New resolution of 2-formyl-1,4-dhp derivatives using CIDR methodology. Facile access to new chiral tricyclic thiolactam

(R)- and (S)-alpha-phenylethylamine (alpha-PEA: 7) have been used separately to resolve successfully a racemate 2-formyl-1,4-DHP derivative 4. The process was based on the difference of the solubility of both Schiff bases (6) since one of them crystallized out from the solution. These imines obtained by condensation of (R)-alpha-PEA (7) or (S)-alpha-PEA (7) with aldehyde (rac-4) were separated and analyzed by X-ray diffraction, and their exposition to an hydrochloric hydrolysis conditions led to the enantiopure (4R)-4 or (4S)-4 in excellent yields. Separate condensation of other chiral (8 and 13) and racemic (18) amino thiols as auxiliary with rac-4, (4S)-4, or (4R)-4 is accompanied by an in situ crystallization-induced dynamic resolution, whereby one distereomer of thiazole template selectively precipitates and can be isolated by simple filtration in 76-82% yield with dr > 99. The thiazole species isolated from this process resulted from an amino aldehyde condensation followed by a spontaneous thiol-imine cycloaddition. Finally, the racemate (+/-)-(4R,2'R)-19 and the diastereomerically pure homologous (4S,2'R)-23 and (4R,2'S)-20 (obtained in good yields (79-82%) from 2-aminoethanethiol (18) and 2-formyl-1,4-DHP derivative rac-4, (4S)-4, or (4R)-4, respectively) were converted conveniently in a one-pot procedure into newly tricyclic thiolactams in the DHP series in racemic ((+/-)-(6R,9bR)-21, 72% yield)) and enantiopure ((6S,9bR)-24, 71% yield); (6R,9bS)-24, 70% yield) forms.     

PVC membrane based potentiometric sensors for uranium determination

Two novel uranyl PVC matrix membrane sensors responsive to uranyl ion are described. The first sensor incorporates tris(2-ethylhexyl)phosphate (TEHP) as both electroactive material and plasticizer and sodium tetraphenylborate (NaTPB) as an ion discriminator. The sensor displays a rapid and linear response for UO₂²⁺ ions over the concentration range 1×10⁻¹–2×10⁻⁵ mol l⁻¹ UO₂²⁺ with a cationic slope of 25.0±0.2 mV decade⁻¹. The working pH range is 2.8–3.6 and the life span is 4 weeks. The second sensor contains O-(1,2-dihydro-2-oxo-1-pyridyl)-N,N,N′,N′-bis(tetra-methylene)uronium hexafluorophosphate (TPTU) as a sensing material, sodium tetraphenylborate as an ion discriminator and dioctyl phenylphosphonate (DOPP) as a plasticizer. Linear and stable response for 1×10⁻¹–5×10⁻⁵ mol l⁻¹ UO₂²⁺ with near-Nernstian slope of 27.5±0.2 mV decade⁻¹ are obtained. The working pH range is 2.5–3.5 and the life span of the sensor is 6 weeks. Interference from many inorganic cations is negligible for both sensors. However, interference caused by some ions (e.g. Th⁴⁺, Cu²⁺, Fe³⁺) is eliminated by a prior ion exchange or solvent extraction step. Direct potentiometric determination of as little as 5 μg ml⁻¹ uranium in aqueous solutions shows an average recovery of 97.2±1.3%. Application for the determination of uranium at levels of 0.01–1 wt.% in naturally occurring and certified ores gives results with good correlation with data obtained by X-ray fluorescence.     

PVC Membrane electrodes for manual and flow-injection determination of tetraphenylborate: Applications to separate and sequential titrations of some metal ions

Three novel poly (vinyl chloride) matrix membrane electrodes, highly sensitive and selective for tetraphenylborate anion (TPB), are developed and electrochemically evaluated. They are based on the use of iron(II) bathophenanthroline, nickel(II) bathophenanthroline-and nitron-TPB ion-pair complexes as electroactive materials with dioctylphthalate (DOP) and 2-nitrophenyl phenyl ether (NPPE) as plasticizing solvent mediators. The electrodes exhibit stable and rapid near-Nernstian response for 10(-2)-10(-6)M TPB over the pH range 4-10. Use of these electrodes for direct potentiometric determination and potentiometric titration of as low as 1 mug of TPB/ml and 0.6 mg of TPB/ml give results with average recoveries of 99.3% (mean standard deviation 0.5%) and 99.4% (mean standard deviation 0.2%), respectively. Incorporation of nitron-TPB PVC sensor in a flow-through sandwich cell provides an efficient flow-injection detector for determining TPB with an input rate of at least 60 samples/hr. The limit of detection is 1.6 mug TPB/ml in a 20-mul sample. The electrodes are also used to monitor separate and sequential titrations of some metal ions with TPB. Alkaline earth and transition-metal ions upon reaction with polyethylene glycol and ethylenediamine, respectively, form cationic complexes readily titrated with TPB. Optimum conditions are outlined for sequential titrations of various combinations of metallic species.     

Conformational Stability from Variable-Temperature Infrared Spectra of Krypton Solutions, Ab Initio Calculations, and r o Structural Parameters of Chlorocyclopentane

The infrared spectra (3500–400 cm^–1) of krypton solutions of chlorocyclopentane, c-C₅H₉Cl, at variable temperatures (–101 to –150°C) have been recorded and the fundamental vibrations of the axial conformer and several of those for the equatorial form have been assigned. Utilizing two pairs of fundamentals for the two conformers in the krypton solution, an enthalpy difference of 145±15 cm^–1 (1.73±0.18 kJ-mol^–1) has been obtained with the axial conformer the more stable form. It is estimated that there is 67±2% of the axial conformer present at ambient temperature. Convincing spectroscopic evidence shows that a significant percentage of the chlorocyclopentane molecules are undergoing pseudorotation at ambient temperature. The conformational stabilities, harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation and these quantities have been compared to the experimental values when appropriate. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2 calculations as well as by density functional theory (DFT) by the B3LYP method with several different basis sets. The adjusted r ₀ structural parameters have been obtained for both conformers by combining the ab initio data with the previously reported microwave rotational constants. These new values of the structural parameters for both conformers are compared to those previously reported from electron diffraction and microwave studies. These results are compared to the corresponding quantities of some similar molecules.     

Synthesis of Hexahydro-<Emphasis Type="Italic">1H</Emphasis>-pyrido[3,2-<Emphasis Type="Italic">c</Emphasis>]azepines as Hypotensive Agents of Expected Calcium-Channel Blocking Activity

Summary. Michael addition reaction of 3-(4-fluorophenylamino)-2-cyclohexenone and its 5,5-dimethyl derivative to the acrylonitrile derivatives afforded the novel hexahydroquinolines. The target hexahydro-1H-pyrido[3,2-c]azepine derivatives were obtained via ring enlargement of the corresponding hexahydroquinolines under Schmedt conditions. Some novel pyrido[3,2-c]azepines showed hypotensive activity in vivo on normotensive anaesthetized male adult albino rats and their effects on the ventricular contraction and auricular rate of isolated rabbit hearts using Langendorff’s method and nefidipine as a reference drug were studied. Compounds 29 and 36 which bear some structural similarities to nefidipine exhibited the highest hypotensive activity and negative inotropic as well as chronotropic activities.     

Supported palladium oxide nanoparticles in Al-SBA-15 as an efficient and reusable catalyst for the synthesis of pyranopyrazole and benzylpyrazolyl coumarin derivatives via multicomponent reactions

An eco-friendly method for diversity-oriented synthesis of substituted dihydropyrano[2,3-c]pyrazole and benzylpyrazolyl coumarin derivatives has been achieved via one-pot and multicomponent reaction in the presence of PdO/Al-SBA-15 as an efficient and recyclable catalyst in H₂O/EtOH under reflux conditions. The significant merits of this method are wide scope, high yields of the desired products, short reaction times and simple workup procedure. In addition, this nanocatalyst was simply recovered and reused five times without significant loss in catalytic activity and also performance.

Graphical abstract

     

Effect of polyvinylchloride on the properties of rubber vulcanizates

Natural rubber (NR) and styrene-butadiene rubber (SBR) were compounded with polyvinylchloride (PVC). Some physico-mechanical and dielectric properties of resulting rubber vulcanizates were measured. It was found that the addition of PVC to both NR and SBR results in slight decreases in tensile strength and elongation at break but a marked increase in oil-resistance of the vulcanizates. Moreover, the addition of PVC to NR slightly increases both dielectric constant and dielectric losses while the addition of PVC to SBR loaded with 50 phr carbon black (HAF) lowers these parameters. Both rubber blends, especially NR, show a reasonable stability with ageing.     

Potentiometric studies on the complexes of tetracycline (TC) and oxytetracyclin (OTC) with some metal ions

Summary The interaction of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), Hg(II), Pb(II), Al(III), and UO₂(II) ions with tetracycline (TC) were studied by potentiometricpH titrations. The formation constants of the different binary complexes formed in such systems have been determined at 25±0.1°C and =0.1 moll^–1 (NaNO₃). PotentiometricpH equilibrium measurements have been made under the same conditions for the interaction of oxytetracycline (OTC) and Cu(II), Cd(II), Pb(II), and UO₂(II). The formation of (1:1) binary complexes are inferred from the potentiometricpH tritration curves. The protonation constants ofTC andOTC were also determined under the same conditions and refined (ESAB2M computer program). The transition metal stability constants are consistent with the Irving-Williams series.

---

Potentiometrische Untersuchungen der Komplexe von Tetracyclin (TC) and Oxytetracyclin (OTC) mit einigen Metall-Ionen

Zusammenfassung Die Wechselwirkungen von Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II), Hg(II), Pb(II), Al(III) und UO₂(II) Ionen mit Tetracyclin (TC) wurden mittels potentiometrischerpH-Titrationen untersucht. Die Komplexbildungskonstanten wurden bei 25±0.1°C und =0.1 mol/1(NaNO₃) bestimmt. Unter den gleichen Bedingungen wurden die Komplexierung von Cu(II), Cd(II), Pb(II) und UO₂(II) mit Oxytetracyclin (OTC) mittel potentiometrischerpH Gleichgewichtsmessungen untersucht. Aus den potentiometrischenpH-Titrationskurven ergab sich die Bildung von (1:1) binären Komplexen. Die Protonierungskonstanten vonTC undOTC wurden ebenfalls bestimmt und rechnerisch verfeinert (ESAB2M Computer Programm). Die Stabilitätskonstanten für die Übergangsmetalle stimmen mit der Irving-Williams Reihe überein.

     

Regioselectivity in the reactions of diphenylnitrilimine with coumarin and chromone

The cycloaddition of diphenylnitrilimine with coumarin and chromone gave the cycloadducts 4 and 5 respectively. The structures of these products were based on elemental and spectral analyses and alternate synthesis. The orientations of the cycloaddition are interpreted in terms of FMO theory.     

DFT study of molecular structure and electronic properties of fluoromethylpyrrole oligomers including di-, tri- and tetramer

Structural and electronic properties of oligomers including dimer, trimer and tetramer of fluoromethylpyrroles (FMPs), NC₄H₄-CH_nF_3−n with n = 0, 1, 2, 3, and their radical cations have been studied using DFT-B3LYP method with 6-31G(d, p) basis set. FMPs are proposed in this research as candidate monomers for conducting polymers with modified characteristics compared to polypyrrole and polymethylpyrrole. A preliminary study using a set of ab initio computations (HF) with medium basis set was carried out on di-, tri- and tetramer in order to investigate the stability of configuration of polymer chains for FMPs. The B3LYP/6-31G** optimized geometry and stereochemistry show that the selectivity of branching of the propagating polymer chain is affected by the characteristics of the substitutions of monomer and, therefore, the growth pattern of the polymer chain can be predicted upon characterization of different centers of the monomers. Also, the results of this study, including quinoid coefficients, orbital energy spacing, charge- and spin-density distributions and electric dipole moment vectors show that conducting polymers consisted of trifluoromethyl pyrrole (Py-CF₃), compared with the other FMPs, are the most favorable to be used as monomers for conducting polymer structural and electronic properties.