Near polygons and Fischer spaces

In this paper we exploit the relations between near polygons with lines of size 3 and Fischer spaces to classify near hexagons with quads and with lines of size three. We also construct some infinite families of near polygons.To Hans Cuypers and Ivonne Falarz on the occasion of their marriage     

The structure of near polygons with quads

We develop a structure theory for near polygons with quads. Main results are the existence of sub 2j-gons for 2?j?d and the nonexistence of regular sporadic 2d-gons for d?4 with s>1 and t ₂>1 and t ₃≠t ₂(t ₂+1).     

Nearaffine planes

In this paper we develop a theory for nearaffine planes analogous to the theory of ordinary affine translation planes. In a subsequent paper we shall use this theory to give a characterization of a certain class of Minkowski planes.     

Interaction forces between salivary proteins and Streptococcus mutans with and without antigen I/II

The antigen I/II family of surface proteins is expressed by oral streptococci, including Streptococcus mutans, and mediates specific binding to, among others, salivary films. The aim of this study was to investigate the interaction forces between salivary proteins and S. mutans with (LT11) and without (IB03987) antigen I/II through atomic force microscopy (AFM) and to relate these interaction forces with the adhesion of the strains to saliva-coated glass in a parallel plate flow chamber. Upon approach of the bacteria toward a saliva-coated AFM tip, both strains experienced a similar repulsive force that was significantly smaller at pH 6.8 (median 3.0 and 3.1 nN for LT11 and IB03987, respectively) than at pH 5.8 (median 4.6 and 4.7 nN). The decay length of these repulsive forces was between 19 and 37 nm. Upon retraction at pH 6.8, the combined specific and nonspecific adhesion forces were significantly stronger for the parent strain LT11 (median -0.4 nN) than for the mutant strain IB03987 (median 0.0 nN), whereas at pH 5.8 the median of the adhesion forces measured was 0.0 nN for both strains. Moreover, at pH 6.8, the parent strain LT11 adhered in significantly higher numbers (9.6 x 106 cm-2) to a salivary coating than the mutant strain IB03987 (2.5 x 106 cm-2). Similar to the difference in adhesion forces between both strains at pH 5.8, the difference in adhesion between both strains also disappeared at pH 5.8, which suggests the involvement of attractive electrostatic forces in the interaction between antigen I/II and salivary coatings. In summary, this study shows that antigen I/II at the surface of S. mutans LT11 is responsible for its increased adhesion to salivary coatings under flow through an additional attractive electrostatic force.     

Calorimetric comparison of the interactions between salivary proteins and Streptococcus mutans with and without antigen I/II

Antigen I/II can be found on streptococcal cell surfaces and is involved in their interaction with salivary proteins. In this paper, we determine the adsorption enthalpies of salivary proteins to Streptococcus mutans LT11 and S. mutans IB03987 with and without antigen I/II, respectively, using isothermal titration calorimetry. In addition, protein adsorption to the cell surfaces was determined spectrophotometrically. S. mutans LT11 with antigen I/II, yielded a much higher, exothermic adsorption enthalpy at pH 6.8 (ranging from −2073 × 10⁻⁹ to −31707 × 10⁻⁹ μJ per bacterium) when mixed with saliva than did S. mutans IB03987 (−165 × 10⁻⁹ to −1107 × 10⁻⁹ μJ per bacterium) at all bacterial concentrations studied (5 × 10⁹, 5 × 10⁸, and 5 × 10⁷ ml⁻¹), largest effects per bacterium being observed for the lowest concentration. However, the enthalpy of salivary protein adsorption to S. mutans LT11 became smaller at pH 5.8. Adsorption isotherms for the S. mutans LT11 showed considerable protein adsorption at pH 6.8 (1.2–2.1 mg/m²), that decreased only slightly at pH 5.8 (1.1–1.6 mg/m²), with the largest amount adsorbed at the lowest bacterial concentration. This suggests that the protein(s) in the saliva with the strongest affinity for antigen I/II is (are) readily depleted from saliva. In conclusion, antigen I/II surface proteins on S. mutans play a determinant role in adsorption of salivary proteins through the creation of enthalpically favorable adsorption sites.     

Role of eDNA on the adhesion forces between Streptococcus mutans and substratum surfaces: influence of ionic strength and substratum hydrophobicity

The aim of this study was to investigate the role of extracellular DNA (eDNA) on the adhesion strength of Streptococcus mutans LT11 on substrata with different hydrophobicities at high and low ionic strengths. AFM adhesion forces to a hydrophilic and hydrophobic substratum increased with increasing surface-delay times and ionic strength and were stronger on a hydrophobic than on a hydrophilic substratum. The presence of eDNA on the streptococcal cell surface enhanced its adhesion force to a hydrophobic substratum significantly more than to a hydrophilic substratum, especially after bond maturation. Bond maturation on a hydrophilic substratum was accompanied by an increasing number of minor adhesion peaks, indicating the involvement of acid-base interactions, whereas on the hydrophobic substratum surface the number of minor adhesion peaks remained low. More minor adhesion peaks developed on the hydrophilic substratum at low ionic strength than at high ionic strength. The final rupture distance in retraction force-distance curves was independent of ionic strength on a hydrophilic substratum and increased with increasing surface delay time. On the hydrophobic surface, the final rupture distance did not increase with surface delay time but was significantly smaller at low than at high ionic strength. Final rupture distances were different in presence and absence of eDNA, and the lower values of this difference coincided with the decrease in hydrodynamic radius of the streptococci upon increasing ionic strength, measured using dynamic light scattering. AFM also yielded higher values for the ionic strength induced difference in final rupture distance because in AFM rupture is forced, while in dynamic light scattering differences in radius are only induced by ionic strength differences.     

Isolation and partial characterization of a biosurfactant produced by Streptococcus thermophilus A

Isolation and characterization of the surface active components from the crude biosurfactant produced by Streptococcus thermophilus A was studied. A fraction rich in glycolipids was obtained by the fractionation of crude biosurfactant using hydrophobic interaction chromatography. Molecular (by Fourier transform infrared spectroscopy) and elemental compositions (by X-ray photoelectron spectroscopy) were determined. Critical micelle concentration achieved was 20g/l, allowing for a surface tension value of 36mJ/m(2). Moreover, this glycolipid rich fraction was found to be an anti-adhesive and antimicrobial agent against several bacterial and yeast strains isolated from explanted voice prostheses. Further purification steps should be carefully analyzed as each purification step will increase the costs and decreases the amounts of biosurfactants recovered.     

Nanoscale Chemical Imaging of the Reduction Behavior of a Single Catalyst Particle

A closer look : Investigation of the reduction properties of a single Fischer–Tropsch catalyst particle, using in situ scanning transmission X‐ray microscopy with spatial resolution of 35 nm, reveals a heterogeneous distribution of Fe⁰, Fe²⁺, and Fe³⁺ species. Regions of different reduction properties are defined and explained on the basis of local chemical interactions and catalyst morphology.

     

A Degradable Sustained-Release Drug Delivery System for Bleb-Forming Glaucoma Surgery

Fibrosis of the filtering bleb is one of the main causes of failure after bleb-forming glaucoma surgery. Intraoperative application of mitomycin C (MMC) is the current gold standard to reduce the fibrotic response. However, MMC is cytotoxic and one-time application is often insufficient. A sustained-release drug delivery system (DDS), loaded with MMC, may be less cytotoxic and equally or more effective. Two degradable (polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA)) MMC-loaded DDSs are developed. Release kinetics are first assessed in vitro followed by rabbit implants in conjunction with the PRESERFLO MicroShunt. As a control, the MicroShunt is implanted with adjunctive use of a MMC solution. Rabbits are euthanized at postoperative day (POD) 28 and 90. The PLGA and PCL DDSs release (on average) 99% and 75% of MMC, respectively. All groups show functioning blebs until POD 90. Rabbits implanted with a DDS show more inflammation with avascular thin-walled blebs when compared to the control. However, collagen is more loosely arranged. The PLGA DDS shows less inflammation, less foreign body response (FBR), and more complete degradation at POD 90 when compared to the PCL DDS. Further optimization with regard to dosage is required to reduce side effects to the conjunctiva.