Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Dark-state mechanism for the long-time transfer of excitations in a donor–acceptor system

The excitation energy transfer between a donor–acceptor pair with fixed distance apart through energy exchanging with environment is investigated. The total system is modeled as two two-level systems (TLSs) interacting with many harmonic oscillators. The pair behaves coherently or incoherently, depending on whether the dipolar coupling is stronger or weaker than the TLS–environment coupling. The environmental linear dispersion relation gives an analytical solution to the pair?s probability involving all the retardation times. We found that the long-time trapping of energy within the pair is caused by the inhibiting dark-state radiative decay when two TLSs are at half a resonant wavelength.     

Computational insight into asymmetric uranyl‐salophen coordinated with α, β‐unsaturated aldehydes and ketones

The study of the catalytic activity and activation mechanism of asymmetric uranyl‐salophens with α, β‐unsaturated aldehydes or α, β‐unsaturated ketones, is a research hotspot. In this paper, the complexes of the uranyl–salophen(U‐S) modified by unilateral benzene, coordinated with cyclohexenone, cyclopentenone and acrolein, were investigated using density functional theory calculations at the level of B3LYP/6‐311G(d, p) basis set. The results showed that the uranyl‐salophen(U‐S) weakened the large π bond between C = C and C = O of the α, β‐unsaturated aldehydes and ketones, making the unsaturated aldehydes and ketones activated. In addition, the molecular‐recognition selectivity of the asymmetrical uranyl‐salophen for cyclohexenone and cyclopentenone were much higher than for acrolein.     

A High-Efficiency Hematite Photoanode with Enhanced Bonding Energy Around Fe Atoms

Hematite nanoarrays are important photoanode materials. However, they suffer from serious problems of charge transfer and surface states; in particular, the surface states hinder the increase in photocurrent. A previous strategy to suppress the surface state is the deposition of an Fe-free metal oxide overlayer. Herein, from the viewpoint of atomic bonding energy, it is found that the strength of bonding around Fe atoms in the hematite is the key to suppressing the surface states. By treating the surface of hematite with Se and NaBH₄, the Fe₂O₃ transforms to a double-layer nanostructure. In the outer layer, the Fe−O bonding is reinforced and the Fe−Se bonding is even stronger. Therefore, the surface states are inhibited and the increase in the photocurrent density becomes much faster. Besides, the treatment constructs a nanoscale p–n junction to promote the charge transfer. Improvements are achieved in onset potential (0.25 V shift) and in photocurrent density (5.8 times). This work pinpoints the key to suppressing the surface states and preparing a high-efficiency hematite nanoarray, and deepens our understanding of hematite photoanodes.     

Stabilization of zeylenone in rat plasma by the presence of esterase inhibitors and its LC‐MS/MS assay for pharmacokinetic study

Six esterase inhibitors, namely EDTA·2Na⁺, NaF, phenylmethanesulfonyl fluoride, dichlorvos, bis‐nitrophenyl phosphate (BNPP) and thenoyltrifluoroacetone, and the mixture of NaF and BNPP, were evaluated for the stabilization of labile benzoate containing zeylenone in rat plasma. The mixture appeared to exhibit the most effectively stabilizing effect with the degraded content of zeylenone decreasing from >60% (in the absence of inhibitors) to <6%. Following the stabilization by the addition of NaF (5 mm ) and BNPP (5 mm ), the analytes in rat plasma were acidified by formic acid and extracted into ethyl acetate at 0°C. After chromatographic separation, the detection of zeylenone was performed on a 3200 Q‐Trap with positive ion electrospray mode, monitoring the ion transition m/z 383.2 → 105.0. The method was validated over the range from 2.68 to 1340 ng/mL with inter‐ and intra‐run precision for the quality control samples being less than 6.8%. The assay accuracy was within 100 ± 7.0%. The validated method was successfully applied to a pharmacokinetic study in rats after the intratracheal administration of zeylenone in free drug or polymeric micellar solutions. The results showed that the pulmonary absorption of zeylenone loaded in micelles was significantly retarded compared with that of free drug solutions. Copyright © 2012 John Wiley & Sons, Ltd.     

Defect modes tuning of one-dimensional photonic crystals with lithium niobate and silver material defect

In this paper, a novel PCs defect mode is designed by inserting a Ag/LiNbO₃/Ag sandwich structure into periodically stacked TiO₂/MgF₂ dielectric superlattice. The band gap calculation is conducted using transfer matrix method. An emergence of defect mode around 525 nm is demonstrated. By applying an external voltage on this defect mode, remarkable wavelength tuning can be achieved. At normal incidence, a tuning bandwidth up to 70 nm is obtained by moderate change of external voltage from −250 to 250 V. This feature can be employed to fabricate practical tunable filters in visible region.     

Size-dependent visible photoluminescence from ZnO nanoparticles prepared via SiO2 network

This study reports a simple method for the synthesis of different size of wurtzite ZnO nanoparticles in assistance of tetraethyl orthosilicate (TEOS). With the increase of the amount of TEOS added, the average size of ZnO nanoparticles was found decreased from ∼14.6 to ∼1.9 nm by characterization of X-ray diffraction (XRD) and high-resolution electron microscopy (HRTEM). The growth of ZnO nanoparticles is proposed to be controlled by the density of the SiO₂ chain mesh which is determined by TEOS amount in precursor. Ultraviolet–visible (UV–VIS) absorption and photoluminescence (PL) spectra show both shift to higher energy in cut-off edge and in visible emission bands respectively. The electron transition process in the mechanism of the visible emission shift was described and related to quantum size effect in ZnO nanoparticles.