Calculated electronic transitions in sulfuric acid and implications for its photodissociation in the atmosphere

We have calculated electronic transitions for sulfuric acid in the ultraviolet region using a hierarchy of coupled cluster response functions and correlation consistent basis sets. Our calculations indicate that the lowest energy singlet transition occurs at 8.42 eV with an oscillator strength of 0.01. The lowest energy triplet state occurs at 8.24 eV. Thus, the cross section of sulfuric acid in the actinic region is likely to be very small and smaller than the upper limit put on this cross section by previous experimental investigations. We estimate the cross section of sulfuric acid in the atmospherically relevant Lyman-alpha region ( approximately 10.2 eV) to be approximately 6 x 10 (-17) cm (2) molecule (-1), a value approximately 30 times larger than the speculative value used in previous atmospheric simulations. We have calculated the J values for photodissociation of sulfuric acid with absorption of visible, UV, and Lyman-alpha radiation, at altitudes between 30 and 100 km. We find that the dominant photodissociation mechanism of sulfuric acid below 70 km is absorption in the visible region by OH stretching overtone transitions, whereas above 70 km, absorption of Lyman-alpha radiation by high energy Rydberg excited states is the favored mechanism. The low lying electronic transitions of sulfuric acid in the UV region do not contribute significantly to its dissociation at any altitude.     

Substituent effects on the basicity of 3,7-diazabicyclo[3.3.1]nonanes

Basicity constants for a series of 3,7-diazabicyclo[3.3.1]nonane derivatives in acetonitrile with a variation over 13 orders of magnitude have been determined using a spectrophotometric titration technique. An excellent correlation between basicity and calculated proton affinities obtained at PCM-B3LYP/6-31+G(d)//B3LYP/6-31G(d) level was found. The results are discussed in terms of substituent effects and compared to (15)N NMR chemical shifts.     

Sugar-assisted kinetic resolution of amino acids and amplification of enantiomeric excess of organic molecules

The origins of biological homochirality have intrigued researchers since Pasteur's discovery of the optical activity of biomolecules. Herein, we propose and demonstrate a novel alternative for the evolution of homochirality that is not based on autocatalysis and forges a direct relationship between the chirality of sugars and amino acids. This process provides a mechanism in which a racemic mixture of an amino acid can catalyze the formation of an optically active organic molecule in the presence of a sugar product of low enantiomeric excess.     

Vibrational overtone spectroscopy of three-membered rings

We have recorded vapor-phase photoacoustic spectra of cyclopropane, ethylene oxide, and ethylene sulfide in the third, fourth, and fifth CH-stretching overtone regions. We have used a harmonically coupled anharmonic oscillator local mode model to facilitate analysis of the spectra. Fermi resonance between the CH-stretching and HCH-bending vibrations is essential to explain the observed wide and multistructured CH-stretching overtone bands. A number of weak combination bands can account for the remaining experimental features observed to the blue of the CH-stretching regions. We have reassigned the fundamental spectra of these three-membered rings.     

Electronic spectroscopy of C2 in solid rare gas matrixes

Electronic spectroscopy of the C(2) molecule is investigated in Ar, Kr, and Xe matrixes in the 150-500 nm range. In the Ar matrix, the D ((1)Sigma(u)(+)) <-- ((1)Sigma(g)(+)) Mulliken band near 240 nm is the sole absorption in the UV range, whereas in the Kr matrix additional bands in the 188-209 nm range are assigned to the Kr(n)()(+)C(2)(-) <-- Kr(n)()C(2) charge-transfer absorptions. Because of the formation of a bound C(2)Xe species, the spectral observations in the Xe matrix differ dramatically from the lighter rare gases: the Mulliken band is absent and new bands appear near 300 and 423 nm. The latter is assigned to the forbidden B'((1)Sigma(g)(+)) <-- X ((1)Sigma(g)(+)) transition, but the origin of the former remains unclear. The spectral assignments are aided by electronic structure calculations at the MCSCF, CCSD(T), and BCCD(T) levels of theory and correlation consistent basis sets. A significant presence of multireference character of the C(2)Xe system was noted and a linear ground-state structure is predicted. The computational results contradict previous density functional studies on the same system.     

Effect of OH internal torsion on the OH-stretching spectrum of cis,cis-HOONO

We show that a simple two-dimensional vibrational model can explain most of the features observed in the first and second OH-stretching overtone region of the room temperature cis,cis-HOONO spectrum. The model uses ab initio calculated parameters and includes the OH-stretching mode coupled to the internal torsion of the OH group.     

Chemically-assisted fragmentation combined with multi-dimensional liquid chromatography and matrix-assisted laser desorption/ionization post source decay, matrix-assisted laser desorption/ionization tandem time-of flight or matrix-assisted laser desorption/ionization tandem mass spectrometry for improved sequencing of tryptic peptides

Derivatization of tryptic peptides using an Ettan CAF matrix-assisted laser desorption/ionization (MALDI) sequencing kit in combination with MALDI-post source decay (PSD) is a fast, accurate and convenient way to obtain de novo or confirmative peptide sequencing data. CAF (chemically assisted fragmentation) is based on solid-phase derivatization using a new class of water stable sulfonation agents, which strongly improves PSD analysis and simplifies the interpretation of acquired spectra. The derivatization is performed on solid supports, ZipTip(microC18, limiting the maximum peptide amount to 5 microg. By performing the derivatization in solution enabled the labeling of tryptic peptides derived from 100 microg of protein. To increase the number of peptides that could be sequenced, derivatized peptides were purified using multidimensional liquid chromatography (MDLC) prior to MALDI sequencing. Following the first dimension strong cation exchange (SCX) chromatography step, modified peptides were separated using reversed-phase chromatography (RPC). During the SCX clean up step, positively charged peptides are retained on the column while properly CAF-derivatized peptides (uncharged) are not. A moderately complex tryptic digest, prepared from six different proteins of equimolar amounts, was CAF-derivatized and purified by MDLC. Fractions from the second dimension nano RPC step were automatically sampled and on-line dispensed to MALDI sample plates and analyzed using MALDI mass spectrometry fragmentation techniques. All proteins in the derivatized protein mixture digest were readily identified using MALDI-PSD or MALDI tandem mass spectrometry (MS/MS). More than 40 peptides were unambiguously sequenced, representing a seven-fold increase in the number of sequenced peptides in comparison to when the CAF-derivatized protein mix digest was analyzed directly (no MDLC-separation) using MALDI-PSD. In conclusion, MDLC purification of CAF-derivatized peptides significantly increases the success rate for de novo and confirmative sequencing using various MALDI fragmentation techniques. This new approach is not only applicable to single protein digests but also to more complex digests and could, thus, be an alternative to electrospray ionization MS/MS for peptide sequencing.     

Nonadiabatic alignment of asymmetric top molecules: rotational revivals

The rotational revival structure of asymmetric top molecules, following irradiation by an intense picosecond laser pulse, is explored theoretically and experimentally. Numerically we solve nonperturbatively for the rotational dynamics of a general asymmetric top subject to a linearly polarized intense pulse, and analyze the dependence of the dynamical alignment on the field and system parameters. Experimentally we use time-resolved photofragment imaging to measure the alignment of two molecules with different asymmetry, iodobenzene, and iodopentafluorobenzene. Our numerical results explain the experimental observations and generalize them to other molecules. The rotational revival structure of asymmetric tops differs qualitatively from the intensively studied linear top case. Potentially it provides valuable structural information about molecules.     

Microporous Molecular Materials from Dipeptides Containing Non‐proteinogenic Residues

Dipeptides with two hydrophobic side chains have proved to be an exceptional source of microporous organic materials, but since previous structures were limited to the incorporation of only proteinogenic residues, their full potential as adsorbents has remained unexplored. Single‐crystal XRD data for ten new compounds with non‐proteinogenic L ‐2‐aminobutanoic acid and/or L ‐2‐amino‐pentanoic acid are presented. The gas‐phase accessibility of their crystal pores, with cross‐sections of 2.3 to 5.1 Å, was monitored by CO₂ and CH₄ adsorption isotherms. Included CO₂ was also detected spectroscopically by 2D MAS NMR. An extensive conformational analysis reveals that the use of linear rather than branched side chains (such as L ‐valine and L ‐isoleucine) affords peptides with a greater degree of conformational freedom and yields more‐flexible channel surfaces that may easily adapt to a series of potential guest molecules.     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415