Hyperbolic measures, moments and coefficients. Algebra on hyperbolic functions

With convolutions, we determine the Fourier transform of when n is a positive integer. Studying the expansion and taking the Fourier transform of when n and d are strictly positive integers, we obtain some polynomials and new probability densities related to them.     

Characterization of Tin(IV) Oxide Thin Films Prepared by Atmospheric Pressure Chemical Vapor Deposition of cis‐[SnCl4{OC(H)OC2H5}2]

A new single‐source precursor, [SnCl₄{OC(H)OC₂H₅}₂], prepared by treating tin tetrachloride with ethyl formate (1:2 ratio) was developed for the deposition of tin oxide thin films on glass substrates. The compound [SnCl₄{OC(H)OC₂H₅}₂] is highly volatile and provides very high growth rates (up to 100Å s^?1 at 560 °C) in an atmospheric pressure chemical vapor deposition (APCVD) reactor. More significantly, the compound does not decompose to tin oxide below 320 °C, thereby minimizing the formation of particles in the vapor above the growing tin oxide film. To prepare highly conducting fluorine doped tin oxide (SnO₂:F) films 2,2,2‐trifluoroethyl trifluoroacetate was used as the source of fluoride. High quality SnO₂:F films were deposited at 560 °C with a flow rate of 2 mL fluoride reagent hr^?1; typical film properties are resistivity of 5.9 X 10^?4 Ω cm, Hall mobility of 27.3 cm² V^?1 s^?1, carrier concentration of 3.9 X 10²⁰ cm^?3 and percent transmission ranging from 86 to 88 %. The best films of SnO₂:F possess transparencies as high as 90 % (750 nm), sheet resistances as low as 7 Ω sq^?1 and Haacke's figure of merit as high as 29 X 10^?3 (750 nm). The newly developed APCVD reactor and the chemistry were optimized with respect to structural, electrical and optical properties of the films by adjusting the substrate temperature, gas flow rates and the amount of fluoride present in the vapor stream. Growth rates with respect to deposition time, substrate temperature and flow rates of precursors were found to be similar for both undoped (SnO₂) and doped (SnO₂:F) samples. The SnO₂:F films possess larger grains than the SnO₂ which may account for the lower resistivity and the higher mobility in the SnO₂:F samples.     

Fast method for monitoring phospholipase A2 activity by liquid chromatography–electrospray ionization mass spectrometry

A new liquid chromatography–electrospray ionization mass spectrometry (LC–ESI-MS) method for the fast determination of phospholipase A₂ (PLA₂) activity has been developed. For the first time, the method allows the parallel detection of glycerophosphatidylcholine (GroPCho) as PLA₂ substrate as well as of its products fatty acid (FA) and lyso-GroPCho. ESI-MS was carried out in negative ion mode, detecting the FA as [M − H]⁻ ions and the lyso-GroPCho and GroPCho as acetate adducts [M + Ac]⁻. Utilizing a fast gradient on a short C₅-modified silica gel column with 3 μm particles, five GroPChos, five FAs and six lyso-GroPChos could be separated according to their chain length in less than 3 min. A very high average chromatographic efficiency of 41,200 theoretical plates (plate height 0.5 μm) was achieved for the separation of the GroPChos. The method was applied for monitoring the release of arachidonic acid (20:4 FA) and 1-stearoyl-lyso-sn-GroPCho (18:0 GroPCho) from unilamellar vesicles of 1-stearoyl-2-arachidonoyl-sn-GroPCho (18:0/20:4 GroPCho). With a limit of detection of 0.5 pmol (total amount injected on column) for the FAs and lyso-GroPChos and 1.5 pmol for the GroPChos as well as a linear range of 1.5 decades, the method has proven to be suitable for the monitoring of different secretory PLA₂ (sPLA₂) conversions. Furthermore, it was applied to screen a small library of PLA₂ inhibitors for their activity towards sPLA₂ type V and snake venom of Bothrops moojeni. In both cases, active samples could be directly identified. With its short analysis time, its high chromatographic efficiency and the parallel detection of substrate and all products, the developed LC–ESI-MS method is well suited for the analysis of PLA₂ activity.     

The Tetrafluoroborate Salt of 4-Methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate: Synthesis, Crystal Structure and DFT Calculations

Abstract  

The tetrafluoroborate salt of 4-methoxybenzyl N-2-(dimethylamino)ethyl-N-nitrosocarbamate was prepared in two steps, via the corresponding carbamate. Its crystal structure is monoclinic, space group P21/c. The unit cell dimensions are: a = 19.499(8) ?, b = 5.877(3) ?, c = 15.757(7) ?, α = 90°, β = 110.019(7)°, γ = 90°, V = 1696.5(12) ?³, Z = 4. The structure exhibits an unexpected, pseudo-gauche conformation with respect to the C2–C3 bond, due to a stabilizing hydrogen bond between the carbonyl oxygen (O1) and the hydrogen atom at the trialkylammonium center (H3n), with a distance between them of 2.37 ?. DFT calculations on the cation (B3LYP/6-31 + G(d)) confirm that the hydrogen bond stabilized gauche conformation is the global minimum structure.     

The RNase a superfamily: Generation of diversity and innate host defense

Summary The Ribonuclease A superfamily includes an extensive network of distinct and divergent gene lineages. Although all ribonucleases of this superfamily share invariant structural and catalytic elements and some degree of enzymatic activity, the primary sequences have diverged significantly, ostensibly to promote novel function. We will review the literature on the evolution and biology of the RNase A ribonuclease lineages that have been characterized specifically as involved in host defense including: (1) RNases 2 and RNases 3, also known as the eosinophil ribonucleases, which are rapidly-evolving cationic proteins released from eosinophilic leukocytes, (2) RNase 7, an anti-pathogen ribonuclease identified in human skin, and (3) RNase 5, also known as angiogenin, another rapidly-evolving ribonuclease known to promote blood vessel growth with recently-discovered antibacterial activity. Interestingly, some of the characterized anti-pathogen activities do not depend on ribonuclease activity per se. We discuss the ways in which the anti-pathogen activities characterized in vitro might translate into experimental confirmation in vivo. We will also consider the possibility that other ribonucleases, such as the dimeric bovine seminal ribonuclease and the frog oocyte ribonucleases, may have host defense functions and therapeutic value that remain to be explored. (190 words)     

CO2 Capture technologies: Current status and new directions using supported ionic liquid phase (SILP) absorbers

Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead of aqueous amine solutions overcomes the major thermodynamic issues. By applying SILP technology further advances, in terms of ease of handling and sorption dynamics, are obtained. Initial experimental studies showed that ionic liquids such as tetrahexylammonium prolinate, [N6666][Pro], provide a good candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9% CO2 in He).     

Trapping of Terminal Platinapolyynes by Copper(I) Catalyzed Click Cycloadditions; Probes of Labile Intermediates in Syntheses of Complexes with Extended sp Carbon Chains,and Crystallographic Studies

The silylated hexatriynyl complex trans-(C₆F₅)(p-tol₃P)₂Pt(C≡C)₃SiEt₃ ( PtC₆TES ) is converted in situ to PtC₆H (wet n-Bu₄N⁺ F⁻, THF) and cross coupled with the diyne H(C≡C)₂SiEt₃ ( HC₄TES ; CuCl/TMEDA, O₂) to give PtC₁₀TES (71 %). This sequence is repeated twice to afford PtC₁₄TES (65 %) and then PtC₁₈TES (27 %). An analogous series of reactions starting with PtC₈TES gives PtC₁₂TES (60 %), then PtC₁₆TES (43 %), and then PtC₂₀TES (17 %). Similar cross couplings with H(C≡C)₂Si(i-Pr)₃ ( HC₄TIPS ) give PtC₁₂TIPS (68 %), PtC₁₄TIPS (68 %), and PtC₁₆TIPS (34 %). The trialkylsilyl species (up to PtC₁₈TES ) are converted to 3+2 “click” cycloadducts or 1,4-disubstituted 1,2,3-triazoles trans-(C₆F₅)(p-tol₃P)₂Pt(C≡C)_n-1C=CHN(CH₂C₆H₅)N=N (29–92 % after workups). The most general procedure involves generating the terminal polyynes PtC _x H (wet n-Bu₄N⁺ F⁻, THF) in the presence of benzyl azide in DMF and aqueous CuSO₄/ascorbic acid. All of the preceding complexes are crystallographically characterized and the structural and spectroscopic properties analyzed as a function of chain length. Two pseudopolymorphs of PtC₂₀TES are obtained, both of which feature molecules with parallel sp carbon chains in a pairwise head/tail packing motif with extensive sp/sp van der Waals contacts.     

The Internal Bremsstrahlung following the Electron Capture decay of55Fe

The Internal Bremsstrahlung Electron Capture spectrum from⁵⁵Fe was measured with a HPGe detector. The total spectrum was unfolded taking into account the secondary detection effects and agrees with Glauber and Martin calculations. The measured intensity relative to K capture in the range 35 to 231 keV is 3.24(6)·10^?5 while the calculated one is 3.20·10^?5. TheQ value for the electron capture was deduced as 230.7(19) keV.