Characterization of the carrot defect in 4H-SiC epitaxial layers

Characterization of the epitaxial defect known as the carrot defect was performed in thick 4H-SiC epilayers. A large number of carrot defects have been studied using different experimental techniques such as Nomarski optical microscopy, KOH etching, cathodoluminescence and synchrotron white beam X-ray topography. This has revealed that carrot defects appear in many different shapes and structures in the epilayers. Our results support the previous assignment of the carrot defect as related to a prismatic stacking fault. However, we have observed carrot defects with and without a visible threading dislocation related etch pit in the head region, after KOH etching. Polishing of epilayers in a few μm steps in combination with etching in molten KOH and imaging using Nomarski optical microscope has been used to find the geometry and origin of the carrot defects in different epilayers. The defects were found to originate both at the epi-substrate interface and during the epitaxial growth. Different sources of the carrot defect have been observed at the epi-substrate interface, which result in different structures and surfaces appearance of the defect in the epilayer. Furthermore, termination of the carrot defect inside the epilayer and the influence of substrate surface damage and growth conditions on the density of carrot defects are studied.     

The mass spectra of small-ring hetero-cycles—II. Aziridinones (α-lactams)

The mass spectra of six aziridinones (α-lactams) are presented. The six aziridinones exhibit the same general fragmentation pattern, the primary processes being loss of the N-t-butyl group, loss of carbon monoxide and loss of t-butyl isocyanate. Several additional rearrangement or fragmentation processes are observed with specific α-lactams.     

Morphology of actinide-rich particles released from the BOMARC accident and collected from soil post remediation

The physical, chemical, and radiological characteristics of material released to the environment from accidents involving nuclear weapon components are dependent upon many factors, especially the manner in which the material is released and delivered to the environment. These characteristics will also be influenced by physical and chemical effects associated with weathering if the material remains exposed to the environment for a long period of time. This study evaluates the morphological characteristics of particles released to the environment as a result of the 1960 BOMARC incident and compares these characteristics to those described following similar incidents at Thule, Greenland (1968) and Palomares, Spain (1966). Each of these incidents involved unique circumstances and conditions that distributed actinide-rich particles to the environment with a range of distinctive morphological characteristics. Morphological and surface elemental analyses were conducted on a set of discrete particles isolated from samples of post-remediated soil collected at McGuire Air Force Base, the site of the BOMARC incident. Scanning electron microscopy and complimentary energy dispersive X-ray spectroscopy were used to perform the analyses. Non-destructive analysis of uranium and plutonium contained in each particle was measured using high-resolution gamma spectrometry. Unique characteristics of the BOMARC samples include some particles exhibiting a smooth, crystalline texture and varying elemental surface distribution of uranium and plutonium, dependent on the particle’s morphology.     

A Quantum Chemical Study of the Abnormal Reactivity of 2‐Methoxyfuran

The gas‐phase pyrolytic and oxidative chemistry of furans has received much attention recently because of their potential as platform chemicals and biofuels. Typically these compounds exhibit very strong ring carbon to H or CH₃ bonds. 2‐Methoxyfuran had been reported to be exceptionally unstable in comparison to related substituted heterocycles in pyrolytic experiments. The origins of its reactivity are shown to be due to the very weak O–CH₃, which at 189.5 ± 1.9 kJ mol^?1 is some 200 kJ mol^?1 weaker than C–H bonds in the molecule. We show that the reported reactivity is somewhat overestimated but that does not alter the fact that 2‐methoxyfuran is exceptionally unstable. It may prove to be a useful alternative to azomethane as a thermal source of methyl radicals.     

Coordination Chemistry of Lipoic Acid and Related Compounds V [1]. New Heteroditopic Ligands Derived from Monoazacrown Ethers and Lipoic Acid

Summary.  Lipoyl imidazolide reacts with aza-15-crown-5 (1,4,7,10-tetraoxa-13-azacyclopentadecane) or aza-18-crown-6 (1,4,7,10,13-pentaoxa-16-azacyclooctadecane) to afford new N-lipoylated azacrown compounds in good yields. These compounds can be transformed into 1,3-dithiols and amines by reduction with complex hydrides of the disulfide and/or amide group of the lipoyl chain. The new pendant-arm macrocycles react as heteroditopic ligands by forming dithiolate and disulfide complexes with the ‘soft’ metal ions Ni²⁺ and Pd²⁺, respectively, and an amine complex with the ‘hard’ Li⁺ ion. Semiempirical and DFT calculations on the complexation of a lithium ion give a most favourable structure in which the azacrown and two solvent molecules are in contact with the metal but not the pendant arm. Received January 29, 2002; accepted (revised) March 25, 2002     

Acid digestion of geological and environmental samples using open-vessel focused microwave digestion

The application of open vessel focused microwave acid digestion is described for the preparation of geological and environmental samples for analysis using inductively coupled plasma-mass spectrometry (ICP-MS). The method is compared to conventional closed-vessel high pressure methods which are limited in the use of HF to break down silicates. Open-vessel acid digestion more conveniently enables the use of HF to remove Si from geological and plant samples as volatile SiF4, as well as evaporation-to-dryness and sequential acid addition during the procedure. Rock reference materials (G-2 granite, MRG-1 gabbros, SY-2 syenite, JA-1 andesite, and JB-2 and SRM-688 basalts) and plant reference materials (BCR and IAEA lichens, peach leaves, apple leaves, Durham wheat flour, and pine needles) were digested with results comparable to conventional hotplate digestion. The microwave digestion method gave poor results for granitic samples containing refractory minerals, however fusion was the preferred method of preparation for these samples. Sample preparation time was reduced from several days, using conventional hotplate digestion method, to one hour per sample using our microwave method.     

Direct detection of renal function markers using microchip CE with pulsed electrochemical detection

Creatinine, creatine, and uric acid are three important compounds that are measured in a variety of clinical assays, most notably for renal function. Traditional clinical assays for these compounds have focused on the use of enzymes or chemical reactions. Electrophoretic microchips have the potential to integrate separation power of capillary electrophoresis with devices that are small, portable, and have the speed of conventional sensors. The development of a microchip CE system for the direct detection of creatinine, creatine, and uric acid is presented. The device uses pulsed amperometric detection (PAD) to detect the nitrogen-containing compounds as well as the easily oxidizable uric acid. Baseline separation of creatinine, creatine and uric acid was achieved using 30 mM borate buffer (pH = 9.4) in less than 200 s. Linear calibration curves were obtained with limits of detection of 80 microM, 250 microM and 270 microM for creatinine, creatine and uric acid respectively. An optimization of the separation conditions and a comparison of PAD with other amperometric detection modes is also shown. Finally, analysis of a real urine sample is presented with validation of creatinine concentrations using a clinical assay kit based on the Jaffé reaction.     

The diazocarbene (CNN) molecule: characterization of the X 3Sigma- and A 3Pi electronic states

The ground (X (3)Sigma(-)) and first excited triplet (A (3)Pi) electronic states of diazocarbene (CNN) have been investigated systematically starting from the self-consistent-field theory and proceeding to the coupled cluster with single, double, and full triple excitations (CCSDT) method with a wide range of basis sets. While the linear X (3)Sigma(-) ground state of CNN has a real degenerate bending vibrational frequency, the A (3)Pi state of CNN is subject to the Renner-Teller effect and presents two distinct real vibrational frequencies along the bending coordinate. The bending vibrational frequencies of the A (3)Pi state were evaluated via the equation-of-motion coupled cluster (EOM-CC) techniques. The significant sensitivity to level of theory in predicting the ground-state geometry, harmonic vibrational frequencies, and associated infrared intensities has been attributed to the fact that the reference wave function is strongly perturbed by the excitations of 1pi-->3pi followed by a spin flip. At the highest level of theory with the largest basis set, correlation-consistent polarized valence quadruple zeta (cc-pVQZ) CCSDT, the classical X-A splitting (T(e) value) was predicted to be 68.5 kcal/mol (2.97 eV, 24 000 cm(-1)) and the quantum mechanical splitting (T(0) value) to be 69.7 kcal/mol (3.02 eV, 24 400 cm(-1)), which are in excellent agreement with the experimental T(0) values, 67.5-68.2 kcal/mol (2.93-2.96 eV, 23 600-23 900 cm(-1)). With the EOM-CCSD method the Renner parameter (epsilon) and averaged bending vibrational frequency (omega(2)) for the A (3)Pi state were evaluated to be epsilon=-0.118 and omega(2)=615 cm(-1), respectively. They are in fair agreement with the experimental values of epsilon=-0.07 and nu(2)=525 cm(-1).