Fluorescence study of the sol-gel process in hybrid precursors: evidence of concentration fluctuations at the local scale

Hybrid sol-gel materials have been prepared by hydrolytic polycondensation of an alkoxysilane. The sol-gel process of methacryloxypropyltrimethoxysilane (MAPTMS) has been followed by fluorescence spectroscopy with 2-naphthol as a probe. The experimental results showed that this photoprobe was dramatically sensitive to the microenvironment polarity. Spectroscopic studies revealed fluctuations of the maximum emission intensity and wavelength as a function of time. These fluctuations were attributed to the amphiphilic behavior of the hydrolyzed precursor. The maximum emission wavelength of the probe corresponding to its protonated form was higher than in pure water. All the results suggest that the presence of water molecules, tightly bonded to the polar head of the silanols, increased locally the sol polarity and induced a red-shifted emission. Fluorescence spectroscopy emphasized the reversibility of monomeric silanol aggregates and the changes in hydroxy group number of the silica network during the sol maturation. The behavior of this system upon shaking confirmed this statement.     

Gas chromatography/combustion/isotope-ratio-monitoring mass spectrometric analysis of methylboronic derivatives of monosaccharides: a new method for determining natural 13C abundances of carbohydrates

Monosaccharides were derivatized using methylboronic acid and N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA), and the delta13C values of these derivatives measured by gas chromatography/combustion/isotope-ratio-monitoring mass spectrometry to determine the original 13C-content of the monosaccharides. Comparison with the measured off-line delta13 values of the monosaccharides shows that no fractionation in 13C takes place during derivatization. The methylboronic derivatization method has proven to be a new method for natural abundance isotopic analysis of intact monosaccharides (arabinose, xylose, fucose, fructose and glucose). The method is rapid, does not involve isotopic fractionation during derivatization, and gives more precise delta13C values than other methods reported. The method was successfully applied to determine the delta13C value of glucose of the freshwater alga Scenedesmus communis.     

Double aromaticity: aromaticity in orthogonal planes. The 3,5-dehydrophenyl cation.

The $\text{D}$_$\text{3h}$ 3,5-dehydrophenyl cation (I), which may represent the structure of C₆H₃ ions observed mass spectroscopically, illustrates $\text{double aromaticity}$: two different aromatic systems in orthogonal planes.     

Application of Task-specific Ionic Liquids for Intensified Separations

Summary. Ionic liquids offer tremendous opportunities to intensify reactions and separations in process technologies by tuning their physical and chemical properties. Several ionic liquids are suitable for the separation of aromatic and aliphatic hydrocarbons. CO₂ absorption behavior was influenced by the functionalized chains appended to the room temperature ionic liquid (RTIL) cation. Ionic liquids seem able to combine the chemical features of amine solutions with the characteristic advantages of the physical solvents used for CO₂ absorption.     

Das Schwingungsspektrum von Barium-Divanadat

The infrared and laser-Raman spectra of crystalline Ba₂V₂O₇ are reported and discussed by means of a Site Symmetry analysis.

28. Mitt. der Reihe Orthovanadate und verwandte Verbindungen. 27. Mitt.:E. J. Baran undM. E. Escobar, J. Phys. Chem. Solids, im Druck; 26. Mitt.:E. J. Baran, I. L. Botto, J. F. Ramos undP. J. Aymonino, Mh. Chem.109, 1139 (1978); 25. Mitt.:E. J. Baran, J. Mol. Struct.48, 441 (1978); 24. Mitt.:E. J. Baran undI. L. Botto, J. inorg. nucl. Chem.40, 1603, (1978); 23. Mitt.:M. E. Escobar undE. J. Baran, Z. Anorg. allg. Chem.,441, 273 (1978).     

Experimental analysis of floc size distributions in a 1-L jar under different hydrodynamics and physicochemical conditions

This study focuses on the relation among hydrodynamics, physicochemical conditions, and floc size. During ortho-kinetic flocculation, the floc size is controlled by a balance between hydrodynamic stress and aggregate strength. Special attention was paid to the influence of a hydrodynamic sequencing on both the aggregate strength and the flocculation processes. Experimental research was conducted in a 1-L jar for two different pH values. The hydrodynamic sequencing was made up of successive slow and rapid mixing periods, and different slow mixing intensities were studied. First, the large floc size was shown to decrease with increasing velocity gradient (G), with an expected trend (d proportional variant epsilon(-1/4)). Then, the aggregate strength was shown to depend on two main factors: the flocculation history and the physicochemical conditions, which control the cohesion forces between primary particles. Finally, flocculation processes are discussed in terms of aggregation and breakup phenomena, with relation to local hydrodynamics and physicochemical conditions.     

Synthesis and photoluminescent properties of 1,1'-binaphthyl-based chiral phenylenevinylene dendrimers

New chiral, soluble binaphthyl derivatives that incorporate stilbenoid dendrons at the 6,6'-positions have been prepared. The synthesis of the new enantiopure dendrimers was performed in a convergent manner by Horner-Wadsworth-Emmons (HWE) reaction of the appropriately functionalized 1,1'-binaphthyl derivative (R)-1 and the appropriate dendrons (R)(2n)G(n)-CHO. Different electroactive units were incorporated in the peripheral positions of the dendrons in order to tune both the optical and electrochemical behavior of these systems. Fluorescence measurements on the chiral dendrimers reveal a strong emission with maxima between 409 and 508 nm depending upon the substitution pattern. Finally, the redox properties of the dendrimers were determined by cyclic voltammetry, showing the influence of the functional groups at the peripheral positions of the dendrimer on the redox behavior of these systems.     

Donnan equilibrium of ionic drugs in pH-dependent fixed charge membranes: theoretical modeling

We have studied theoretically the partition equilibrium of a cationic drug between an electrolyte solution and a membrane with pH-dependent fixed charges using an extended Donnan formalism. The aqueous solution within the fixed charge membrane is assumed to be in equilibrium with an external aqueous solution containing six ionic species: the cationic drug (DH(+)), the salt cations (Na(+) and Ca(2+)), the salt anion (Cl(-)), and the hydrogen and hydroxide ions. In addition to these mobile species, the membrane solution may also contain four fixed species attached to the membrane chains: strongly acid sulfonic groups (SO(3)(-)), weakly acid carboxylic groups in dissociated (COO(-)) and neutral (COOH) forms, and positively charged groups (COO...Ca(+)) resulting from Ca(2+) binding to dissociated weakly acid groups. The ionization state of the weak electrolyte groups attached to the membrane chains is analyzed as a function of the local pH, salt concentration, and drug concentration in the membrane solution, and particular attention is paid to the effects of the Ca(2+) binding to the negatively charged membrane fixed groups. The lipophilicity of the drug is simulated by the chemical partition coefficient between the membrane and external solutions giving the tendency of the drug to enter the membrane solution due to hydrophobic interactions. Comparison of the theoretical results with available experimental data allows us to explain qualitatively the effects that the pH, salt concentration, drug concentration, membrane fixed charge concentration, and Ca(2+) binding exert on the ionic drug equilibrium. The role of the interfacial (Donnan) electric potential difference between the membrane and the external solutions on this ionic drug equilibrium is emphasized throughout the paper.     

Two Highly Populated Conformations at Room Temperature of Monterine and Granjine, Antitumor Bisbenzylisoquinoline Alkaloids: Origin and Tridimensional Structures

Monterine 1 as well as granjine 3, 1R,1'S configured biphenylic bisbenzylisoquinoline alkaloids, generate two highly populated conformers. The interconversion of two forms was detected by saturation tranfer in (1)H NMR NOEs experiments. Tridimensional structure of the conformers was determined on the basis of (1)H NMR analysis of anisotropic shielding protons, by NOEs measurements and vicinal proton coupling constants of CH1-CH(2)alpha and CH1'-CH(2)alpha'. The structures established from NMR data were further refined to observe the mobility of 3D conformations by molecular dynamics simulation in vacuo. The highly populated conformers, monterine 1a and 1b, as well as granjine 3a and 3b, are interconvertible by rotation about the C1'-Calpha', Calpha'-C9', and C11'-C11 bonds and inversion of the benzyl D ring by reference to CH(2)alpha'. The slow exchange system was investigated by dynamic NMR spectroscopy: DeltaG()(c) 77.9 KJ/mol and k(c) 200 s(-)(1) for monterine 1; DeltaG()(c) 77.7 KJ/mol and k(c) 211 s(-)(1) for granjine 3. Natural and synthetic biphenylic bisbenzylisoquinolines displayed, in vitro, cytotoxic activities against human prostate and breast cancer cell lines.     

Determination of arsenic in mussels by slurry sampling and electrothermal atomic absorption spectrometry (ETAAS)

A method for the determination of arsenic in slurries of mussel tissue using palladium-magnesium nitrate as modifier was optimized. The slurry was stabilized by a 0.015% (v/v) of Triton X-100. To achieve complete mineralization the slurries were ashed at 480 °C for 10s in an air flow (50 ml/min) and at 1200 °C for 15s in an argon flow (300 ml/min) in the presence of Pd—Mg(NO₃)₂ as modifier. The optimum atomization temperature was 2200 °C. The precision and accuracy of the method were studied using the Reference Material BCR n ° 278 Mussel Tissue (Mytilus edulis). The detection limit (LOD) of the final slurry solution was 1 g/l of arsenic corresponding to an arsenic level in the mussel of 1.3 g/g, for a 0.5% (m/v) slurry. Results of calibration using aqueous standards and the standard additions method were compared. The method was applied to the determination of arsenic in mussels from the Galician coast. The levels found lie between 2 and 9.3 g/g of arsenic.