Polystyrene latex particles coated with crosslinked poly(N-isopropylacrylamide)

Thermoresponsive colloidal particles were prepared by seeded precipitation polymerization of N-isopropylacrylamide (NIPAM) in the presence of a crosslinking monomer, N,N-methylenebisacrylamide (MBA), using polystyrene latex particles (ca. 50 nm in diameter) as seeds in aqueous dispersion. Phase transitions of the prepared poly(N-isopropylacrylamide), PNIPAM, shells on polystyrene cores were studied in comparison to colloidal PNIPAM microgel particles, in H₂O and/or in D₂O by dynamic light scattering, microcalorimetry and by ¹H NMR spectroscopy including the measurements of spin–lattice (T1) and spin–spin (T2) relaxation times for the protons of PNIPAM. As expected, the seed particles grew in hydrodynamic size during the crosslinking polymerization of NIPAM, and a larger NIPAM to seed mass ratio in the polymerization batch led to a larger increase of particle size indicating a product coated with a thicker PNIPAM shell. Broader microcalorimetric endotherms of dehydration were observed for crosslinked PNIPAM on the solid cores compared to the PNIPAM microgels and also an increase of the transition temperature was observed. The calorimetric results were complemented by the NMR spectroscopy data of the ¹H-signal intensities upon heating in D₂O, showing that the phase transition of crosslinked PNIPAM on polystyrene core shifts towards higher temperatures when compared to the microgels, and also that the temperature range of the transition is broader.     

Single freezing and triple melting of micrometre-scaled (NH4)2SO4/H2O droplets

Atmospheric aerosol droplets containing NH(4)(+) and SO(4)(2-) ions are precursors of cirrus ice clouds. However, the low-temperature phase transformation of such droplets is not understood yet. Here we show for the first time that micrometre-scaled (NH(4))(2)SO(4)/H(2)O droplets produce one freezing event but three melting events which are the melting of (i) pure ice, (ii) eutectic ice/(NH(4))(2)SO(4), and (iii) eutectic ice/(NH(4))(3)H(SO(4))(2). We also find that the melting of ice/(NH(4))(3)H(SO(4))(2) consists of two eutectic melting events, presumably ice/letovicite-II and ice/letovicite-III.     

Synthesis, spectroscopic, and structural investigation of the cyclic [N(PR2E)2]+ cations (E = Se, Te; R = iPr, Ph): the effect of anion and R-group exchange

Two-electron oxidation of the [N(PiPr2E)2]- anion with iodine produces the cyclic [N(PiPr2E)2]+ (E =Se, Te) cations, which exhibit long E-E bonds in the iodide salts [N(PiPr2Se)2]I (4) and [N(PiPr2Te)2]I (5). The iodide salts 4 and 5 are converted to the ion-separated salts [N(PiPr2Se)2]SbF6 (6) and [N(PiPr2Te)2]SbF6 (7) upon treatment with AgSbF6. Compounds 4-7 were characterized in solution by multinuclear NMR, vibrational, and UV-visible spectroscopy supported by DFT calculations. A structural comparison of salts 4-7 and [N(PiPr2Te)2]Cl (8) confirms that the long E-E bonds in 4, 5, and 8 can be attributed primarily to the donation of electron density from a lone pair of the halide counterion into the E-E sigma* orbital (LUMO) of the cation. The phenyl derivative [N(PPh2Te)2]I (9) was prepared in a similar manner. However, the attempted synthesis of the selenium analogue, [N(PPh2Se)2]I, produced a 1:1 mixture of [N(PPh2Se)2(mu-Se)][I] (10) and [SeP(Ph2)N(Ph2)PI] (11). DFT calculations of the formation energies of 10 and 11 support the observed decomposition. Compound 10 is a centrosymmetric dimer in which two six-membered NP2Se3 rings are bridged by two I- anions. Compound 11 produces the nine-atom chain {[N(PPh2)2Se]2(mu-O)} (12) upon hydrolysis during crystallization. The reaction between [(TMEDA)NaN(PiPr2Se)2] and SeCl2 in a 1:1 molar ratio yields the related acyclic species [SeP(iPr2)N(iPr2)PCl] (13), which was characterized by multinuclear NMR spectroscopy and an X-ray structural determination.     

Isolation of a stable, acyclic, two-coordinate silylene

The synthesis and characterization of a stable, acyclic two-coordinate silylene, Si(SAr(Me(6)))(2) [Ar(Me(6)) = C(6)H(3)-2,6(C(6)H(2)-2,4,6-Me(3))(2)], by reduction of Br(2)Si(SAr(Me(6)))(2) with a magnesium(I) reductant is described. It features a V-shaped silicon coordination with a S-Si-S angle of 90.52(2)° and an average Si-S distance of 2.158(3) ?. Although it reacts readily with an alkyl halide, it does not react with hydrogen under ambient conditions, probably as a result of the ca. 4.3 eV energy difference between the frontier silicon lone pair and 3p orbitals.     

Pyrolysis-GC-MS reveals important differences in hydrolytic degradation process of wood flour and rice bran filled polylactide composites

Pyrolysis-GC-MS of polylactide (PLA) biocomposites before and after hydrolytic degradation revealed prominent differences in the hydrolytic degradation process of rice bran and wood flour filled biocomposites. The water uptake and mass loss for polylactide/wood flour composites were similar to that of plain PLA. Pyrolysis-GC-MS, however, showed that on prolonged ageing the hydrolysis of PLA led to increased wood flour concentration in the remaining biocomposite matrices. In contrast, the polylactide/rice bran composites exhibited larger water uptake and higher mass loss. Pyrolysis-GC-MS and FTIR analysis proved that the higher mass loss was caused by migration of rice bran from the composites. The type of natural filler could thus greatly influence the degradation process and/or the stability of the materials in aqueous or humid environments.     

Synthesis of copolymer-stabilized silver nanoparticles for coating materials

Silver ions being less toxic than silver nanoparticles, a more safe material can be obtained to be used as antimicrobial coating. This can be achieved by using thiol chemistry and covalently attach the silver nanoparticles in the coating. Our aim is to produce a coating having antimicrobial properties of silver ions but with the silver nanoparticles firmly attached in the coating. Here, we present a way to produce silver nanoparticles that can be used as a component in a coating or as such to produce an antimicrobial coating. The silver nanoparticles presented here are stabilized by a copolymer (poly(butyl acrylate–methyl methacrylate)) that is soft and has well-known good film-producing properties. The reversible addition-fragmentation chain transfer radical polymerization technique used to prepare the polymers provides conveniently a thiol group for effective binding of the silver nanoparticles to the polymers and thus to the coating.     

The cyclic [N(PiPr2E)2]+ (E = Se, Te) cations: a new class of inorganic ring system

The two-electron oxidation of [(tmeda)NaN(PiPr2E)2] with iodine produces the cyclic [N(PiPr2E)2]+ (E = Se, Te) cations, which exhibit long E-E bonds in the iodide salts.     

Comparisons of relative BV-capacities and Sobolev capacity in metric spaces

We study relations between the variational Sobolev 1-capacity and versions of variational BV-capacity in a complete metric space equipped with a doubling measure and supporting a weak (1,1)-Poincaré inequality. We prove the equality of 1-modulus and the continuous 1-capacity, extending the known results for 1<p<∞ to also cover the more geometric case p=1. Then we give alternative definitions for variational BV-capacities and obtain equivalence results between them. Finally we study relations between total 1-capacity and versions of BV-capacity.     

Effect of ligand on the synthesis of star polymers by resorcinarene‐based ATRP initiators

The effect of the steric hindrance on the initiating properties of two multifunctional resorcinarene‐based initiators in atom transfer radical polymerization (ATRP) was studied by using Cu(I)‐complexes of three multidentate amine ligands in the polymerization of tert‐butyl acrylate and methyl methacrylate. These ligands are less sterically hindered and have higher activities in the catalysis of ATRP of (meth)acrylates than 2,2′‐bipyridine. The polymerizations were faster and more controlled than with the 2,2′‐bipyridyl catalyst, but the tendency for bimolecular coupling increased. Even though the initiator was octafunctional, the resulting star polymers had only four arms. This indicates that the steric hindrance arising from the conformations of the initiators determines the structure of the polymer, but the ligand noticeably affects the controllability of the polymerization © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3349–3358, 2005