Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

Copper sorption on a straw lignin: experiments and EPR characterization

Spectroscopic and physicochemical data, X-ray photoelectron spectroscopy (XPS), solid-state (13)C cross-polarization magic-angle-spinning NMR, GC/MS, specific surface area, site density, and surface acidity constants have been recorded or determined for a ligno-cellulosic substrate (LS) extracted from straw. Its copper(II)-bound ability has also been studied. The LS solid that exhibits two types of binding sites, carboxylic and phenolic groups, has a great affinity for copper(II), with a maximum of adsorption at around 4 mg g(-1) as early as the pH reaches 6. The structural characterization of the Cu(II) surface complexes has been investigated using EPR spectroscopy. The CuO(4) chromophore of the inner-sphere surface complexes is a slightly distorted square. A surface oxidation occurred simultaneously, which leads to semiquinonic radicals. Furthermore, our empirical approach, which used a correlation between thermodynamics data and EPR parameters, has led to a surface complexation constant log beta equal to 12.6. This indicates that copper(II) surface complexes are relatively stable.     

The 1,2,4-triazolyl cation: thermolytic and photolytic studies

The generation of the 1,2,4-triazolyl cation (1) has been attempted by the thermolysis and photolysis of 1-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridinium tetrafluoroborate (2) and the thermolysis of 1- and 4-diazonium-1,2,4-triazoles, using mainly mesitylene as the trapping agent. Thermolysis of 2 gave mostly 1,2,4-triazole, together with 3-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridine, 4-(1,2,4-triazol-4-ylmethyl)-2,6-dimethylpyridine, and 4-(2,4,6-trimethylbenzyl)-2,6-dimethylpyridine. Thermolysis of each of the diazonium salts in the presence of mesitylene again gave mainly triazole together with very low yields of 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene and the corresponding -4-yl isomer in about the same ratio. On the other hand, photolysis of 2 in mesitylene gave mainly 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene. A photoinduced electron transfer from mesitylene to 2 has been observed and preliminary laser flash photolyses of 2 and the corresponding 2,4,6-triphenylpyridinium salt have been carried out. The observed transients are explained as arising from the first excited states of the pyridinium salts rather than from 1. Ab initio MO calculations are reported and indicate that the predicted electronic ground-state of the triazolyl cation is a triplet state of B1 symmetry with five pi electrons, which corresponds to a diradical cation (1c). Possible mechanisms for the formation of the various products are proposed.     

Quality through the pharmaceutical chain of care

Many medical professionals are involved in patient care processes. For pharmaceutical care this results in many information transfer moments. To provide optimal care, communication and information the transfer should be conducted in a timely manner, fully transparent, complete and relevant. The TRANSFORM project is directed towards the development of a reference information model of the pharmaceutical care chain with the aim to improve the availability (time, place, completeness) and access of pharmaceutical information regarding patients, thereby resulting in continuity and quality of pharmaceutical care, reduction in medical errors and improvement in patient safety through the design of a safer healthcare system. TRANSFORM leads to improved insight into the processes and data transfer points in the pharmaceutical chain of care. Focussed on laboratory medicine and pharmacy, the implementation of the integration of laboratory test and pharmacy information may result in major improvements in drug therapy monitoring and guidance (i.e. drug impact monitoring). Because of the overwhelming amount of data generated by this integration of drugs, drug effects and laboratory test results, an online decision support system is warranted.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.The following paper may appear at first sight not to be specifically within the realm of ACQUAL. It has been accepted for publication anyway as it is about reliable handling of data, incl. measurement results, which lead to important decisions (in this case related to a patient). The reliability of handling (a large amount of) measurement results towards a basis for important decisions, is a very important feature of the use of such results.Paul De Bièvre, Editor in Chief     

Assessing weak intramolecular donor-acceptor interactions using 1H-117Sn J-HMQC spectroscopy

It is demonstrated that long-range nJ(1H,117Sn) coupling constants down to 0.3 Hz, can be accurately quantified from non-linear fitting of the sine modulation of the associated 1H-117Sn correlation cross-peak intensities sampled as a function of the heteronuclear antiphase coherence preparation time in the 1H-117Sn J-HMQC pulse sequence. The contribution of additional, undesired modulations is illustrated and assessed using the product operator formalism, and is traced back to contributions that arise from miss-setting of the wandering 180 degrees pulse angle in the constant time period. The power of the method and its use in the characterization of weak intramolecular donor-acceptor interactions are illustrated by the determination of long-range nJ(1H,117Sn) coupling constants of bis[3-(dimethylamino)propyl]tin derivatives, [Me2N(CH2)3]2SnR2 (', R = Me; 3, R = Ph; 4, R = t-Bu). By comparing these with the values found for the corresponding bis(4-methylpentyl)tin derivatives, [Me2CH(CH2)3]2SnR2 (2', R = Me; 3', R = Ph), which lack such interactions, the use of long-range coupling constants to detect intramolecular donor-acceptor interactions is evaluated. It is concluded that nJ(1H,117Sn) couplings up to six bonds through an organic carbon chain can be quantified, whether donor-acceptor interactions are present or not. Furthermore, evidence is presented that, when two scalar coupling pathways co-exist, the pathway involving an intramolecular donor-acceptor interaction can have opposite sign, thus decreasing the overall coupling constant to a value smaller than that actually measured in the absence of a donor-acceptor interaction, where only one coupling pathway is active. There is nevertheless clear numerical value discrimination in the series of compounds investigated between long-range couplings in derivatives without weak intramolecular donor-acceptor interactions and those where such interactions can exist.     

Computational study of the reaction of N(2D) atoms with CH2F radicals: an example of a barrier-free reaction involving very high internal energies

The singlet potential-energy surface for the N(2D)+CH2F(2A') reaction has been studied employing both second-order M?ller-Plesset and density-functional theories. The energies of the involved species have been refined using the Gaussian-2, complete basis set, and coupled-cluster singles and doubles (triples) methods. The reaction proceeds through the formation of an initial intermediate, which does not involve any activation barrier. Based on the energy profile for the singlet potential-energy surface, the preferred product should be the most exothermic one, namely, HCN+HF, followed by HNC+HF and FCN+H2. This result seems in contradiction with a computational study of the kinetics of the title reaction in terms of the statistical theories, which leads to the prediction that the production of HNC+HF should be the dominant channel. Consequently, a limited molecular-dynamics study has been carried out, concluding that in fact the system behaves in a nonstatistical way. According to the molecular-dynamics study, the most exothermic channel, HCN+HF, should be the dominant one. An analysis of the possible role of the singlet surface in the reaction of N(4S) with CH2F(2A') has also been carried out. The computational study shows that the microcanonical coefficients for the nonadiabatic channels are much smaller than the competing adiabatic ones. Therefore, the reaction of N(4S) with CH2F(2A') should proceed on the triplet surface without spin change.     

Using second-order calibration to identify and quantify aromatic sulfonates in water by high-performance liquid chromatography in the presence of coeluting interferences

We used the Generalized Rank Annihilation Method (GRAM), a second-order calibration method, to quantify aromatic sulfonates in water with high-performance liquid chromatography (HPLC) when interferences coeluted with the analytes of interest. With GRAM, we can quantify in only two chromatographic analyses, one for a calibration sample and one for the unknown sample. The calculated concentrations were not statistically different to those obtained when the chromatographic separation of the unknown sample was modified in order to completely separate the analyte from the interferences before univariate calibration. With GRAM, the concentrations are determined much more quickly because a complete resolution is not required.     

Synthesis of pyrazine alcaloids from Botryllus leachi. Diazines 43

[reaction: see text] Regioselective metalation of pyrazines and cross-coupling reactions provides an easy access to botryllazines A and B and to an isomer of botryllazine A with good yields from chloropyrazine.     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

Self-consistent-field – Hartree–Fock method with finite nuclear mass corrections

We have upgraded a Self-consistent-field – Hartree–Fock routine to include a finite nuclear mass correction for molecules developed in our laboratory. The new routine can handle isotopomers without calculating any nuclear kinetic energy matrix element. Tests on H₂, LiH, HF, F₂, and H₂O isotopomers indicate the equivalence of our correction to the standard diagonal adiabatic correction. A further original application to C₂H₆ illustrates the usefulness of the method for polyatomic molecules. The resulting molecular orbitals carry the nuclear mass signature, exemplified with Koopmans ionization potentials.From the Proceedings of the 28th Congreso de Químicos Teóricos de Expresión Latina (QUITEL 2002)