Surface plasmon resonances of silver triangle nanoplates: graphic assignments of resonance modes and linear fittings of resonance peaks

The extinction spectra of five silver equilateral triangle plates with a fixed thickness of 10 nm and side lengths of 50, 100, 150, 200 ,and 250 nm, respectively, have been simulated by the discrete dipole approximation (DDA) method in which a geometric object of interest is meshed and represented by a lattice of spatial dipoles. Irradiated by an incident plane wave with a given propagation direction and polarization state, each triangle nanoplate presents three surface plasmon resonance (SPR) peaks in the range of 300 to 1200 nm. At a given peak, every complex spatial oscillatory vector derived by DDA (corresponding to a certain dipole in the meshed target) is orthogonally resolved into three basic oscillations. Each basic component can be subsequently expressed by two parameters, amplitude (P) and phase angle (varphi). The distributions of six such physical parameters of all the dipoles in the selected cross plane of the target are illustrated colorfully in plots as a graphic characterization and assignment of the SPR modes. The graphic method is applied to reveal the local fine features of SPR modes. And it provides direct evidence for classifying SPR peaks which belong to different triangle nanoplates and appear at different wavelengths. Three SPR modes are recognized graphically and the wavelengths of SPR peaks are found to have linear relationships with the side lengths of the triangle nanoplates.     

Adventages and limits on usage of thermal methods in complex systems

In order to increase the nutrition value of bread, one of the most commonly used foodstuff all over the world, different additives are used in bread processing. In this paper we describe the thermal changes in bread and that of with 0.5% crude soybean lecithin additive. Their thermal stability has been investigated by TG, DSC and EGD methods. The thermal changes were also followed of soy products, lecithin and lysine, ingredients used as bread additives in order to check if they may suffer any thermal degradation during the baking process. The data obtained can be of use only for qualitative conclusions. According to the obtained data at the usual bread baking temperature only the additives in crust may partly decompose while in the crumb, at lower temperatures the additives, due to baking, are not damaged. The thermal methods give a possibility for rapid estimation of processes induced by heat effects in additives during the baking, and they are suitable to detect the changes during the bread-making procedure. However, they are neither suitable to provide any quantitative data on these changes nor facts affecting the nutrition value and of the bread.     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Ruthenium Carbonyl Cluster Complexes with Phenylgermyl Ligands from the Reactions of Ph<Subscript>3</Subscript>GeH with Ru(CO)<Subscript>5</Subscript> and Ru<Subscript>3</Subscript>(CO)<Subscript>12</Subscript>

Four new triphenylgermylruthenium carbonyl compounds HRu(CO)₄GePh₃, 14; Ru(CO)₄(GePh₃)₂, 15; Ru₂(CO)₈(GePh₃)₂, 16; and Ru₃(CO)₉(GePh₃)₃(μ-H)₃, 17 were obtained from the reaction of Ru(CO)₅ with Ph₃GeH in hexane solvent at reflux, 68 °C. The major product 14 was formed by loss of CO from the Ru(CO)₅ and an oxidative addition of the GeH bond of the Ph₃GeH to the metal atom. This six coordinate complex contains one terminal hydrido ligand. Compound 15 is formed from 14 and contains two trans-positioned GePh₃ ligands in the six coordinate complex. Compound 16 contains two Ru(CO)₄(GePh₃) fragments joined by an Ru–Ru single bond. Compound 17 contains a triangular cluster of three ruthenium atoms with three bridging hydrido ligands and one terminal GePh₃ ligand on each metal atom. When heated to 125 °C, 14 was converted to the new triruthenium compound Ru₃(CO)₁₀(μ-GePh₂)₂, 18. Compound 18 consists of a triangular tri-ruthenium cluster with two GePh₂ ligands bridging two different edges of the cluster and one bridging CO ligand. Ru₃(CO)₁₂ was found to react with Ph₃GeH at 97 °C to yield three products: 15, and two new compounds Ru₃(CO)₉(μ-GePh₂)₃, 19 and Ru₂(CO)₆(μ-GePh₂)₂(GePh₃)₂, 20 were obtained. Compound 19 is similar to 18 having a triangular tri-ruthenium cluster but has three bridging GePh₂ ligands, one on each Ru–Ru bond. Compound 20 contains only two ruthenium atoms joined by a single Ru–Ru bond that has two bridging GePh₂ ligands and a terminal GePh₃ ligand on each metal atom. All compounds were characterized by a combination of IR, ¹H NMR, single-crystal X-ray diffraction analyses. This report is dedicated to Professor Dieter Fenske on the occasion of his 65th birthday for his many pioneering contributions to the chemistry of metal chalcogenide cluster complexes.     

Effects of EG and MoSi2 on thermal degradation of intumescent coating

An intumescent flame retardant coating was prepared with resin, solvent and flame retardant system composed of ammonium polyphosphate-APP, pentaerythritol-PER and melamine-MEL. The modifiers such as molybdenum disilicide (MoSi₂) and expandable graphite (EG) were used to improve the performances of the APP-PER-MEL coating. The effects of EG, MoSi₂ and MoSi₂/EG on the fireproofing time and char formation of the coating were investigated by using heat insulation test, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electric microscope (SEM). The results showed that by adding modifiers, the fireproofing time was prolonged and char formation rate was evidently enhanced. The largest improvement was achieved with 9 wt.% MoSi₂/5 wt.% EG, XPS analysis indicated that the performance of anti-oxidation of the coating was improved by adding EG and MoSi₂, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by MoSi₂ covered on the surface of “open-cellular” structural char.     

Vapor-liquid and vapor-solid phase equilibria for united-atom benzene models near their triple points: the importance of quadrupolar interactions

Gibbs ensemble Monte Carlo simulations were used to calculate the vapor-liquid and vapor-solid coexistence curves for benzene using two simple united-atom models. An extension of the Gibbs ensemble method that makes use of an elongated box containing a slab of the condensed phase with a vapor phase along one axis was employed for the simulations of the vapor-solid equilibria and the vapor-liquid equilibria at very low reduced temperatures. Configurational-bias and aggregation-volume-bias Monte Carlo techniques were applied to improve the sampling of particle transfers between the two simulation boxes and between the vapor and condensed-phase regions of the elongated box. An isotropic united-atom representation with six Lennard-Jones sites at the positions of the carbon atoms was used for both force fields, but one model contained three additional out-of-plane partial charge sites to explicitly represent benzene's quadrupolar interactions. Both models were fitted to reproduce the critical temperature and density of benzene and yield a fair representation of the vapor-liquid coexistence curve. In contrast, differences between the models are very large for the vapor-solid coexistence curve. In particular, the lack of explicit quadrupolar interactions for the 6-site model greatly reduces the energetic differences between liquid and solid phases, and this model yields a triple point temperature that is about a factor of 2 too low. In contrast, the 9-site model predicts a triple point of benzene at T = 253 +/- 6 K and p = 2.3 +/- 0.8 kPa in satisfactory agreement with the experimental data (T = 278.7 K and p = 4.785 kPa).     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Enhanced selectivity and sensitivity for inorganic anions using an ion-pairing reagent and sample stacking in capillary zone electrophoresis with direct UV detection

In this paper, the use of an ion-pairing reagent to improve the separation selectivity of inorganic anions in CZE was demonstrated by the addition of tetramethylammonium hydroxide (TMAOH) to the electrolyte. The separation of inorganic anions (Cl(-), I(-), Br(-), NO(2)(-), NO(3)(-) and SCN(-)) was performed using co-electroosmotic flow (EOF) with direct UV detection at 185 nm. The parameters affecting the mobility of the tested anions and the EOF such as the electrolyte pH and concentration of TMAOH in the electrolyte were examined to optimise the separation conditions. In addition, sample-stacking techniques were investigated to improve detection sensitivity. Detection sensitivities were improved 5-13-fold using electrokinetic sample stacking. The detection limits ranged from 1-3 micro mol L(-1). Finally, the proposed method was used for the separation of anions in groundwaters.