InGaN/GaN laser diode characterization and quantum well number effect

The effect of quantum well number on the quantum efficiency and temperature characteristics of In- GaN/GaN laser diodes （LDs） is determined and investigated. The 3-nm-thick In0.13Ca0.87N wells and two 6-am-thick GaN barriers are selected as an active region for Fabry-Perot （FP） cavity waveguide edge emitting LD. The internal quantum efficiency and internal optical loss coefficient are extracted through the simulation software for single, double, and triple InGaN/GaN quantum wells. The effects of device temperature on the laser threshold current, external differential quantum efficiency （DQE）, and output wavelength are also investigated. The external quantum efficiency and characteristic temperature are improved significantly when the quantum well number is two. It is indicated that the laser structures with many quantum wells will suffer from the inhomogeneity of the carrier density within the quantum well itself which affects the LD performance.     

Characterization of AZ91D Granules Covered with a Flux during In‐Situ Melting

Oxidation and melting behaviors of AZ91D granules throughout the in‐situ melting process using flux were investigated. The granules were heated under unprotected environment at four different temperatures between 650 and 800 °C, for the durations of 30 and 60 min. The products of heating process were characterized macroscopically and the oxides formed on the granules were examined using field emission scanning electron microscope, energy dispersive X‐ray spectroscopy and X‐ray diffraction analysis. Thermal analysis was used to reveal the response of the granules to heating during the in‐situ melting. The results showed that the granules experienced severe oxidation even in the presence of the flux, and significant amount of them changed to a powdered state due to oxidation and combustion, especially at 800 °C. It was discovered that the granules melted during heating; however, oxides formed on their surface encapsulated the molten metal and prevented the liquids from merging. The results also revealed that increasing heating temperature and time enhanced mold‐magnesium reaction resulted in the entrance of mold materials into the oxidation residues.     

Synthesis and characterization of Ni(II) complex functionalized silica-based magnetic nanocatalyst and its application in C–N and C–C cross-coupling reactions

Molecular Diversity - A new magnetically recoverable silica-based nickel(II) nanocatalyst was synthesized by a simple cost-effective procedure, which was characterized by TEM, SEM, XRD, VSM...     

Study of the critical current density and the thermodynamic critical field in deuterated κ-(BEDT-TTF)2Cu[N(CN)2]Br organic superconductor

ABSTRACT

We have studied the reversible and irreversible part of the hysteresis loops as a function of slow cooling rate through the order–disorder transformation near 80?K for the deuterated (κ-D₈-Br) κ-(BEDT-TTF)₂Cu[N(CN)₂]Br organic superconductor. We estimated the critical current density J_C and the thermodynamic critical field H_C from the magnetic hysteresis loops. Temperature dependence of the critical current density derived from the irreversible part using Bean’s model. The thermodynamic critical field H_C has been obtained from the reversible part of the hysteresis loops.     

An inverse design approach for magnetic lenses operated under infinite magnification condition

A theoretical-computational investigation has been carried out to describe a synthesis optimization procedure of asymmetrical magnetic lenses with the aid of numerical analysis methods. Where a certain mathematical form for the electron beam is proposed to be a target function. This function has several optimization parameters where the influence of each of them, when the other ones kept fixed, is investigated. Results have clearly shown that some of the optimization parameters have a considerable effect on the first order properties, third order aberrations and the reconstructed polepieces. While the others have no significant influence on these physical and geometrical properties. Furthermore, the results obviously show that there is an excellent ability for producing a conventional magnetic field for the double polepieces lenses.     

Detection and dosimetry of gamma ray emitted from thallium-201 and technetium-99m based on chemiluminescence technique

This report describes the detection and dosimetry of gamma ray emitted from Thallium-201 (²⁰¹Tl) and Technetium-99m (^99mTc) based on chemiluminescence technique. H₂O₂ produced by two gamma emitter radioisotopes of ²⁰¹Tl and ^99mTc were quantitatively measured by chemiluminescence method. Upon producing H₂O₂ in a luminol alkaline solution, in the presence of diperiodatocuprate, as catalyst a chemical reaction was accrued and consequently the emitted light was measured. The determined H₂O₂ concentration was correlated with the gamma ray detection and dosimetry. The sensitivity of chemiluminescence technique for ²⁰¹Tl and ^99mTc dosimetry was determined to be 0.20 and 0.08 MBq/l (Mega Becquerel per liter) respectively (R.S.D. = %5, N = 3). The plotted calibration curves showed detection limits of 3.24 and 1.76 MBq/l for ²⁰¹Tl and ^99mTc, respectively.     

Effect of the spectral profile of a deriving field on the bistability of a dissipative medium

 Through the differential equation describing the behavior of the nonlinear polarization of a medium with respect to an incident field, the Maxwell field equations and the boundary conditions of the field inside a resonator, the relationship between the output and the incident fields is obtained, describing a bistability phenomena. The effect of the spectral profile of the incident field and its spectral halfwidth on the bistability phenomena is studied.     

Carbon-13 NMR Study of 2,4,6-Triaryl Pyridinium Salts

The carbon-13 chemical shift of seventeen N-substituted 2,4,6-triphenyl pyridinium salts (TPP) and N-substituted 2,4,6-triaryl pyridinium (TsPP) salts have been determined.     

Investigation of Heisenberg algebra for a modified anti-de Sitter and modified antiSnyder models

In this paper,we consider a possible modification of the de Sitter and anti-de Sitter space for the extended uncertainty principle.For the modified anti-de Sitter model we discuss the representation and wave functions of the momentum operator for a one-dimensional box problem.Also,we consider modified Snyder and anti-Snyder models for the generalized uncertainty principle.Then,we assume the Hamiltonian with different potential and solve the Heisenberg algebra for the modified(anti)-de Sitter and(anti)-Snyder models in both position and in the momentum space.     

Analysis,design and simulation of MIM plasmonic filters with different geometries for technical parameters improvement

In this paper, four optical filter topologies based on metal–insulator–metal waveguides are proposed and the designed structures are investigated numerically using finite-difference timedomain method. Triangular-shaped adjunctions have been added to the filter structures to improve their transmission spectrum. These improved structures consist of air as the insulator and silver as the metal. The relative permittivity of metal has been described via the Drude,Drude–Lorentz, and Palik models. The first filter's transmission spectrum shows an acceptable transmittance. In the second optimized filter, the transmission spectrum has been improved. The transmittance spectrum can be tuned through adjusting the edge of the triangle in these four optimized filters. As a result, the bandwidths of resonance spectra can be adjusted. The theory of such tapered structures will be investigated by the tapered transmission line and will be solved with the transfer matrix method. This method shows a better performance and higher transmission efficiency in comparison with the basic structures. On the other hand, the final filter has been chosen as the best one because of its hexagonal resonator. The main reason for having a better result is due to a longer interaction length in comparison with the circular resonator. This in turn creates much better energy coupling and results in higher transmission.