A thermodynamic analysis on the coincidence of extrema conditions in the sorption equilibrium for ternary polymer systems

Flory-Huggins theory of polymer solutions has been used to express the condition of extrema values in the total sorption, as well as the inversion point in the preferential adsorption parameters for termary polymer systems. Two approaches have been followed, the first considers the binary and ternary interaction parameters independent of polymer concentration and solvent composition. In the second one, this dependence has been introduced. Our attention is focused on the volume fraction of solvent mixture dependence of the above parameters, in order to confirm or not the coincidence between the extrema values and the inversion point. Several cosolvent and cononsolvent ternary polymer systems, have been used to test the validity of the equations obtained. Also, it has been verified, from an experimental point of view, that in cosolvent ternary polymer systems there is coincidence in both compositions while in cononsolvent ternary polymer systems, such coincidence does not appear.     

High performance liquid chromatography post-column chemiluminescence determination of sulfonamide residues in milk at low concentration levels using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate as chemiluminescent reagent

The determination of seven sulfonamides by means of HPLC with chemiluminescence detection is proposed for the first time. The analytes are derivatized with fluorescamine, separated and subsequently they participate in the post-column chemiluminescence (CL) peroxyoxalate system using imidazole as a catalyst. Among the different peroxyoxalates tested, bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl] oxalate provides higher sensitivities and stabilities, avoiding precipitation problems. A rigorous optimization of the significant variables by means of experimental designs has been developed in order to reconcile the chromatographic conditions with the CL reaction. The method provides detection limits in the low microgl(-1) range and has been satisfactorily applied to the analysis of spiked raw milk samples.     

The synthesis and characterisation of 1′-ethynyl-2,5-dimethylazaferrocene and derivatives

The synthesis of 1′-ethynyl-2,5-dimethylazaferrocene is reported along with its cyclic voltammetry measurements and the X-ray structure determination of its W(CO)₅-complex. Basic coordination and organic chemistry of 1′-ethynyl-2,5-dimethylazaferrocene is also presented via derivatives incorporating cis-Pt(dppe) and Si(Et)₃ units.     

Clustering of chemical databases by means of the projection of maximum overlapping sets similarity measurements onto multidimensional spaces

In this paper, we propose a new method for clustering of chemical databases based on the representation of measurements of structural similarity onto multidimensional spaces. The proposed method permits the tuning of the clustering process through the selection of the dimension of the projection space, the normal vectors and the sensibility of the projection process. The structural similarity of each element regarding to the database elements is projected onto the defined spaces generating clusters that represent the characteristics and diversity of the database and whose size and characteristics can be easily adjusted.     

Surface modification of pyrophyllite with amino silane coupling agent for the removal of 4-nitrophenol from aqueous solutions

The surface of naturally hydrophobic mineral pyrophyllite was modified to hydrophilic by treatment with prehydrolyzed N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (APEO) coupling agent to prepare a novel and effective adsorbent for the removal of 4-nitrophenol (4-NP) from aqueous solutions. XRD, FTIR, and SEM analyses were used to characterize the surface modification. It was found that after the grafting procedure, heat treatment at 110 degrees C results in condensation reaction between the OH groups of the APEO molecule and the hydroxyl groups and/or oxygen atoms on the pyrophyllite surface and the adsorption of 4-NP by APEO-modified pyrophyllite involves interactions between dissociated 4-NP molecules and protonated amine groups of APEO molecules attached to the mineral surface. Adsorption equilibrium data for 4-NP adsorption on APEO-treated and untreated pyrophyllite were most satisfactorily fitted using the Freundlich adsorption isotherm and adsorption capacity was found to be 0.268 mg/g for modified pyrophyllite whereas it was only 0.105 mg/g for untreated pyrophyllite.     

Pyrylium-containing polymers as sensory materials for the colorimetric sensing of cyanide in water

A sensory polymeric material for the colorimetric sensing of cyanide in water has been developed based on the reactivity of this anion with the pyrylium cation.     

Complex emulsion inversion pattern associated with the partitioning of nonionic surfactant mixtures in the presence of alcohol cosurfactant

Commercial ethoxylated nonionic surfactant mixtures containing alcohol cosurfactant exhibit a three-phase behavior whose formulation strongly varies with the water/oil ratio. As a consequence, a change in water/oil ratio can result in a sequence of up to three different emulsion inversion processes, through a combination of formulation and composition effects.     

Flow injection flame atomic absorption spectrometry for slurry atomization: Determination of manganese, lead, zinc, calcium, magnesium, iron, sodium and potassium in cements

A flame atomic absorption spectrometric procedure for the rapid determination of manganese, lead, zinc, calcium, magnesium, iron, sodium and potassium in cements is described. For minor components, slurries are prepared in the 0.05–0.25% m/v range by direct suspension of the samples in a medium containing 2% v/v nitric acid, 2% hydrofluoric acid and 30% v/v glycerol. 50–200 l aliquots are injected in a simple flow injection manifold using water as the carrier. When determining major components, the FI manifold includes an easy-to-construct variable volume chamber allowing the on-line dilution of the suspensions. The degree of dilution can be easily modified to obtain signals within the linear response range of the instrument. Aqueous standards are used for calibration. The data obtained for six cements agree with those obtained by conventional procedures based on the compl ^M v£e ^w ete dissolution of the samples.     

Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

新型树状大分子核醚-四硅烷的合成

以季戊四醇为原料合成了一种新型树状大分子核--醚-四硅烷,可用于树状大分子构筑.通过季戊四醇(1)与溴丙烯的醚化反应得到四烯丙基醚2,然后在Pt催化作用下,2与硅氯仿通过硅氢化反应生成醚-四(三氯硅烷) 3(可直接与多种官能团反应生成树状大分子),3经过LiAlH4还原后得到目标产物醚-四硅烷4.通过IR, 1H NMR, 13C NMR对中间体和目标产物的结构进行了表征,并对产物的结构进行了讨论和确认.