Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

A combined transient and steady state approach for robust lifetime spectroscopy with micrometer resolution

We present the combination of two complementary micro‐photoluminescence spectroscopic techniques operating in transient and steady state condition, respectively. Introducing the time domain into the well‐established micro‐photoluminescence mapping approach operating under steady state conditions demonstrates a distinct improvement of the robustness and reliability in the determination of charge carrier lifetime measured with micrometer spatial resolution. Lifetimes from 50 ns to above ms are accessible. We elaborate a calibration procedure and apply the combined all‐photoluminescence setup to high‐performance multicrystalline silicon. A lifetime image obtained from the established photoluminescence imaging technique is reconstructed from the microscopic map by considering lateral diffusion and optical blurring, revealing a more detrimental influence of small angle grain boundaries as well as a higher lifetime within grains as may be deduced from the standard imaging technique. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

A Bis(pyridine N‐oxide) Analogue of DOTA: Relaxometric Properties of the GdIII Complex and Efficient Sensitization of Visible and NIR‐Emitting Lanthanide(III) Cations Including PrIII and HoIII

We report the synthesis of a cyclen‐based ligand (4,10‐bis[(1‐oxidopyridin‐2‐yl)methyl]‐1,4,7,10‐tetraazacyclododecane‐1,7‐diacetic acid= L1 ) containing two acetate and two 2‐methylpyridine N‐oxide arms anchored on the nitrogen atoms of the cyclen platform, which has been designed for stable complexation of lanthanide(III) ions in aqueous solution. Relaxometric studies suggest that the thermodynamic stability and kinetic inertness of the Gd^III complex may be sufficient for biological applications. A detailed structural study of the complexes by ¹H NMR spectroscopy and DFT calculations indicates that they adopt an anti‐Δ(λλλλ) conformation in aqueous solution, that is, an anti‐square antiprismatic (anti‐SAP) isomeric form, as demonstrated by analysis of the ¹H NMR paramagnetic shifts induced by Yb^III. The water‐exchange rate of the Gd^III complex is ${k{{298\hfill \atop {\rm ex}\hfill}}}$ =6.7×10⁶ s^?1, about a quarter of that for the mono‐oxidopyridine analogue, but still about 50 % higher than the ${k{{298\hfill \atop {\rm ex}\hfill}}}$ of GdDOTA (DOTA=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The 2‐methylpyridine N‐oxide chromophores can be used to sensitize a wide range of Ln^III ions emitting in both the visible (Eu^III and Tb^III) and NIR (Pr^III, Nd^III, Ho^III, Yb^III) spectral regions. The emission quantum yield determined for the Yb^III complex (${Q{{{\rm L}\hfill \atop {\rm Yb}\hfill}}}$ =7.3(1)×10^?3) is among the highest ever reported for complexes of this metal ion in aqueous solution. The sensitization ability of the ligand, together with the spectroscopic and relaxometric properties of its complexes, constitute a useful step forward on the way to efficient dual probes for optical imaging (OI) and MRI.     

Physicochemical properties of SARS-CoV-2 for drug targeting,virus inactivation and attenuation,vaccine formulation and quality control

The material properties of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its proteins are discussed. We review the viral structure, size, rigidity, lipophilicity, isoelectric point, buoyant density and centrifugation conditions, stability against pH, temperature, UV light, gamma radiation, and susceptibility to various chemical agents including solvents and detergents. Possible inactivation, downstream, and formulation conditions are given including suitable buffers and some first ideas for quality-control methods. This information supports vaccine development and discussion with competent authorities during vaccine approval and is certainly related to drug-targeting strategies and hygienics. Several instructive tables are given, including the pI and grand average of hydropathicity (GRAVY) of SARS-CoV-1 and -2 proteins in comparison. SARS-CoV-1 and SARS-CoV-2 are similar in many regards, so information can often be derived. Both are unusually stable, but sensitive at their lipophilic membranes. However, since seemingly small differences can have strong effects, for example, on immunologically relevant epitope settings, unevaluated knowledge transfer from SARS-CoV-1 to SARS-CoV-2 cannot be advised. Published knowledge regarding downstream processes, formulations and quality assuring methods is, as yet, limited. However, standard approaches employed for other viruses and vaccines seem to be feasible including virus inactivation, centrifugation conditions, and the use of adjuvants.     

Tuning PtII-Based Donor–Acceptor Systems through Ligand Design: Effects on Frontier Orbitals,Redox Potentials,UV/Vis/NIR Absorptions,Electrochromism, and Photocatalysis

Asymmetric platinum donor–acceptor complexes [(pimp)Pt(Q²⁻)] are presented in this work, in which pimp=[(2,4,6-trimethylphenylimino)methyl]pyridine and Q²⁻=catecholate-type donor ligands. The properties of the complexes are evaluated as a function of the donor ligands, and correlations are drawn among electrochemical, optical, and theoretical data. Special focus has been put on the spectroelectrochemical investigation of the complexes featuring sulfonyl-substituted phenylendiamide ligands, which show redox-induced linkage isomerism upon oxidation. Time-dependent density functional theory (TD-DFT) as well as electron flux density analysis have been employed to rationalize the optical spectra of the complexes and their reactivity. Compound 1 ([(pimp)Pt(Q²⁻)] with Q²⁻=3,5-di-tert-butylcatecholate) was shown to be an efficient photosensitizer for molecular oxygen and was subsequently employed in photochemical cross-dehydrogenative coupling (CDC) reactions. The results thus display new avenues for donor–acceptor systems, including their role as photocatalysts for organic transformations, and the possibility to introduce redox-induced linkage isomerism in these compounds through the use of sulfonamide substituents on the donor ligands.     

trans‐Selective Insertional Dihydroboration of a cis‐Diborene: Synthesis of Linear sp3‐sp2‐sp3‐Triboranes and Subsequent Cationization

The reaction of aryl‐ and amino(dihydro)boranes with dibora[2]ferrocenophane 1 leads to the formation 1,3‐trans‐dihydrotriboranes by formal hydrogenation and insertion of a borylene unit into the B=B bond. The aryltriborane derivatives undergo reversible photoisomerization to the cis‐1,2‐μ‐H‐3‐hydrotriboranes, while hydride abstraction affords cationic triboranes, which represent the first doubly base‐stabilized B₃H₄⁺ analogues.     

Crystal and Molecular Structure of 3-Methoxy-estra-1,3,5(10)-trien-17β-ol

The crystal structure determination of the title compound was undertaken to determine the conformational flexibility of the steroid skeleton. 3-Methoxy-estra-1,3,5(10)-trien-17β-ol (C₁₉H₂₆O₂) crystallizes in the space group P2₁2₁2₁ with Z = 12, a = 12.589(2), b = 16.274(5), and c = 23.535(6) Å. The structure was solved by direct methods and refined to R = 0.056. Three symmetry independent molecules having different molecular conformations were observed in the crystal. The most flexible region of the molecules is the B ring which adopts following conformations: 7α,8β-half-chair, 8β-sofa, and an intermediate form between half-chair and sofa.     

On the bindings in the crystal phases of Mn

The heterotypism of Mn may be interpreted energetically when a temperature dependent valence electron concentration is supposed which takes on values between 2.2 and 0.6 electrons per atom. The room temperature phase Mn.r (= αMn) belongs to a series of structural types: Cr₃Si, U.h₁ (= βU), Mn.r, which occur in alloy systems such as MoRe_M (M = undetermined mole number) at certain values of the averaged group number (AGN) of the perodic system of chemical elements (rule of Raub). An interpretation of the series by means of the plural-correlations model becomes possible when instead of the (Ekmanian) AGN count another (non-Ekmanian) electron count is used. The phase Mo₃Re (Cr₃Si-type) yields a simple bonding type (binding) which undergoes moderate transformations to form the phases Mo₂Re₃(U.h₁) and MoRe₃(Mn.r) and the binding of MoRe₃ may be taken to be valid also for Mn.r; it corresponds to the valence electron concentration N′^A_b = 2.16. For the high temperature phases Mn.h₁ (= βMn) and Mn.h₂ (= γMn) the values N′^A_b = 1.6 and 1.0 are probable and allow the brass-like structures Mn.h₁ (C20) and Cu(Fl). The binding of Mn.h₂, incidentally, explains the occurrence of the tetragonal metastable phase Mn.m. finally Mn.h₃ (= δMn) crystallizing in the W-type is isodesmic to Fe.h₂ (= δFe), i.e. of the same binding.