Quantitative Modelization of Hydrogen-Bonding in Polyoxometalate Chemistry

The PACHA (Partial Atomic Charges and Hardnesses Analysis) formalism is applied to polyoxometalate chemistry. Using the Ca₂(H₃O)₂[V₁₀O₂₈]16H₂O crystal structure, it was shown that the relative affinity for protons of the various oxygen sites may be quantitatively determined. The charge distribution was also found to be in good agreement with ¹⁷O and ⁵¹V NMR measurements. The H-bond energy in this kind of compound was found to be about –17 kJmol^–1, i.e., about 20% lower than in hexagonal ice. Finally, the 57 H-atom coordinates characterizing this structure were successfully recovered from a crystal structure optimization in the solid-state through electrostatic balance minimization. The importance of considering neutral clusters for a good modelization was demonstrated not only in the case of the decavanadate structure, but also in polysilicate chemistry. For the first time a clear picture emerges explaining the widespread occurrence of four- and five-membered rings in zeolite and silicate chemistry. The possibility of forming much larger polyanions with transition metal cations, is well explained using the crystal structure of the superfullerene keplerate [Mo₁₃₂O₃₇₂(HCO₂)₃₀(H₂O)₇₂]^42– as a benchmark compound. The possibility of performing an ab-initio retrosynthetic analysis of this cage is demonstrated.     

硅表面嫁接有机单分子膜的研究近况

由于在微电子、化学 /生物化学传感器、纳米技术及太阳能等领域具有潜在的应用价值 ,通过 Si— C键在硅表面上直接嫁接有机单分子膜 ,已成为近几年新开展的研究热点 .对这一研究领域进行了概要综述     

Electrophoretic separations in poly(dimethylsiloxane) microchips using mixtures of ionic,nonionic and zwitterionic surfactants

The use of surfactant mixtures to affect both EOF and separation selectivity in electrophoresis with PDMS substrates is reported, and capacitively coupled contactless conductivity detection is introduced for EOF measurement on PDMS microchips. First, the EOF was measured for two nonionic surfactants (Tween 20 and Triton X‐100), mixed ionic/nonionic surfactant systems (SDS/Tween 20 and SDS/Triton X‐100), and finally for the first time, mixed zwitterionic/nonionic surfactant systems (TDAPS/Tween 20 and TDAPS/Triton X‐100). EOF for the nonionic surfactants decreased with increasing surfactant concentration. The addition of SDS or TDAPS to a nonionic surfactant increased EOF. After establishing the EOF behavior, the separation of model catecholamines was explored to show the impact on separations. Similar analyte resolution with greater peak heights was achieved with mixed surfactant systems containing Tween 20 and TDAPS relative to the single surfactant system. Finally, the detection of catecholamine release from PC12 cells by stimulation with 80 mM K⁺ was performed to demonstrate the usefulness of mixed surfactant systems to provide resolution of biological compounds in complex samples.     

Development of a stabilized low temperature infrared absorption cell for use in low temperature and collisional cooling experiments

We have constructed a stabilized low temperature infrared absorption cell cooled by an open cycle refrigerator, which can run with liquid nitrogen from 250 to 80K or with liquid helium from 80K to a few kelvin. Several CO infrared spectra were recorded at low temperature using a tunable diode laser spectrometer. These spectra were analyzed taking into account the detailed effects of collisions on the line profile when the pressure increases. We also recorded spectra at very low pressure to accurately model the diode laser emission. Spectra of the R(2) line in the fundamental band of 13CO cooled by collisions with helium buffer gas at 10.5K and at pressures near 1 Torr have been recorded. The He-pressure broadening parameter (gamma(0) = 0.3 cm(-1) atm(-1)) has been derived from the simultaneous analysis of four spectra at different pressures.     

Morphology of actinide-rich particles released from the BOMARC accident and collected from soil post remediation

The physical, chemical, and radiological characteristics of material released to the environment from accidents involving nuclear weapon components are dependent upon many factors, especially the manner in which the material is released and delivered to the environment. These characteristics will also be influenced by physical and chemical effects associated with weathering if the material remains exposed to the environment for a long period of time. This study evaluates the morphological characteristics of particles released to the environment as a result of the 1960 BOMARC incident and compares these characteristics to those described following similar incidents at Thule, Greenland (1968) and Palomares, Spain (1966). Each of these incidents involved unique circumstances and conditions that distributed actinide-rich particles to the environment with a range of distinctive morphological characteristics. Morphological and surface elemental analyses were conducted on a set of discrete particles isolated from samples of post-remediated soil collected at McGuire Air Force Base, the site of the BOMARC incident. Scanning electron microscopy and complimentary energy dispersive X-ray spectroscopy were used to perform the analyses. Non-destructive analysis of uranium and plutonium contained in each particle was measured using high-resolution gamma spectrometry. Unique characteristics of the BOMARC samples include some particles exhibiting a smooth, crystalline texture and varying elemental surface distribution of uranium and plutonium, dependent on the particle’s morphology.     

Analysis of natural flavonoids by microchip-micellar electrokinetic chromatography with pulsed amperometric detection

Catechins (catechin and other derivatives) are naturally occurring flavonoids present in a number of plants and foods. They are also part of numerous nutraceutical formulations because they are believed to have antioxidant, cancer chemo-preventative, anti-inflammatory and antimicrobial properties. The determination of catechins has traditionally been performed by HPLC. However, this methodology is both time and sample intensive and generates large amounts of organic solvent waste. In the current report, an application of MEKC using a PDMS microchip is presented for the analysis of catechins. The system uses pulsed amperometric detection for direct analysis of important naturally occurring catechins. The effect of pH, surfactant concentration, detection potential and signal stability were analyzed. Linear relationships were found between the concentration and peak current, with good stability and limits of detection of 8 [micro sign]M for catechin, epigallocatechin gallate and epicatechin, and 14 [micro sign]M for epicatechin gallate. Optimum conditions were applied to the detection of selected catechins in a commercially available green tea extract nutraceutical and the results were compared to HPLC analysis. The analysis using microchip micellar electrokinetic chromatography and pulsed amperometric detection was completed in 4.5 min, 10 times faster than the HPLC analysis.     

Application of a rapid screening method to detect irradiated meat in Brazil

Based on the enormous potential for food irradiation in Brazil, and to ensure free consumer choice, there is a need to find a convenient and rapid method for detection of irradiated food. Since treatment with ionising radiation causes DNA fragmentation, the analysis of DNA damage might be promising. In this paper, the DNA Comet Assay was used to identify exotic meat (boar, jacaré and capybara), irradiated with ⁶⁰Co gamma rays. The applied radiation doses were 0, 1.5, 3.0 and 4.5 kGy. Analysis of the DNA migration enabled a rapid identification of the radiation treatment.     

Total Synthesis of Plakortone B

Plakortone B is a naturally occurring bicyclic[3.3.0]furanolactone compound with attractive bioactivities. Although the relative configuration of plakortone B’s central core had been established by NMR spectroscopic methods, the absolute configuration of its four stereocenters remained unknown. In the present paper, all four possible isomers of plakortone B were synthesized and one of these molecules was found to be identical with the natural plakortone B on the basis of ¹H, ¹³C NMR spectra and specific rotation comparisons. Thus, the absolute configuration of the natural plakortone B was determined to be (3S,4S,6R,10R).     

Compound‐specific bromine isotope analysis of brominated diphenyl ethers using gas chromatography multiple collector/inductively coupled plasma mass spectrometry

The bromine isotope composition is potentially diagnostic in both degradation monitoring and source apportionment of organobromines in the environment. A method for compound‐specific bromine isotope analysis (δ⁸¹Br) based on gas chromatography multiple collector inductively coupled plasma mass spectrometry (GC/ICPMS) was developed for common brominated diaromatic compounds. Brominated diphenyl ethers (BDEs) in Bromkal 70‐5DE, a technical flame‐retardant mixture containing mainly BDEs #47, #99 and #100, were used as test substances, with standard bracketing for the samples achieved through co‐injected monobromobenzene (MBB) with a known δ⁸¹Br of ?0.39‰ vs. Standard Mean Ocean Bromine (SMOBr). Three different heated transfer lines were constructed and tested to achieve efficient conduction of the BDEs from the gas chromatograph to the ICPMS instrument. The MBB was analyzed with a precision of 0.4‰ (1 s, n = 18). The precision for BDEs was 1.4–1.8‰ (1 s, n = 10–12 depending on the congener). The lower precision for the BDEs than for MBB may reflect the heat required to prevent condensation of the analytes in ICP torch assembly. The use of an internal standard of similar chemical structure to the analytes alleviates this problem, as illustrated by a difference of 0.3 ± 0.7‰ (1 s, n = 6) between the δ⁸¹Br values of co‐injected methoxy BDE‐47 and BDE‐47 extracted from whale blubber. Improvements in precision and accuracy may be achieved by the use of a more efficient heating of the torch assembly in conjunction with a set of internal standards that match the target compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Directed immobilization of reduced antibody fragments onto a novel SAM on gold for myoglobin impedance immunosensing

The successful construction of an immunosensor depends on having an effective procedure for immobilising the bio-recognition element to the transducer surface. In the present study, an amino-terminated 4-aminothiophenol (ATP) self-assembled monolayer (SAM) was modified with heterobifunctional crosslinker sulfosuccinimidyl 4-[N-maleimidomethyl] cyclohexane-1-carboxylate to couple reduced anti-myoglobin half-antibody fragments. The disulphide groups present in the hinge region of IgG molecules were selectively cleaved by 2-mercaptoethylamine to produce reduced half-antibody fragments with free sulphydryl groups. The maleimide terminated 4-ATP SAM modified surface was coupled to these reduced antibody fragments to produce highly oriented immobilization of the half-antibody via its Fc domain and to allow free access to the Fv bindings sites. This represents an improvement by comparison with biotin/avidin mediated IgG attachment which is essentially randomly oriented. Functional immunosensors were able to detect myoglobin in both phosphate buffered saline and whole serum over the range of concentrations from 10(-13)M to 10(-6)M, and order of magnitude better than avidin/biotin linked immunosensors. In addition, atomic force microscopy (AFM) was carried out to elucidate the nanotopology of the immunosensor surface at different stages of fabrication; the images demonstrate that half antibodies bind as described and show structural changes on subsequent antigen binding.