Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.     

Comparative characterization study of microporous carbons by HRTEM image analysis and gas adsorption

The present work presents a useful comparison of micropore size distributions (MPSDs) obtained from gas adsorption and image analysis of high-resolution transmission electron micrographs. It is shown that the MPSD obtained for a chemical activated carbon is concordant with that obtained from CO2 adsorption. In addition, this technique has allowed us to obtain the MPSD of a carbon molecular sieve (CMS) prepared in our laboratory by a copyrolysis process, which could only be characterized by CO2 adsorption at 273 K (not by N2 adsorption at 77 K due to diffusional problems). The MPSD obtained by high-resolution transmission electron microscopy (HRTEM) for the CMS is wider than that obtained by CO2 adsorption, suggesting that HRTEM is detecting the closed porosity existing in this sample, which is not accessible to gas adsorption. The existence of closed porosity in the CMS is explained considering the preparation method used. Thus, HRTEM combined with image analysis seems to be useful for structural analysis of narrow micropores including closed porosity.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

Polymerization of vinyl monomers by the reaction products of diphenyl sulphoxide with potassium

Diphenyl sulphoxide (DPSO) reacts with an equimolar amount of potassium (K) in tetrahydrofuran (THF) at ?78° to form a reddish-black solution, giving an electron spin resonance (ESR) signal only below ?70°. The signal is attributed to a very labile DPSO anion radical. The solution of DPSO-K (1/1) reaction products reacts further with another molecular amount of K at this temperature to give no ESR signal. The DPSO-K (1/1) reaction products initiates the polymerization of acrylonitrile (AN), but not the polymerizations of methyl methacrylate (MMA), styrene (St) or isoprene (IP). The active species of the solution initiating the polymerization of AN is assumed to be potassium benzene sulphenate from analyses of the solution and the infra-red spectrum of AN oligomers obtained using the complex. The DPSO-K (1/2) reaction products solution initiates the polymerization of MMA, St and IP as well as AN. The active species initiating the polymerization of MMA, St or IP is assumed to be phenylpotassium.     

The formation of clathrate-like hydrates of tetrabutylammonium halogenated carboxylates

The solid-liquid phase diagrams of binary mixtures of tetrabutylammonium halogenated carboxylates with water were examined in order to confirm the formation of clathrate-like hydrates. It was found that, among thirteen carboxylates examined, four carboxylates having CH₂FCOO^–, CHF₂COO^–, CF₃COO^–, and CH₂ClCOO^–, formed a hydrate with hydration numbers around 30 and seven carboxylates having CHCl₂COO^–, CCl₃COO^–, CH₂BrCOO^–, CHBr₂COO^–, CBr₃COO^–, CH₃CHClCOO^–, and CH₃CHBrCOO^– formed a hydrate with hydration numbers around 23. The latter hydrate has not been reported earlier. The melting points of these newly found hydrates were fairly high: they lie between 10 and 16°C. The effect of Cl and Br atoms attached to the carbon atom of the-position of a carboxylate anion both on the type of hydrate formed and on its stability was greatly different from that of a CH₃ group attached to the same position of the carboxylate anion.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.     

Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. IV. Mechanism of syndiotactic polymerization of butadiene with cobalt compounds–organoaluminum–CS2

A mechanism is proposed for the polymerization of syndiotactic 1,2-polybutadiene (s-PB) with soluble cobalt-organoaluminum-CS₂. The proposed active species have structures which consist of side-on coordination of CS₂ to cobalt, anti-π-allyl growing end, cisoid bidentate coordination of butadiene, and activation by complex formation with organoaluminum at the nonbonded sulfur of the coordinated CS₂. This proposal is based on findings for the aluminum-free catalyst Co(C₄H₆)(C₈H₁₃)-CS₂. It is tentatively interpreted that syndiotactic 1,2 polymerization proceeds under the influence of the side-on coordinated CS₂, by which the reactivity between the terminal carbons of butadiene and the C3 of the π-allyl end is enhanced.     

Decarboxylation of α-keto carboxylic acids by persulfoxide

Photosensitized oxygenation of diethyl sulfide in the presence of α-keto carboxylic acids caused oxidative decarboxylation of the acids by persulfoxide and gave carboxylic acids, carbon dioxide, diethyl sulfoxide and diethyl sulfone.     

Synthesis and spectroscopic analysis of tetraphenylporphyrinatoantimony(V) complexes linked to boron-dipyrrin chromophore on axial ligands

Tetraphenylporphyrinatoantimony(V) complexes, linked to boron-dipyrrin chromophores on axial ligands, were synthesized. The fluorescence spectra of 1a, 1b and 1c (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1a); 6-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]hexyloxo(methoxo)antimony(V) tetraphenylporphyrin bromide (1b); bis{3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo}antimony(V) tetraphenylporphyrin bromide (1c)) were analyzed under the excitations of N,N′-difluorobornyl-5-dipyrrinylphenyl (Bdpy) and tetraphenylporphyrinatoantimony(V) (Sb(TPP)) chromophores. Under the irradiation of Bdpy chromophore, the excitation energy was transferred from Bdpy chromophore to the Sb(TPP) moiety at 0.13–0.40 of the quantum yields, even in a polar solvent. On the other hand, the emission of Sb(TPP) chromophores was quenched by Bdpy chromophores at rate constants of 10⁸–10⁹ s⁻¹, independent of on the solvent polarity. Under the excitation of the Bdpy chromophore of 1d (3-[4-(N,N′-difluorobornyl-5-dipyrrinyl)phenyl]propoxo(phenyloxo)antimony(V) tetraphenylporphyrin bromide) involving both the Bdpy and the phenoxy chromophores on the axial ligands, the excited singlet state of the Sb(TPP) chromophore generated by the energy transfer from the Bdpy chromophore was quenched by the phenoxy ligand via non-radiative processes involving electron transfer. However, rapid back electron-transfer may occur because no absorption of the anion radical of Sb(TPP) was observed by nanosecond laser photolysis.     

Output and picosecond amplification characteristics of an efficient and high-power discharge excimer laser

Improvements in output pulse energy and efficiency of a conventional capacitor-transfer-type discharge excimer laser with automatic preionization have been achieved by extending the discharge volume and resulting moderate pumping of the active medium. The discharge laser produces a pulse energy of more than 1 J for XeCl, KrF, and ArF lasers in square beams of about 2×2 cm², and the maximum overall efficiency observed is 2.9% for XeCl, 3.2% for KrF and 1.8% for ArF. The laser device has been involved in a picosecond ( 32 ps) XeCl laser amplification system, and was operated as an amplifier at a repetitive frequency of 10 Hz. Saturation fluence for XeCl laser was measured to be 1.4 mJ/cm², and the picosecond pulse energy of 40 mJ was extracted from the amplifier.On leave from Ebara Corp., 6-6-7, Ginza, Chuo-ku, Tokyo 104, JapanOn leave from Mitsubishi Heavy Industries, LTD., 4-6-22, Kan-on shinmachi, Nishi-ku, Hiroshima 733, Japan