Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

利用选择性激发核磁共振对混合物中的两种化合物进行结构解析

利用现代NMR的1D、2D技术对一个混合物进行了分析。结果表明：混合物由两种化合物组成。为了同时准确确定两种化合物的结构，本工作应用了1D-TOCSY技术，利用该技术选择性强的特点来补充常规的1D、2DHMR实验所提供的分子结构的信息。在没有进行预分离的条件下，顺利地完成了样品中两种化合物的核磁信号归属，并最终确定了它们的结构。     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.     

氮化铁催化剂的制备及其苯胺催化加氢性能

用α－Ｆｅ２Ｏ３与氨气程序升温还原方法制备出不同温度氮气的氮化铁系列催化剂。通过ＸＲＤ测试对氮化过程中的晶相转变进行了分析。在中压反应装置上考察了氮化铁系列催化剂上苯胺加氢活性以及反应条件对苯胺加氢反应活性的影响。结果表明，在７００℃氮化制香的氮化铁催化剂显示有较高的苯胺加氢活性，在氢压为３．０ＭＰａ，温度为２５０℃，ｎ（Ｈ２）／ｎ（ｏｉｌ）＝１８，液体空速（ＷＨＳＶ）为０．３ｈ＾－１时，该催化剂     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

Determination of trace scandium by ion-exchanger phase spectrophotometry withp-nitrochlorophosphonazo

Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 10⁵ 1 mol^–1 cm^–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。