in some cases by X-ray diffractometry. The isolation and the full structural identification of the rather unusual fac-[ReBr(CO)(3)(Hpyz(B))], which contains the enol form of the pyrazolone ligand, affords new insight into the cyclization of thiosemicarbazones derived from beta-keto esters.     

Improved determination of flavour compounds in butter by solid-phase (micro)extraction and comprehensive two-dimensional gas chromatography

The practicability and potential of comprehensive two-dimensional gas chromatography (GC x GC) coupled to both conventional flame ionisation (FID) and time-of-flight mass spectrometric (TOF-MS) detection, were compared with those of conventional one-dimensional (1D) GC, with the determination of flavour compounds in butter as an application. For polar flavour compounds, which were collected from the aqueous fraction of butter by means of solid-phase extraction (SPE), it was found that GC x GC dramatically improves the overall separation. Consequently, quantification and preliminary identification based on the use of ordered structures, can be performed more reliably. The improvement effected by replacing 1D-GC by GC x GC is considerable also in the case of TOF-MS detection, as illustrated by the high match factors generally obtained during identification. GC x GC was also used successfully for the characterisation of volatile flavour compounds in the headspace of butter collected by solid-phase microextraction (SPME) and to study the effect of heat treatment on the composition of butter samples in more detail.     

Scanning electrochemical microscopy as a probe of Ag+ binding kinetics at Langmuir phospholipid monolayers

A new method has been developed for measuring local adsorption rates of metal ions at interfaces based on scanning electrochemical microscopy (SECM). The technique is illustrated with the example of Ag+ binding at Langmuir phospholipid monolayers formed at the water/air interface. Specifically, an inverted 25 microm diameter silver disc ultramicroelectrode (UME) was positioned in the subphase of a Langmuir trough, close to a dipalmitoyl phosphatidic acid (DPPA) monolayer, and used to generate Ag+ via Ag electro-oxidation. The method involved measuring the transient current-time response at the UME when the electrode was switched to a potential to electrogenerate Ag+. Since the Ag+/Ag couple is reversible, the response is highly sensitive to local mass transfer of Ag+ away from the electrode, which, in turn, is governed by the interaction of Ag+ with the monolayer. The methodology has been used to determine the influence of surface pressure on the adsorption of Ag+ ions at a phospholipid (dipalmitoyl phosphatidic acid) Langmuir monolayer. It is shown that the capacity for metal ion adsorption at the monolayer increased as the density of surface adsorption sites increased (by increasing the surface pressure). A model for mass transport and adsorption in this geometry has been developed to explain and characterise the adsorption process.     

Pyrrolodiazines. 2. Structure and Chemistry of Pyrrolo[1,2-a]pyrazine and 1,3-Dipolar Cycloaddition of Its Azomethine Ylides

A new synthesis of the pyrrolo[1,2-a]pyrazine system from pyrrole is described. In light of the ab initio calculations carried out on this heterocyclic system some of its basic chemistry was investigated and included electrophilic substitution, addition of organolithium reagents, metalation with lithium diisopropylamide and subsequent reaction with electrophiles, and formation of salts by quaternization of the nonbridgehead nitrogen. N-ylides obtained from these salts undergo 1,3-dipolar cycloaddition with suitable dipolarophiles to give dipyrrolo[1,2-a]pyrazines, pyrazolo[1,5-a]-pyrrolo[2,1-c]pyrazines, and heterobetaines. Examples of intramolecular 1,3-dipolar cycloadditions are also reported.     

Enantiospecific synthesis of the (9S,18R)-diastereomer of the leukocyte adhesion inhibitor cyclamenol A

Cyclamenol A is one of the very few non-carbohydrate and non-peptide natural products that inhibit leukocyte adhesion to endothelial cells. We report on the first enantioselective total synthesis of the (9S, 18R)-diastereomer of this macrocyclic polyene lactam. Key elements of the synthesis are i) the synthesis of the required chiral building blocks by employing readily accessible building blocks from the chiral pool, that is, (S)-malic acid and (R)-hydroxyisobutyric acid, ii) assembly of a linear polyene precursor by means of Wittig and Horner olefination reactions as key C-C bond-forming transformations, iii) ring closure by means of a vanadium-mediated pinacolisation reaction and iv) conversion of the generated cis-diol into a (Z)-olefin to complete the entire polyene system of the natural product. Attempts to close the macrocyclic ring by a macrolactamisation, a double Stille coupling or direct olefination in a McMurry reaction failed. Crucial to the successful completion of the synthesis was the correct orchestration of the final steps. It was necessary to first deprotect the intermediate formed after macrocycle formation and to generate the sensitive heptaene system in the last step by means of a Corey-Hopkins sequence.