Comparison of amine-induced cyclization of 6-chloro-1-hexynylphosphonate and isobutyl 7-chlorohept-2-ynoate

The reaction of 6-chloro-1-hexynylphosphonate with primary and secondary amines afforded exclusively 2-aminocyclohexenylphosphonates in 62-85% isolated yields. In contrast, reaction of various amines with isobutyl 7-chlorohept-2-ynoate in acetonitrile at 70 °C gave (E)-sec-butyl 2-(1-alkylpiperidin-2-ylidene)acetates in 65-78% isolated yields. Calculations offer an explanation for the difference in the behavior of the two compounds classes. It is shown that C-C cyclization in the alkyne-phosphonate group occurs via an initial formation of a zwitterionic intermediate, which is stabilized by both an inductive effect of the phosphonate group and a newly formed hydrogen bond. The alkyne-carboxylate group, on the other hand, proceeds via enamine formation as a result of the smaller inductive effect of the carboxylate combined with involvement of an allene-like resonance form. This resonance form both delocalizes the negative charge in the zwitterionic intermediate making it to be less available for attack, and affects the geometry thus preventing formation of the stabilizing hydrogen bond. Hence, the zwitterionic intermediate of the alkyne-carboxylates is less stable leading to formation of an enamine, which is followed by N-C cyclization to give the azaheterocycles.     

A flow pattern map for gas—liquid flow in horizontal pipes

Various flow pattern maps for two-phase gas—liquid flow in horizontal pipes are tested against the 5935 flow pattern observations presently contained in the UC Multiphase Pipe Flow Data Bank.A new flow regime correlation representing an extension of the work done by Govier and Aziz [3] is presented and is shown to be in better agreement with the data than the other correlations tested. A computer program for this correlation is included.It is also shown that there is no significant improvement obtained by including the effects of the physical properties of the fluids using any of the physical property parameters which have been proposed so far.     

Insights into metal borohydride and aluminohydride bonding: X-ray and neutron diffraction structures and a DFT and charge density study of [Na(15-crown-5)][EH(4)] (E = B, Al)

The neutron and X-ray structures of [Na(15-crown-5)][BH(4)] and [Na(15-crown-5)][AlH(4)], respectively, are reported, along with a topological analysis of their DFT-computed charge densities that explores the bonding between the anionic complex hydride [EH(4)](-) (E = B, Al) and the counterion [Na(15-crown-5)](+). In each case, the interaction is weak and mainly electrostatic in nature; however, notable differences are observed in the manner in which [BH(4)](-) and [AlH(4)](-) bind to the metal, which explains their different coordination modes. A range of unconventional E-H···H-C contacts is revealed to play an important role in the overall bonding and crystal packing of both complexes. These interactions can be classified as weak dihydrogen bonds based on the atoms in molecules approach.     

Electron affinities of biscyclopentadienyl and phospholyl uranium(IV) borohydride complexes: Experimental and DFT studies

Electron affinities (EAs) of a series of biscyclopentadienyl and phospholyl uranium(IV) complexes L₂U(BH₄)₂ [L₂ = Cp₂, (tmp)₂, (tBuCp)₂, (Cp*)(tmp) and Cp*₂] related to the U(III)/U(IV) redox system were calculated using relativistic Density Functional Theory (DFT) based methods coupled with the Conductor-like Screening Model for Real Solvents (COSMO-RS) approach. Electrochemical measurements of half-wave potentials in solution (tetrahydrofuran THF) were carried out for all these compounds under the same rigorous conditions. A good correlation (r² = 0.99) is obtained between the calculated EA values, at the ZORA/BP86/TZ2P level, and the half-wave reduction potentials measured by electrochemistry. The investigations bring to light the importance of spin-orbit coupling and solvent effect and the use of a large basis set in order to achieve such a good agreement between theory and experiment. The study confirms the instability of the Cp₂U(BH₄)₂ complex during the reduction process. The influence of the substituted aromatic ligand L₂, namely their electron donating ability, on EA was studied. The role of involved orbitals (singled occupied molecular orbital –SOMO– of anionic species or lowest unoccupied molecular orbital –LUMO– of neutral species) in the redox process was revealed.     

Selective ion exchange separation of uranium from concomitant impurities in uranium materials and subsequent determination of the impurities by ICP-OES

An ion exchange method has been developed for the separation of uranium from trace level metallic impurities prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES) in uranium materials. Selective separation of uranium from trace level metallic impurities consisting Cr, Co, Cu, Fe, Mn, Cd, Gd, Dy, Ni, and Ca was achieved on anion exchange resin Dowex 1 × 8 in sulphate medium. The resin (100–200 mesh, in chloride form) was packed in a small Teflon column (7.8 cm × 0.8 cm I.D.) and brought into sulphate form by passing 0.2 N ammonium sulphate solution. Optimum experimental conditions including pH and concentration of sulphate in the liquid phase were investigated for the effective uptake of uranium by the column. Uranium was selectively retained on the column as anionic complex with sulphate, while impurities were passed through the column. Post column solution was collected and analyzed by ICP-OES for the determination of metallic impurities. Up to 2,500 μg/mL of uranium was retained with >99% efficiency after passing 25 mL sample through the column at pH 3. Percentage recoveries obtained for most of the metallic impurities were >95% with relative standard deviations <5%. The method established was applied for the determination of gadolinium in urania–gadolinia (UO₂–Gd₂O₃) ceramic nuclear fuel and excellent results were achieved. Solvent extraction method using tributylphosphate (TBP) as extractant was also applied for the separation of uranium in urania–gadolinia nuclear fuel samples prior to the determination of gadolinium by ICP-OES. The results obtained with the present method were found very comparable with those of the solvent extraction method.     

The effect of anti-reflection coating of porous silicon on solar cells efficiency

Anti-reflection coatings of solar cells have been fabricated using different techniques. The techniques used include SiO₂ thermal oxidation, ZnO/TiO₂ sputtering deposition and porous silicon prepared by electrochemical etching. Surface morphology and structural properties of solar cells were investigated by using scanning electron microscopy and atomic forces microscopy. Optical reflectance was obtained by using optical reflectometer. I-V characterizations were studied under 80 mW/cm² illumination conditions. Porous silicon was found to be an excellent anti-reflection coating against incident light when it is compared with another anti-reflection coating and exhibited good light-trapping of a wide wavelength spectrum which produced high efficiency solar cells.     

Cardiac magnetic resonance imaging: infarct size is an independent predictor of mortality in patients with coronary artery disease

Background

Cardiac magnetic resonance imaging (CMR) can accurately determine infarct size. Prior studies using indirect methods to assess infarct size have shown that patients with larger myocardial infarctions have a worse prognosis than those with smaller myocardial infarctions.

Objectives

This study assessed the prognostic significance of infarct size determined by CMR.

Methods

Cine and contrast CMR were performed in 100 patients with coronary artery disease (CAD) undergoing routine cardiac evaluation. Infarct size was determined by planimetry. We used Cox proportional hazards regression analyses (stepwise forward selection approach) to evaluate the risk of all-cause death associated with traditional cardiovascular risk factors, symptoms of heart failure, medication use, left ventricular ejection fraction, left ventricular mass, angiographic severity of CAD and extent of infarct size determined by CMR.

Results

Ninety-one patients had evidence of myocardial infarction by CMR. Mean follow-up was 4.8±1.6 years after CMR, during which time 30 patients died. The significant multivariable predictors of all-cause mortality were extent of myocardial infarction by CMR, extent of left ventricular systolic dysfunction, symptoms of heart failure, and diabetes mellitus (P<.05). The presence of infarct greater than or equal to 24% of left ventricular mass and left ventricular ejection fraction less than or equal to 30% were the most optimal cut-off points for the prediction of death with bivariate adjusted hazard ratios of 2.11 (95% confidence interval 1.02-4.38) and 4.06 (95% confidence interval 1.73-9.54), respectively.

Conclusions

The extent of myocardial infarction determined by CMR is an independent predictor of death in patients with CAD.     

Effect of iridium loading on HZSM-5 for isomerization of n-heptane

The effect of iridium loading on the properties and catalytic isomerization of n-heptane over Ir-HZSM-5 is studied. Ir-HZSM-5 was prepared by impregnation method and subjected to isomerization process in the presence of flowing hydrogen gas. XRD and BET studies show that the presence of iridium stabilizes the crystalline structure of HZSM-5, leading to more ordered framework structure and larger surface area. TGA and FTIR results substantiate that iridium species interacts with OH group on the surface of HZSM-5. Pyridine FT-IR study verifies the interaction between iridium and surface OH group slightly increased the Bro¨nsted and Lewis acid sites without changing the lattice structure of HZSM-5. The presence of iridium and the increase of strong Lewis acid sites on HZSM-5 were found to bring an increase about 4.1%, 33.2% and 11.8% in conversion, selectivity and yield of n-heptane isomerization, respectively.     

Separation of Co(II) from dilute aqueous solutions by precipitate and adsorbing colloid flotation

Ion, precipitate and adsorbing colloid flotation of cobalt(II) have been investigated at different pH values, using N-dodecylpyridinium chloride (DPCl), A strong cationic surfactant, and sodium lauryl sulfate (NaLS), a strong anionic surfactant, as collectors. In case of adsorbing colloid flotation, hydrous manganese dioxide was used as an adsorbent. The precipitate flotation curves experimentally obtained with the two tested collectors were compared with the corresponding theoretical one calculated from the data published for Co(II) hydrolysis. The effects of the collector concentration, ageing of the water-MnO₂–Co(II) system, bubbling time period, cobalt(II) concentration and foreign salts on the percent removal of Co(II) by adsorbing colloid flotation using DPCl as collector were determined. Removals approaching 100% could be achieved under the optimum conditions.