Determination of the plant growth regulator chlormequat in food by liquid chromatography-electrospray ionisation tandem mass spectrometry

A confirmatory method for the determination of trace levels of chlormequat in a variety of different food matrices was developed. It entails a single clean-up step over a solid-phase cation exchange resin and subsequent liquid chromatography-electrospray ionisation tandem mass spectrometry using a stable isotopically labelled internal standard. Mass spectral acquisition was done in selected reaction monitoring mode, selecting the transitions from both the 35Cl and the 37Cl isotope of chlormequat. Recoveries after extraction and clean-up, determined with radio-labelled chlormequat and averaged over the spiking range (16-65 microg kg(-1)) in four different commodities, were within 88-96%, with a coefficient of variation better than 8%. The method can be applied to pears, pear juice concentrates, fruit purées, and cereal products, with typical limits of detection for chlormequat estimated at 2-5 microg kg(-1). A survey of different food commodities revealed that chlormequat was detectable--albeit at very low levels--in many of the food samples analysed, with the highest concentration recorded in pears purchased in Switzerland and of South African origin (5.5 mg kg(-1)). Measurements were also conducted on two LC-MS instruments and demonstrate the versatility and robustness of the method and its applicability to instruments of different ion source design.     

Evolution of defect signatures at ferroelectric domain walls in Mg‐doped LiNbO3

The domain structure of uniaxial ferroelectric lithium niobate single crystals is investigated using Raman spectroscopy mapping. The influence of doping with magnesium and poling at room temperature is studied by analysing frequency shifts at domain walls and their variations with dopant concentration and annealing conditions. It is shown that defects are stabilized at domain walls and that changes in the defect structures with Mg concentration can be probed by the shift of Raman modes. We show that the signatures of polar defects in the bulk and at the domain walls differ. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

2D Transition Metal Dichalcogenides for Photocatalysis

Two-dimensional (2D) transition metal dichalcogenides (TMDs), a rising star in the post-graphene era, are fundamentally and technologically intriguing for photocatalysis. Their extraordinary electronic, optical, and chemical properties endow them as promising materials for effectively harvesting light and catalyzing the redox reaction in photocatalysis. Here, we present a tutorial-style review of the field of 2D TMDs for photocatalysis to educate researchers (especially the new-comers), which begins with a brief introduction of the fundamentals of 2D TMDs and photocatalysis along with the synthesis of this type of material, then look deeply into the merits of 2D TMDs as co-catalysts and active photocatalysts, followed by an overview of the challenges and corresponding strategies of 2D TMDs for photocatalysis, and finally look ahead this topic.     

Intramolecular direct aldol reactions of sugar diketones: syntheses of valiolamine and validoxylamine G

A new and stereoselective intramolecular direct aldol reaction of diketones derived from carbohydrates has been developed to construct carbocycles with D-gluco-, D-galacto-, D-manno-, and L-ido-configurations. The stereochemical outcome of the aldol reaction of the diketone is dependent on the base used. Transformation of D-gluco-aldols readily affords valiolamine which also constitutes a formal synthesis of voglibose. Facile conversion of D-gluco-cyclohexanones into validoxylamine G has been achieved in 12 steps with 15.1% overall yield from D-glucose.     

High sintering resistance of platinum nanoparticles embedded in a microporous hollow carbon shell fabricated through a photocatalytic reaction

Platinum (Pt) nanoparticles encapsulated in microporous carbon with a hollow structure (nPt@hC) were fabricated on the basis of a titanium(IV) oxide (TiO2) photocatalytic reaction. From the tomogram of a sample studied by using a transmission electron microscope (TEM), the Pt nanoparticles were found to be embedded in the carbon shell and were physically separated from each other by the carbon matrix. Owing to this unique structure, the Pt particles showed high resistance to sintering when subjected to thermal treatment at temperatures up to 800 degrees C. As a result, hydrogenation reactions using various heat-treated nPt@hCs as catalysts indicated that loss of catalytic activity was minimized. Thus, the present system will be a promising system for optimizing catalyst nanostructures utilized in processes requiring rigorous conditions.     

Investigation of folic acid stability in fortified instant noodles by use of capillary electrophoresis and reversed-phase high performance liquid chromatography

A single enzyme treatment with alpha-amylase, prior to the quantification of added folic acid (FA) in fortified instant fried Asian noodles with analysis performed by capillary zone electrophoresis (CZE) and reversed-phase high performance liquid chromatography (RP-HPLC) with UV detection, is described. The method was validated and optimized for capillary electrophoresis (CE) with separation achieved using a 8 mM phosphate-12 mM borate run buffer with 5% MeOH at pH 9.5. FA was well separated from matrix components with nicotinic acid (NA) employed as an internal standard. In a comparative study, separation of FA was performed using HPLC with a mobile phase consisting of 27% MeOH (v/v) in aqueous potassium phosphate buffer (3.5 mM KH(2)PO(4) and 3.2 mM K(2)HPO(4)), pH 8.5, and containing 5 mM tetrabutylammonium dihydrogen phosphate as an ion-pairing agent. For both methods, excellent results were obtained for various analytical parameters including linearity, accuracy and precision. The limit of detection was calculated to be 2.2 mg/L for CE without sample stacking and 0.10 mg/L with high performance liquid chromatography (HPLC). Sample extraction involved homogenization and enzymatic extraction with alpha-amylase. Results indicated that FA was stable during four main stages of instant fried noodle manufacturing (dough crumbs, cut sheets, steaming and frying).     

Photocorrosion of Cuprous Oxide in Hydrogen Production: Rationalising Self‐Oxidation or Self‐Reduction

Cuprous Oxide (Cu₂O) is a photocatalyst with severe photocorrosion issues. Theoretically, it can undergo both self‐oxidation (to form copper oxide (CuO)) and self‐reduction (to form metallic copper (Cu)) upon illumination with the aid of photoexcited charges. There is, however, limited experimental understanding of the “dominant” photocorrosion pathway. Both photocorrosion modes can be regulated by tailoring the conditions of the photocatalytic reactions. Photooxidation of Cu₂O (in the form of a suspension system), accompanied by corroded morphology, is kinetically favourable and is the prevailing deactivation pathway. With knowledge of the dominant deactivation mode of Cu₂O, suppression of self‐photooxidation together with enhancement in its overall photocatalytic performance can be achieved after a careful selection of sacrificial hole (h⁺) scavenger. In this way, stable hydrogen (H₂) production can be attained without the need for deposition of secondary components.     

Acetone–Butanol–Ethanol Production from Waste Seaweed Collected from Gwangalli Beach,Busan, Korea,Based on pH-Controlled and Sequential Fermentation Using Two Strains

The optimal conditions for acetone–butanol–ethanol (ABE) production were evaluated using waste seaweed from Gwangalli Beach, Busan, Korea. The waste seaweed had a fiber and carbohydrate, content of 48.34%; these are the main resources for ABE production. The optimal conditions for obtaining monosaccharides based on hyper thermal (HT) acid hydrolysis of waste seaweed were slurry contents of 8%, sulfuric acid concentration of 138 mM, and treatment time of 10 min. Enzymatic saccharification was performed using 16 unit/mL Viscozyme L, which showed the highest affinity (K_m?=?1.81 g/L). After pretreatment, 34.0 g/L monosaccharides were obtained. ABE fermentation was performed with single and sequential fermentation of Clostridium acetobutylicum and Clostridium tyrobutyricum; this was controlled for pH. A maximum ABE concentration of 12.5 g/L with Y_ABE 0.37 was achieved using sequential fermentation with C. tyrobutyricum and C. acetobutylicum. Efficient ABE production from waste seaweed performed using pH-controlled culture broth and sequential cell culture.     

Correlations of Anion Size and Symmetry with the Structure and Electronic Properties of β-(BEDTTTF)2X Conducting Salts with Trihalide Anions X = 13-, 12Br-, 1Br2-

In the isostructural series of β-(BEDT-TTF)₂X organic metals, abbreviated β-(ET)₂X, where X is a trihalide anion, I₃-, I₂Br- or IBr₂-, and where ET is bis-(ethylenedithio) tetrathiafulvalene (C₁₀S₈H₈), the salt containing the disordered asymmetric I₂Br- anion has atypical structural and electronic properties compared to those containing the symmetrical and ordered I-₃ and IBr₂- anions.