Inclusion Complexes of Cyproterone Acetate with Cyclodextrins in Aqueous Solution

Cyproterone acetate (CPA) is a steroidal antiandrogen with a progestogenic activity. Given that this molecule has a very poor water solubility (2.1 g/mL), different cyclodextrins (CDs) were tested to form inclusion complexes and to increase solubility. Two different techniques were compared to study the affinity between CPA and CDs: phase-solubility studies and NMR spectroscopy. The stoichiometry and the stability constant could be determined for most complexes with the aid of phase-solubility studies. The greatest increase in solubility was achieved with the methylated -CDs, but hydroxypropylated - and -CDs also gave enhanced solubilities. ¹H-NMR studies showed a solubility increase similar to that found with phase-solubility studies. The proof of inclusion in the2,6-dimethyl--CD (DIMEB) was shown by ¹H-NMR and t-ROESY spectra.     

Decarbonylative ether dissection by iridium pincer complexes

A unique chain-rupturing transformation that converts an ether functionality into two hydrocarbyl units and carbon monoxide is reported, mediated by iridium(i) complexes supported by aminophenylphosphinite (NCOP) pincer ligands. The decarbonylation, which involves the cleavage of one C–C bond, one C–O bond, and two C–H bonds, along with formation of two new C–H bonds, was serendipitously discovered upon dehydrochlorination of an iridium(iii) complex containing an aza-18-crown-6 ether macrocycle. Intramolecular cleavage of macrocyclic and acyclic ethers was also found in analogous complexes featuring aza-15-crown-5 ether or bis(2-methoxyethyl)amino groups. Intermolecular decarbonylation of cyclic and linear ethers was observed when diethylaminophenylphosphinite iridium(i) dinitrogen or norbornene complexes were employed. Mechanistic studies reveal the nature of key intermediates along a pathway involving initial iridium(i)-mediated double C–H bond activation.

A unique chain-rupturing transformation that converts an ether functionality into two hydrocarbyl units and carbon monoxide is reported.     

On the viability of small endohedral hydrocarbon cage complexes: X@C4H4, X@C8H8, X@C8H14, X@C10H16, X@C12H12, AND X@C16H16

Small hydrocarbon complexes (X@cage) incorporating cage-centered endohedral atoms and ions (X = H(+), H, He, Ne, Ar, Li(0,+), Be(0,+,2+), Na(0,+), Mg(0,+,2+)) have been studied at the B3LYP/6-31G(d) hybrid HF/DFT level of theory. No tetrahedrane (C(4)H(4), T(d)()) endohedral complexes are minima, not even with the very small hydrogen atom or beryllium dication. Cubane (C(8)H(8), O(h)()) and bicyclo[2.2.2]octane (C(8)H(14), D(3)(h)()) minima are limited to encapsulating species smaller than Ne and Na(+). Despite its intermediate size, adamantane (C(10)H(16), T(d)()) can enclose a wide variety of endohedral atoms and ions including H, He, Ne, Li(0,+), Be(0,+,2+), Na(0,+), and Mg(2+). In contrast, the truncated tetrahedrane (C(12)H(12), T(d)()) encapsulates fewer species, while the D(4)(d)() symmetric C(16)H(16) hydrocarbon cage (see Table of Contents graphic) encapsulates all but the larger Be, Mg, and Mg(+) species. The host cages have more compact geometries when metal atoms, rather than cations, are inside. This is due to electron donation from the endohedral metals into C-C bonding and C-H antibonding cage molecular orbitals. The relative stabilities of endohedral minima are evaluated by comparing their energies (E(endo)) to the sum of their isolated components (E(inc) = E(endo) - E(cage) - E(x)) and to their exohedral isomer energies (E(isom) = E(endo) - E(exo)). Although exohedral binding is preferred to endohedral encapsulation without exception (i.e., E(isom) is always exothermic), Be(2+)@C(10)H(16) (T(d)(); -235.5 kcal/mol), Li(+)@C(12)H(12) (T(d)(); 50.2 kcal/mol), Be(2+)@C(12)H(12) (T(d)(); -181.2 kcal/mol), Mg(2+)@C(12)H(12) (T(d)(); -45.0 kcal/mol), Li(+)@C(16)H(16) (D(4)(d)(); 13.3 kcal/mol), Be(+)@C(16)H(16) (C(4)(v)(); 31.8 kcal/mol), Be(2+)@C(16)H(16) (D(4)(d)(); -239.2 kcal/mol), and Mg(2+)@C(16)H(16) (D(4)(d)(); -37.7 kcal/mol) are relatively stable as compared to experimentally known He@C(20)H(20) (I(h)()), which has an E(inc) = 37.9 kcal/mol and E(isom) = -35.4 kcal/mol. Overall, endohedral cage complexes with low parent cage strain energies, large cage internal cavity volumes, and a small, highly charged guest species are the most viable synthetic targets.     

Homonuclear transition-metal trimers

Density-functional theory has been used to determine the ground-state geometries and electronic states for homonuclear transition-metal trimers constrained to equilateral triangle geometries. This represents the first application of consistent theoretical methods to all of the ten 3d block transition-metal trimers, from scandium to zinc. A search of the potential surfaces yields the following electronic ground states and bond lengths: Sc3(2A1',2.83 A), Ti3(7E',2.32 A), V3(2E",2.06 A), Cr3(17E',2.92 A), Mn3(16A2',2.73 A), Fe3(11E",2.24 A), Co3(6E",2.18 A), Ni3(3A2",2.23 A), Cu3(2E',2.37 A), and Zn3(1A1',2.93 A). Vibrational frequencies, several low-lying electronic states, and trends in bond lengths and atomization energies are discussed. The predicted dissociation energies DeltaE(M3-->M2+M) are 49.4 kcal mol(-1)(Sc3), 64.3 kcal mol(-1)(Ti3), 60.7 kcal mol(-1)(V3), 11.5 kcal mol(-1)(Cr3), 32.4 kcal mol(-1)(Mn3), 61.5 kcal mol(-1)(Fe3), 78.0 kcal mol(-1)(Co3), 86.1 kcal mol(-1)(Ni3), 26.8 kcal mol(-1)(Cu3), and 4.5 kcal mol(-1)(Zn3).     

Pore formation during the pyrolysis of C-Nb2O5 and C-Ta2O5 xerogels

Binary organic-inorganic gels have been prepared by mixing a carbonaceous hydrosol and a Nb₂O₅ or Ta₂O₅ sol derived by hydrolysis of the alkoxides. The gels are pyrolyzed under an inert atmosphere into precursors in which carbon and the metal oxides are mixed very intimately. High temperature treatment converts the precursors into the cubic face centered carbides. The precursors as well as the carbides have been shown to be micro- and mesoporous materials. Measurements of nitrogen adsorption reveal a characteristic change of the shapes of the isotherms (Type I Type IV) and of the hysteresis loops (H4H2H1) during the thermal processes. Pore widening has been observed with rising temperature. The phenomena of crystallization, carbothermal reduction and sintering were found to control the pore shape and size. The results of the adsorption measurement correlate well with those of the thermoanalytical and X-ray diffraction studies.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Reactivite des carbanions benzyliques : VIII. Etude de la structure d'alkyl-9 lithio-10 dihydro-9,10 anthracenes par rmn du proton et spectrometrie d'absorption electronique; influence du substituant,du solvant et de la temperature

The structure of the 9,10-dihydroanthracenyl anion and of a series of 9-alkyl-10-lithio-9-10-dihydroanthracenes (9-R-10-LiDHA, I–V where R = H, Me, Et, i-Pr, t-Bu) was studied in solution by electronic absortion spectrometry and proton magnetic resonance. Our electronic absorption results, in addition to those of other authors, show that the contact ion pairs (c.i.p.) have an absorption at λ_max}- 400 nm (I–III) and 415 nm (V) whereas the loose ion pairs (l.i.p.) absorb at λmax}- 450 nm (I–V). In the NMR the chemical shift of the proton para with respect to the carbanionic center was examined as a function of solvent (THF, THF/HMPA, and in some cases ether or pure HMPA) and temperature (+20 to ?40°C). The para proton is shielded significantly with regard to the aromatic protons of the hydrocarbon (Δδ(H_para) ca. 1–1.7 ppm). The weakest shielding was observed in ether, in agreement with the existence of c.i.p. The largest shielding (THF/HMPA or pure HMPA) is in connection with the presence of l.i.p. where the negative charge is less localised at position 10. Moreover, in the same solvent, and at the same temperature, Δδ(H_para) was observed to increase with the substituent bulk, up to the point that there are only l.i.p. present. As found previously (namely for the fluorenyl anion) the l.i.p./c.i.p. ratio increases when temperature decreases. The results of this structural study allow to rationalize the protonation stereochemistry of 9-alkyl-10-lithio-9,10-dihydroanthracenes in the above-mentioned solvents.     

Computational study of the aminolysis of esters. The reaction of methylformate with ammonia

The aminolysis of esters is a basic organic reaction considered as a model for the interaction of carbonyl group with nucleophiles. In the present computational study the different possible mechanistic pathways of the reaction are reinvestigated by applying higher level electronic structure theory, examining the general base catalysis by the nucleophile, and a more comprehensive study the solvent effect. Both the ab initio QCISD/6-31(d,p) method and density functional theory at the B3LYP/6-31G(d) level were employed to calculate the reaction pathways for the simplest model aminolysis reaction between methylformate and ammonia. Solvent effects were assessed by the PCM method. The results show that in the case of noncatalyzed aminolysis the addition/elimination stepwise mechanism involving two transition states and the concerted mechanism have very similar activation energies. However, in the case of catalyzed aminolysis by a second ammonia molecule the stepwise mechanism has a distinctly lower activation energy. All transition states in the catalyzed aminolysis are 10-17 kcal/mol lower than those for the uncatalyzed process.     

Cyclic perfluorocarbon radicals and anions having high global warming potentials (GWPs): structures, electron affinities, and vibrational frequencies

Adiabatic electron affinities, optimized molecular geometries, and IR-active vibrational frequencies have been predicted for small cyclic hydrocarbon radicals C(n)H(2)(n)(-)(1) (n = 3-6) and their perfluoro counterparts C(n)F(2)(n)(-)(1) (n = 3-6). Total energies and optimized geometries of the radicals and corresponding anions have been obtained using carefully calibrated (Chem. Rev. 2002, 102, 231) density functional methods, namely, the B3LYP, BLYP, and BP86 functionals in conjunction with the DZP++ basis set. The predicted electron affinities show that only the cyclopropyl radical tends to bind electrons among the hydrocarbon radicals studied. The trend for the perfluorocarbon (PFC) radicals is quite different. The electron affinities increase with expanding ring size until n = 5 and then slightly decrease at n = 6. Predicted electron affinities of the hydrocarbon radicals using the B3LYP hybrid functional are 0.24 eV (C(3)H(5)/C(3)H(5)(-)), -0.19 eV (C(4)H(7)/C(4)H(7)(-)), -0.15 eV (C(5)H(9)/C(5)H(9)(-)), and -0.11 eV (C(6)H(11)/C(6)H(11)(-)). Analogous electron affinities of the perflurocarbon radicals are 2.81 eV (C(3)F(5)/C(3)F(5)(-)), 3.18 eV (C(4)F(7)/C(4)F(7)(-)), 3.34 eV (C(5)F(9)/C(5)F(9)(-)), and 3.21 eV (C(6)F(11)/C(6)F(11)(-)).     

Hypervalency avoided: simple substituted BrF3 and BrF5 molecules. Structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF2 and HBrF4

Five different pure density functional theory (DFT) and hybrid Hartree-Fock/DFT methods have been used to search for the molecular structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF(n)/HBrF(n)(-) (n = 2, 4). The basis sets used in this work are of double-zeta plus polarization quality in conjunction with s- and p-type diffuse functions, labeled as DZP++. Structures with Br-F and Br-H normal bonds, that is, HBrF(2)/HBrF(2)(-) with C(2v) or C(s) symmetry and HBrF(4)/HBrF(4)(-) with C(4v) or C(s) symmetry, are genuine minima. However, unlike the original BrF(3) and BrF(5) molecules, the global minima for HBrF(n)/HBrF(n)(-) (n = 2, 4) species are predicted to be complexes, some of which contain hydrogen bonds. The demise of the hypervalent structures is due to the availability of favorable dissociation products involving HF, which has a much larger dissociation energy than F(2). Similar reasoning suggests that PF(4)H, SF(3)H, SF(5)H, ClF(2)H, ClF(4)H, AsF(4)H, SeF(3)H, and SeF(5)H will all be hydrogen bond structures incorporating diatomic HF. The most reasonable theoretical values of the adiabatic electron affinities (EA(ad)) are 3.69 (HBrF(2)) and 4.38 eV (HBrF(4)) with the BHLYP method. These electron affinities are comparable to those of the analogous molecules: Br(2)F(n), ClBrF(n), and BrF(n)(+1) systems. The first F-atom dissociation energies for the neutral global minima are 60 (HBrF(2)) and 49 kcal/mol (HBrF(4)) with the B3LYP method. The first H-atom dissociation energies for the same systems are 109 (HBrF(2)) and 116 kcal/mol (HBrF(4)). The large Br-H bond energies are not sufficient to render the hypervalent structures energetically tenable. The dissociation energies for the complexes to their fragments are relatively small.     

Dosage de traces de fer total dans les vins

Résumé Le dosage électrophotocolorimétrique des traces de fer total dans les vins au moyen de l'orthophénanthroline a été peu étudié jusqu'à présent. Sous un titre général le mémoire expose les conclusions auxquelles ont abouti diverses recherches consacrées à l'étude du dosage en question. L'application raisonnée de la méthode deBencze a permis d'établir une technique d'évaluation photocolorimétrique du fer dans les vins et les jus de fruits. Intéressante par sa simplicité et sa rapidité d'exécution, la technique en question indique le moyen de doser cet élément directement dans les liquides obtenus à partir des vins, suivant le procédé du traitement oxydatif au perhydrol. Ce traitement a permis de revaloriser le dosage du fer au point de vue de la rapidité par rapport à la minéralisation sèche, sans apporter en même temps des complications dans les manipulations analytiques et sans affecter la sensibilité et la précision de la réaction colorimétrique.

---

Summary There has been little study of the electrophotocolorometric determination of the total iron content of wines by means of orthophenanthroline. Under a general title, the paper gives the general conclusions reached as a result of various studies of this determination. An intelligent application of theBencze method has resulted in a photocolorimetric evaluation of iron in wines and fruit juices. Characterized by simplicity and rapidity, this technique provides a means of determining this element directly in the liquids obtained from wines after oxidative treatment with perhydrol. This procedure compares, favorably with respect to speed with mineralization by the dry method, but is free from the complications in the analytical manipulations and there is no adverse effect on the sensitivity and the precision of the colorimetric reaction.

---

Zusammenfassung Die elektrokolorimetrische Bestimmung der geringen Gesamtmengen an Eisen in Wein mit Hilfe von o-Phenanthrolin wurde bisher nur wenig untersucht. Die beim Studium dieses Verfahrens gesammelten Erfahrungen werden in Form eines allgemeinen Überblicks mitgeteilt. Die Anwendung der Methode vonBencze führte zur Ausarbeitung einer Arbeitsvorschrift zur kolorimetrischen Bestimmung des Eisens in Wein und Fruchtsäften. Diese ist wegen der Einfachheit und Geschwindigkeit ihrer Durchführung von praktischem Interesse. In der durch Oxydation des Weines mit Wasserstoffperoxyd erhaltenen Lösung kann das Eisen unmittelbar bestimmt werden. Diese Art des Aufschlusses ist besser geeignet als die trockene Veraschung, ohne die Empfindlichkeit oder die Genauigkeit der Farbreaktion zu beeinträchtigen.