矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

Systhesis of double-hydrophilic core-shell type multiarm star copolymer polyethylenimine-block-poly(2-hydroxyethyl methacrylate

Multiarm star block copolymers hyperbranched polyethylenimine-b-poly(2-hydroxyethyl methacrylate) (HPEI-b-PHEMA) with average 28 PHEMA arms have been prepared by atom transfer radical polymerization (ATRP) of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuCl and the molar ratio of [CuCl]:[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln([M]0/[M]t) on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic guests, but the amidated HPEI core was more effective than the PHEMA shell.     

H2,CO,CH4多元爆炸性混合气体支链爆炸阻尼效应

对多元爆炸性混合气体爆炸的阻尼效应,进行了比较系统的研究,实验表明：“惰性气体”N2,CO2与水蒸汽对多元混合气体支链爆炸具有一定的抑制作用;甲烷与石油液化气对含H2易爆混合气体支链爆炸具有明显的阻尼效应．这对指导支链燃烧与支链爆炸的实践,关于工业尾气与废气的安全回收,有关爆炸性混合气体的置换技术的改进,以及工业与矿井混合气体爆炸事故的预防,具有重要的现实意义与理论价值．     

Synthesis and Absorption Properties of New Na Specific Adsorbent Li（1＋x）AlxTi（2-x）（PO4）3

A new kind of adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was synthesized by solid state reaction method. The influence of the content of doping aluminum on the adsorbent Li（1＋x）AlxTi（2-x）（PO4）3 was investigated by XRD, while the morphology of powders was observed by SEM. The investigation of the adsorption properties showed that the adsorbent can selectively adsorb sodium with the adsorption capacity of 11.76 mg/g. The optimum conditions of adsorption are at pH 10.0-11.0 in LiCl solution.     

Banach空间中太阳集对无穷序列的最佳同时逼近

本文研究太阳集对一列无穷序列的最佳同时逼近问题，建立了特征及唯一性结果．     

Study of depth-dependent tetragonal distortion of quaternary AIInGaN epilayer by Rutherford backscattering/channeling

<正>A 240-nm thick Al_0.4In_0.02Ga_0.58N layer is grown by metal organic chemical vapour deposition,with an over 1-μm thick GaN layer used as a buffer layer on a substrate of sapphire（0001）.Rutherford backscattering and channeling are used to characterize the microstructure of AlInGaN.The results show a good crystalline quality of AlInGaN(x_min= 1.5%) with GaN buffer layer.The channeling angular scan around an off-normal（1213） axis in the {1010} plane of the AlInGaN layer is used to determine tetragonal distortion e_T,which is caused by the elastic strain in the AlInGaN.The resulting AlInGaN is subjected to an elastic strain at interfacial layer,and the strain decreases gradually towards the near-surface layer.It is expected that an epitaxial AlInGaN thin film with a thickness of 850 nm will be fully relaxed （e_T=0）.     

Polarization of plane wave propagating inside elastic hexagonal system solids

Based on the reported physical parameters for hexagonal system solids,we have calculated the effects of anisotropy on polarization of plane P-wave propagation.Herein we report the results of calculations and the newly observed physical phenomena.It is found that,for a given propagation,if the polarization is parallel to the wave vector,so also to the Poynting vector.In such a case,the phase velocity is identical to the energy velocity;the quasi P-wave degenerates to a pure P-wave along the propagation.It is also noted that if the polarization is parallel to the Poynting vector but not to the wave vector,the propagating wave cannot be a pure P-wave.Furthermore,the polarization in a quasi P-wave may deviate from the wave vector for more than 45°,but the deviation from the Poynting vector is always less than 45°.The energy velocity of a quasi SV-wave can be larger than that of the quasi P-wave in some propagation directions,even though the phase velocity of a quasi SV-wave may never be larger than either the phase velocity or energy velocity of the quasi P-wave.Finally,in case of parameters ε=0 and δ*≠0,the polarization of a quasi P-wave has an observed symmetry at a 45°phase angle.The anisotropy of a hexagonal system solid determines if a pure P-wave can be created and what the propagation direction is for a plane wave propagating inside such a hexagonal system solid.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

Thermally induced structural transformation of polytriazoleimide to polyindoleimide

A new kind of polytriazoleimide containing bisphenyl-l,2,3-triazole（BPT） was synthesized by copper-catalyzed 1,3-dipolar cycloaddition of azides and alkynes（CuAAC） and polycondensation.The thermal stability and degradation mechanism of the polytriazoleimide were investigated.The results show that the structure of BPT in polytriazoleimide transforms to phenylindole after thermal treatment,accompanying the release of N₂.