Comparison between preparative methodologies of nanostructured carbon nitride and their use as selective photocatalysts in water suspension

Carbon nitride photocatalysts have been prepared by different methodologies, such as chemical ultrasonic irradiation (sonochemical treatment), hydrothermal and ball milling and thermoexfoliation, and have been used for the selective oxidation of 5-hydroxymethyl-2-furaldehyde (HMF) to form 2,5-furandicarboxyaldehyde (FDC) in water suspension both under UV and natural solar irradiation. The physico-chemical features of the photocatalysts have been studied by X-ray diffraction, infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy, and specific surface area measurements. The results indicate that exfoliation of carbon nitrides can increase the conversion of HMF and the selectivity to FDC. In particular, samples exfoliated by both thermal and acidic ultrasonic irradiation treatments showed the best photocatalytic performance.     

Exogenous Sodium Nitroprusside Mitigates Salt Stress in Lentil (Lens culinaris Medik.) by Affecting the Growth,Yield, and Biochemical Properties

Soil salinity disrupts the physiological and biochemical processes of crop plants and ultimately leads to compromising future food security. Sodium nitroprusside (SNP), a contributor to nitric oxide (NO), holds the potential to alleviate abiotic stress effects and boost tolerance in plants, whereas less information is available on its role in salt-stressed lentils. We examined the effect of exogenously applied SNP on salt-stressed lentil plants by monitoring plant growth and yield-related attributes, biochemistry of enzymes (superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD)) amassing of leaf malondialdehyde (MDA) and hydrogen peroxide (H₂O₂). Salinity stress was induced by NaCl application at concentrations of 50 mM (moderate salinity) and 100 mM (severe salinity), while it was alleviated by SNP application at concentrations of 50 µM and 100 µM. Salinity stress severely inhibited the length of roots and shoots, the relative water content, and the chlorophyll content of the leaves, the number of branches, pods, seeds, seed yield, and biomass per plant. In addition, MDA, H₂O₂ as well as SOD, CAT, and POD activities were increased with increasing salinity levels. Plants supplemented with SNP (100 µM) showed a significant improvement in the growth- and yield-contributing parameters, especially in plants grown under moderate salinity (50 mM NaCl). Essentially, the application of 100 µM SNP remained effective to rescue lentil plants under moderate salinity by regulating plant growth and biochemical pathways. Thus, the exogenous application of SNP could be developed as a useful strategy for improving the performance of lentil plants in salinity-prone environments.     

Green Synthesis of CeO2 Nanoparticles from the Abelmoschus esculentus Extract: Evaluation of Antioxidant,Anticancer, Antibacterial,and Wound-Healing Activities

Metal oxide nanoparticles synthesized by the biological method represent the most recent research in nanotechnology. This study reports the rapid and ecofriendly approach for the synthesis of CeO₂ nanoparticles mediated using the Abelmoschus esculentus extract. The medicinal plant extract acts as both a reducing and stabilizing agent. The characterization of CeO₂ NPs was performed by scanning electron microscopy (SEM), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), and Fourier transform infrared spectroscopy (FTIR). The in vitro cytotoxicity of green synthesized CeO₂ was assessed against cervical cancerous cells (HeLa). The exposure of CeO₂ to HeLa cells at 10–125 µg/mL caused a loss in cellular viability against cervical cancerous cells in a dose-dependent manner. The antibacterial activity of the CeO₂ was assessed against S. aureus and K. pneumonia. A significant improvement in wound-healing progression was observed when cerium oxide nanoparticles were incorporated into the chitosan hydrogel membrane as a wound dressing.     

Molecularly Imprinted Polymers Combined with Electrochemical Sensors for Food Contaminants Analysis

Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Divalent manganese,cobalt, copper and cadmium complexes of (Z)‐N‐benzoyl‐N′‐(1H‐1,2,4‐triazol‐3‐yl)carbamimidothioic acid: Preparation,characterization, computational and biological studies

In this work, (Z)‐N‐benzoyl‐N′‐(1H‐1,2,4‐triazol‐3‐yl)carbamimidothioic acid and its Mn(II), Co(II), Cu(II) and Cd(II) complexes were introduced for the first time. This carbonyl thiourea ligand was prepared by the reaction of 1H‐1,2,4‐triazol‐3‐amine with benzoyl isothiocyanate. The structural elucidation of these compounds was performed using elemental analysis and spectral and magnetic measurements. Octahedral structures of all complexes, except Cd(II) complex with a tetrahedral geometry, were confirmed by applying DFT structural optimization. The thermal decomposition behaviour of metal complexes of carbonyl thiourea ligand is discussed. The calculation of kinetic parameters for prepared complexes (E_a, A, ΔH*, ΔS* and ΔG*) of all thermal degradation stages has been evaluated using two comparable approaches. Antimicrobial and ABTS‐antioxidant studies indicated potent activity of Cd(II) complex compared with the other investigated compounds. The cytotoxic activity of the prepared compounds was investigated in vitro. The results indicated potent activity of Mn(II) complex against both HePG2 (liver carcinoma) and MCF‐7 (breast carcinoma) cancer cells.     

3D Printable Geopolymer Composites Reinforced with Carbon-Based Nanomaterials – A Review

Three-dimensional (3D) geopolymer printing (3DGP) technology is a rapidly evolving digital fabrication method used in the construction industry. This technology offers significant benefits over 3D concrete printing in terms of energy saving and reduced carbon emissions, thus promoting sustainability. 3DGP technology is still evolving, and researchers are striving to develop high-performance printable materials and different methods to improve its robustness and efficiency. Carbon-based nanomaterials (CBNs) with beneficial properties have a wide range of applications in various fields, including as concrete/geopolymer systems in construction. This paper comprehensively reviews the research progress on carbon-based nanomaterials (CBNs) used to develop extrusion-based 3D geopolymer printing (3DGP) technology, including dispersion techniques, mixing methods, and the materials′ performance. The rheological, mechanical, durability, and other characteristics of these materials are also examined. Furthermore, the existing research limitations and the prospects of using 3DGP technology to produce high-quality composite mixtures are critically evaluated.     

Separation and purification of quinolyridine alkaloids from seeds of Thermopsis lanceolata R. Br. by conventional and pH-zone-refining counter-current chromatography

In this work, the preparative separation of quinolyridine alkaloids from seeds of T. lanceolata by conventional and pH-zone-refining counter-current chromatography. Traditional counter-current chromatography separation was performed by a flow-rate changing strategy with a solvent system of ethyl acetate-n-butanol-water (1:9:10, v/v) and 200 mg sample loading. Meanwhile, the pH-zone-refining mode was adopted for separating 2.0 g crude alkaloid extracts with the chloroform-methanol-water (4:3:3, v/v) solvent system using the stationary and mobile phases of 40 mM hydrochloric acid and 10 mM triethylamine. Finally, six compounds, including N-formylcytisine (two conformers) ( 1 ), N-acetycytisine (two conformers) ( 2 ), (-)-cytisine ( 3 ), 13-β-hydroxylthermopsine ( 4 ), N-methylcytisine ( 5 ), and thermopsine ( 6 ) were successfully obtained in the two counter-current chromatography modes with the purities over 96.5%. Moreover, we adopted nuclear magnetic resonance and mass spectrometry for structural characterization. Based on the obtained findings, the pH-zone-refining mode was the efficient method to separate quinolyridine alkaloids relative to the traditional mode.     

Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications – A Review

3D concrete printing (3DCP) is an emerging additive manufacturing technology in the construction industry. Its challenges lie in the development of high-performance printable materials and printing processes. Recently developed carbon-based nanomaterials (CBNs) such as graphene, graphene oxide, graphene nanoplatelets, and carbon nanotubes, have various applications due to their exceptional mechanical, chemical, thermal, and electrical characteristics. CBNs also have found potential applications as a concrete ingredient as they enhance the microstructure and modify concrete properties at the molecular level. This paper focuses on state-of-the-art studies on CBNs, 3DCP technology, and CBNs in conventional and 3D printable cement-based composites including CBN dispersion techniques, concrete mixing methods, and fresh and hardened properties of concrete. Furthermore, the current limitations and future perspectives of 3DCP using CBNs to produce high-quality composite mixtures are discussed.     

Some properties of the class of positive Dunford-Pettis operators

We characterize Banach lattices for which each positive Dunford-Pettis operator is M-weakly compact (resp. L-weakly compact) and we give some consequences.