Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.     

Lipid modifications of a Ras peptide exhibit altered packing and mobility versus host membrane as detected by 2H solid-state NMR

The human N-ras protein binds to cellular membranes by insertion of two covalently bound posttranslational lipid modifications, which is crucial for its function in signal transduction and cell proliferation. Mutations in ras may lead to unregulated cell growth and eventually cancer, making it an important therapeutic target. Here we have investigated the molecular details of the membrane binding mechanism. A heptapeptide derived from the C-terminus of the human N-ras protein was synthesized including two hexadecyl modifications. Solid-state 2H NMR was used to determine the packing and molecular dynamics of the ras lipid chains as well as the phospholipid matrix. Separately labeling the chains of the peptide and the phospholipids with 2H enabled us to obtain atomically resolved parameters relevant to their structural dynamics. While the presence of ras only marginally affected the packing of DMPC membranes, dramatically lower order parameters (S(CD)) were observed for the ras acyl chains indicating modified packing properties. Essentially identical projected lengths of the 16:0 ras chains and the 14:0 DMPC chains were found, implying that the polypeptide backbone is located at the lipid-water interface. Dynamical properties of both the ras and phospholipid chains were determined from spin-lattice 2H relaxation (R1Z) measurements. Plots of R1Z rates versus the corresponding squared segmental order parameters revealed striking differences. We propose the ras peptide is confined to microdomains containing DMPC chains which are in exchange with the bulk bilayer on the 2H NMR time scale (approximately 10(-5) s). Compared to the host DMPC matrix, the ras lipid modifications are extremely flexible and undergo relatively large amplitude motions. It is hypothesized that this flexibility is a requirement for the optimal anchoring of lipid-modified proteins to cellular membranes.     

Hydroxyphenyl-1-methylpyridinium-jodide als potentielle Reaktivatoren von mit Organophosphor-Verbindungen vergifteten Acetylcholinesterasen

Hydroxyphenyl-1-methylpyridinium-iodide as Potential Reactivators of Acetylcholinesterase Poisoned with Organophosphorus Compounds . It was our aim to reactivate acetylcholinesterase poisoned with sarin. We synthesized 2-(o-hydroxyphenyl)-1-methylpyridinium-iodide ( 9 ), 2-(p-hydroxyphenyl)-1-methylpyridinium-iodide ( 19 ) and 4-(o-hydroxyphenyl)-1-methylpyridinium-iodide ( 14 ) as potential reactivators. All substances showed moderate toxicity against mice; their reactivity potency in vitro and in vivo was negligible.     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

How constant are Ritchie's "constant selectivity relationships"? A general reactivity scale for n-, pi-, and sigma-nucleophiles

The kinetics of 82 reactions of benzhydrylium ions (Ar(2)CH(+)) with n-nucleophiles has been determined at 20 degrees C. Evaluation by the equation log k = s(N + E) delivered the reactivity parameters N and s for 15 n-nucleophiles (water, hydroxide, amines, etc.). All nucleophiles except water (s = 0.89) and (-)SCH(2)CO(2)(-) (s = 0.43) have closely similar slope parameters (0.52 < s < 0.71), indicating that the reactions of most n-nucleophiles approximately follow Ritchie's constant selectivity relationship (s = constant). The different slope parameter for water is recognized as the main reason for the deviations from the Ritchie relationship reported in 1986. Correlation analysis of the rate constants for the reactions of benzhydrylium ions with the n-nucleophiles (except H(2)O) on the basis of Ritchie's equation log k = N(+) + log k(0) yields a statistically validated set of N(+) parameters for Ritchie-type nucleophiles and log k(0) parameters for benzhydrylium ions. The N and s parameters of the n-nucleophiles derived from their reactions with benzhydrylium ions were combined with literature data for the reactions of these nucleophiles with other carbocations to yield electrophilicity parameters E for tritylium, tropylium, and xanthylium ions. While the E parameters for tropylium and xanthylium ions appear to be generally applicable, it is demonstrated that the E parameters of tritylium ions can be used to predict reactivities toward n-nucleophiles as well as hydride transfer rate constants but not rates for the reactions of tritylium ions with pi-nucleophiles. It is now possible to merge the large data sets determined by Ritchie and others with our kinetic data and present a nucleophilicity scale comprising n- (e.g., amines), pi- (e.g., alkenes and arenes), and sigma-nucleophiles (e.g., hydrides).     

Synthesis and structural characterization of a terminal hydroxide containing alumoxane via hydrolysis of aluminum hydrides

A novel terminal hydroxide containing dinuclear alumoxane LAl(OH)OAlL(OCH=N-tBu) (3; L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3) was prepared by treatment of aluminum dihydride LAlH2 (1) and tert-butyl isocyanate in the presence of trace amounts of water and alternatively from 1 and LAlH(OCH=N-tBu) (2) with water. Compound 2 was obtained from the reaction of 1 and tert-butyl isocyanate.     

The use of the isotropic orientation factor in fluorescence resonance energy transfer (FRET) studies of the actin filament

A Dale-Eisinger style analysis (R. E. Daleet al., Biophys. J. 26, 161, 1979) is used to produce three-dimensional plots that display the limits on the average orientation factor k ² that is required to calculate molecular distances in F-actin from fluorescence resonance energy transfer measurements. Maxima and minima plots are generated for the transfer of energy from a donor to a single acceptor and for transfer to multiple acceptors that are related by F-actin helical symmetry. The analysis is performed in terms of dipole cone half-angles rather than depolarization factors, in order to facilitate the modeling of the multiple acceptor problem. Calculations are carried out under the restrictive condition of a single electric dipole moment per fluorophore. In addition, both surface and volume averaging of the donor and acceptor dipoles are considered. Comparisons between the plots show that for the multiple acceptor cases with F-actin symmetry, there is a great reduction in the range for maxima and minima limits on k ². The calculations also suggest guidelines for the choice of fluorescence label that will result in an average orientation factor occurring within acceptable limits, i.e., inside the limits for which k ²=2/3 may be employed. Thus, without having detailed knowledge of the mean donor or acceptor dipole relative orientations, the use of k ²=2/3 in radial coordinate studies of F-actin is more than reasonable and is fairly assured of being correct.     

FLASH—A superluminal communicator based upon a new kind of quantum measurement

The FLASH communicator consists of an apparatus which can distinguish between plane unpolarized (PUP) and circularly unpolarized (CUP) light plus a simple EPR arrangement. FLASH exploits the peculiar properties of measurements of the Third Kind. One purpose of this article is to focus attention on the operation of idealized laser gain tubes at the one-photon limit.FLASH: acronym for First Laser-Amplified Superluminal Hookup.     

2-(1-Azulyl)ethyl tosylate methylene scrambling in the gas phase. Similarities to solution chemistry

The methylene groups in 2-(1-azulyl)ethyl tosylate are largely scrambled prior to formation of fragment ions in the mass spectrometer. This process also occurs in the 3-nitro analog, where it is dependent on sample residence time in the source and independent of electron energy. It could not be observed with the isomeric 6-substituted tosylates, the 1-substituted acetates or alcohols, or with 2-(p-anisyl)ethyl tosylate. Scrambling occurs in the neutral molecule prior to ionization and a mechanism involving absorption onto the metal surface and formation of a complexed ethylenazulonium ion is suggested.