Role of electron-transfer processes in reactions of diarylcarbenium ions and related quinone methides with nucleophiles

Second-harmonic alternating current voltammetry has been used to determine one-electron reduction potentials of 15 diarylcarbenium ions and 5 structurally analogous quinone methides, which have been employed as reference electrophiles for the development of nucleophilicity scales. A linear correlation (r(2) = 0.993) between the empirical electrophilicity parameters E and the reduction potentials in acetonitrile (E = 14.091E degrees (red) - 0.279) covering a range of 1.64 V (or 158 kJ mol(-)(1)) has been observed. For a large number of nucleophiles, it has been demonstrated that the observed activation free energies of the electrophile-nucleophile combinations are 61-195 kJ mol(-)(1) smaller than the free energy change of electron transfer from nucleophile to electrophile, which definitely excludes outer-sphere electron transfer occurring during these reactions.     

Purification of cellulosic pulp by hot water extraction

Hot water extraction (HWE) of pulp in a flow-through reactor was evaluated as a method to purify paper-grade pulps. About 50–80 % of the xylan and up to 50 % of the lignin in unbleached birch Kraft pulp was extracted by the HWE without losses in cellulose yield. The residual xylan content in the extracted pulps was predominantly too high for dissolving-grade applications, but some of the pulps with a xylan content of 5–7 % might still be suitable as rayon-grade pulps. Increasing extraction temperature lowered the xylan content at which cellulose yield started to decrease. Furthermore, at any given xylan content, increasing extraction temperature resulted in cellulosic pulp with higher degree of polymerization. The extracted xylan was recovered almost quantitatively as xylo-oligosaccharides. The results suggest that HWEs at elevated temperatures may be applied to purify cellulosic pulps, preferably containing a low xylan content, and to recover the extracted sugars.     

Ambident reactivity of the thiocyanate anion revisited: can the product ratio be explained by the hard soft acid base principle?

Laser flash photolysis and stopped-flow methods have been employed to determine the kinetics of the reactions of benzhydrylium ions with both termini of the thiocyanate ion. In contrast to previous investigations which reported sulfur/nitrogen ratios of k(S)/k(N) = 2-10 for the reactions of carbocations with SCN(-), values of k(S)/k(N) = 10(3)-10(4) are now derived from absolute rate constants. This discrepancy is explained by the fact that the data determined in this investigation are the first which refer to activation-controlled attack of carbocations at both termini of the thiocyanate ion, while previous reactivity ratios included diffusion-controlled reactions. It is concluded that the selectivities of the reactions of carbocations with the thiocyanate ion cannot be explained by the hard soft acid base principle.     

ZIF-8 degrades in cell media,serum, and some—but not all—common laboratory buffers

ABSTRACT

Drug delivery using metal-organic frameworks (MOF) has elicited interest in their biocompatibility; however, few studies have been conducted on their stability in common buffers, cell media, and blood proteins. In particular, the use of ZIF-8, a MOF interconnected by Zn and methylimidazole, has been frequently employed. In this study, we tested single crystals of ZIF-8 with common laboratory buffers, cell media, and serum, and noted several issues. Buffers containing phosphate and bicarbonate alter the appearance and composition of ZIF-8; however, these buffers do not appear to cause cargo to leak out even when the ZIF-8 itself is displaced by phosphates. On the other hand, serum dissolves ZIF-8, causing premature cargo release. Our results show that ZIF-8 undergoes surface chemistry changes that may affect the interpretation of cellular uptake and cargo release data. On the other hand, it provides a rational explanation as to how ZIF-8 neatly dissolves in vivo.     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.     

Investigation of drift gas selectivity in high resolution ion mobility spectrometry with mass spectrometry detection

Recent studies in electrospray ionization (ESI)/ion mobility spectrometry (IMS) have focussed on employing different drift gases to alter separation efficiency for some molecules. This study investigates four structurally similar classes of molecules (cocaine and metabolites, amphetamines, benzodiazepines, and small peptides) to determine the effect of structure on relative mobility changes in four drift gases (helium, nitrogen, argon, carbon dioxide). Collision cross sections were plotted against drift gas polarizability and a linear relationship was found for the nineteen compounds evaluated in the study. Based on the reduced mobility database, all nineteen compounds could be separated in one of the four drift gases, however, the drift gas that provided optimal separation was specific for the two compounds.     

Syntheses, structures, and surface aromaticity of the new carbaalane [(AlH)(6)(AlNMe(3))(2)(CCH(2)R)(6)] (R = Ph, CH(2)SiMe(3)) and a stepwise functionalization of the inner and outer sphere of the cluster

The reaction of the acetylene RC triple bond CH (R = Ph, CH(2)SiMe(3)) with an excess of AlH(3).NMe(3) in boiling toluene leads to the carbaalane [(AlH)(6)(AlNMe(3))(2)(CCH(2)R)(6)] (R = Ph 1, CH(2)SiMe(3) 2) in good yield. Treatment of 2 with BCl(3) under varying conditions gives the chlorinated products [(AlCl)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(3))(6)] 3 and [(AlCl)(6)(AlNMe(3))(2)(CCH(2)CH(2)SiMe(2)Cl)(6)] 4, respectively. The latter clearly demonstrates that the cluster can be stepwise functionalized within the inner and outer sphere. The X-ray single-crystal structures of 1, 2, and 4 have been determined. All compounds have in common that the central core consists of a cluster having eight aluminum and six carbon atoms. The bonding properties in this cluster are described as a new manifestation of three-dimensional surface aromaticity. Each Al(4)C fragment of the cube is formed by four bonds with three electron pairs, thus leading to a strong delocalization of the electrons. A phenomenological modeling using a three-dimensional Hückel scheme with fitted parameters to reproduce the energies from ab initio calculations revealed that the orbital scheme localized at one Al(4)C fragment possesses an orbital sextet with a large HOMO-LUMO gap. This is in line with the criteria of aromaticity. The idea of aromaticity was sustained also by qualitative valence bond reasons enumerating the different resonance structures by means of graph theoretical methods.     

Influence of increasing zinc contents in brass in the early stages of corrosion investigated by in-situ TM-AFM and SIMS

In-situ tapping mode atomic force microscopy (TM-AFM), a powerful, high-resolution imaging technique for determining the structure of surfaces and ex-situ secondary ion mass spectroscopy (SIMS), a multielement, high-depth-resolution method, were used to examine the influence of increasing zinc contents in brass in the early stages of corrosion. Four different samples (pure Cu, pure Zn, Cu/Zn=90/10 wt% and Cu/Zn=70/30 wt%) were studied in order to determine their chemical behaviour under various atmospheric conditions. The in-situ TM-AFM investigations were carried out in synthetic air with 60% relative humidity (RH) and 80% RH with 250 ppb SO(2). The samples for the ex-situ SIMS experiments were weathered over a period of 60 h in 80% RH and 250 ppb SO(2). The in-situ TM-AFM investigations have shown that an increasing Zn content in brass increases the corrosion rate.     

Isothermal titration calorimetric studies of surfactant interactions with negatively charged, ‘hairy’ latex nanoparticles

Isothermal titration calorimetry (ITC) measurements of the mixture of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) with negatively charged, hairy copolymer latices (poly-(2,3-epoxypropylmethacrylate-co-methacrylic acid) in different ratio) at high water excess indicate a monomer adsorption mechanism of CTAB by the polymer particles. The number of adsorbed CTAB molecules at saturation corresponds approximately to the number of negative elementary charges bound at the surface of the latices. The mixing enthalpy is the sum of demicellization and sorption enthalpies. At 25 °C for CTAB the demicellization enthalpy amounts to 10 kJ/mol, whereas the adsorption enthalpy varies from –7 kJ/mol (surface charge density of the latices =–0.37 C/m²) to +3 kJ/mol (=–0.085 C/m²). The hydrodynamic radius R_H of the latex particles upon titration of cationic detergent and salt (NaBr) decreases by about 2 nm until the onset of aggregation near the isoelectric point. Titration of nonionic or anionic detergents has much less influence on the hydrodynamic radius and produces no measurable adsorption heat. The results are consistent within a model of latex particles with extended negatively charged polymer chains interacting predominantly via Coulombic forces with detergents.