Comparison Between Surface and Near-Surface Residual Stress Measurement Techniques Using a Standard Four-Point-Bend Specimen

Background

Determination of near-surface residual stresses is challenging for the available measurement techniques due to their limitations. These are often either beyond reach or associated with significant uncertainties.

Objective

This study describes a critical comparison between three methods of surface and near-surface residual stress measurements, including x-ray diffraction (XRD) and two incremental central hole-drilling techniques one based on strain-gauge rosette and the other based on electronic speckle pattern interferometry (ESPI).

Methods

These measurements were performed on standard four-point-bend beams of steel loaded to known nominal stresses, according to the ASTM standard. These were to evaluate the sensitivity of different techniques to the variation in the nominal stress, and their associated uncertainties.

Results

The XRD data showed very good correlations with the surface nominal stress, and with superb repeatability and small uncertainties. The results of the ESPI based hole-drilling technique were also in a good agreement with the XRD data and the expected nominal stress. However, those obtained by the strain gauge rosette based hole-drilling technique were not matching well with the data obtained by the other techniques nor with the nominal stress. This was found to be due to the generation of extensive compressive residual stress during surface preparation for strain gauge installation.

Conclusion

The ESPI method is proven to be the most suitable hole-drilling technique for measuring near-surface residual stresses within distances close to the surface that are beyond the penetration depth of x-ray and below the resolution of the strain gauge rosette based hole-drilling method.

     

Preparation of novel symmetrical bistetrazole-carbazole derivatives through a one-pot Ugi-azide reaction

A series of new symmetrical tetrazole-based carbazole derivatives starting from the initially generated 3,6-diformyl-N-alkylcarbazoles were successfully synthesized through a one-pot Ugi-azide reaction in moderate to high yields. Simplicity, easily accessible chemicals, mild reaction conditions, and fast separation of the products with the formation of bistetrazole-based carbazole derivatives in one step are some advantages of this method. The structure of the products was characterized and confirmed by using spectroscopic techniques such as ¹H NMR, ¹³C NMR, FT-IR, and MS spectroscopy.     

Exceedingly Facile PhX Activation (X=Cl,Br, I) with Ruthenium(II): Arresting Kinetics,Autocatalysis, and Mechanisms

[(Ph₃P)₃Ru(L)(H)₂] (where L=H₂ ( 1 ) in the presence of styrene, Ph₃P ( 3 ), and N₂ ( 4 )) cleave the Ph? X bond (X=Cl, Br, I) at RT to give [(Ph₃P)₃RuH(X)] ( 2 ) and PhH. A combined experimental and DFT study points to [(Ph₃P)₃Ru(H)₂] as the reactive species generated upon spontaneous loss of L from 3 and 4 . The reaction of 3 with excess PhI displays striking kinetics which initially appears zeroth order in Ru. However mechanistic studies reveal that this is due to autocatalysis comprising two factors: 1) complex 2 , originating from the initial PhI activation with 3 , is roughly as reactive toward PhI as 3 itself; and 2) the Ph? I bond cleavage with the just‐produced 2 gives rise to [(Ph₃P)₂RuI₂], which quickly comproportionates with the still‐present 3 to recover 2 . Both the initial and onward activation reactions involve PPh₃ dissociation, PhI coordination to Ru through I, rearrangement to a η²‐PhI intermediate, and Ph? I oxidative addition.     

Removal, preconcentration and spectrophotometric determination of U(VI) from water samples using modified maghemite nanoparticles

Arsenazo III modified maghemite nanoparticles (A-MMNPs) was used for removing and preconcentration of U(VI) from aqueous samples. The effects of contact time, amount of adsorbent, pH and competitive ions was investigated. The experimental results were fitted to the Langmuir adsorption model in the studied concentration range of uranium (1.0 × 10^?4–1.0 × 10^?2 mol L^?1). According to the results obtained by Langmuir equation, the maximum adsorption capacity for the adsorption of U(VI) on A-MMNPs was 285 mg g^?1 at pH 7. The adsorbed uranium on the A-MMNPs was then desorbed by 0.5 mol L^?1 NaOH solution and determined spectrophotometrically. A preconcentration factor of 400 was achieved in this method. The calibration graph was linear in the range 0.04–2.4 ng mL^?1 (1.0 × 10^?10–1.0 × 10^?8 mol L^?1) of U(VI) with a correlation coefficient of 0.997. The detection limit of the method for determination of U(VI) was 0.01 ng mL^?1 and the relative standard deviation (R.S.D.) for the determination of 1.43 and 2.38 ng mL^?1 of U(VI) was 3.62% and 1.17% (n = 5), respectively. The method was applied to the determination of U(VI) in water samples.     

Adsorption isotherms and ideal selectivities of hydrogen sulfide and carbon dioxide over methane for the Si-CHA zeolite: comparison of carbon dioxide and methane adsorption with the all-silica DD3R zeolite

Adsorption isotherms of H₂S, CO₂, and CH₄ on the Si-CHA zeolite were measured over pressure range of 0–190 kPa and temperatures of 298, 323, and 348 K. Acid gases adsorption isotherms on this type of zeolite are reported for the first time. The isotherms follow a typical Type-I shape according to the Brunauer classification. Both Langmuir and Toth isotherms describe well the adsorption isotherms of methane and acid gases over the experimental conditions tested. At room temperature and pressure of 100 kPa, the amount of CO₂ adsorption for Si-CHA zeolite is 29 % greater than that reported elsewhere (van den Bergh et al. J Mem Sci 316:35–45 (2008); Surf Sci Catal 170:1021–1027 (2007)) for the pure silica DD3R zeolite while the amounts of CH₄ adsorption are reasonably the same. Si-CHA zeolite showed high ideal selectivities for acid gases over methane at 100 kPa (6.15 for H₂S and 4.06 for CO₂ at 298 K). Furthermore, H₂S adsorption mechanism was found to be physical, and hence, Si-CHA can be utilized in pressure swing adsorption processes. Due to higher amount of carbon dioxide adsorbed and lower heats of adsorption as well as three dimensional channels of Si-CHA pore structure, this zeolite can remove acid gases from methane in a kinetic based process such as zeolite membrane.     

Rational design of inhibitors against LpxA protein of Acinetobacter baumannii using a virtual screening method

BackgroundAcinetobacter baumannii is a highly antimicrobial resistant nosocomial pathogen. Resistance to currently used antibiotics has limited effective drugs against this bacterium. This study aimed to propose a rational inhibitor design against the LpxA protein of A. baumannii using a virtual screening method based on a similar structure of ligands.MethodsIn this study, we targeted LpxA protein, which is involved in the early stage of LPS biosynthesis. In the next step, we used Peptide920 and 1,2- Ethanediol as templates to find similar compounds using Drugbank and Zinc15 webservers, respectively. Subsequently, molecular dynamics (MD) simulations were carried out for LpxA protein and two complexes of ZINC895081 and Macrolactam-1 which represented the highest binding affinity and best conformation. Finally, ADMET properties, water solubility and drug-likeness of the desired compounds were evaluated using SwissADME and DruLiTo softwares.ResultsAccording to considered criteria, Drugbank suggested 5 compunds including Ilomastat, Macrolactam-1, Macrolactam-2, Macimorelin, and Oglufanide. On the other hand, Zinc15 webserver suggested 4 compunds including ZINC895048, ZINC895081, ZINC901061 and ZINC1531008. The result of the HDOCK server and Molegro virtual docker (MVD) showed that Macrolactam-1 and ZINC895081 (Citrate) had the highest docking score. In addition, MD simulations showed that ZINC895081 and Macrolactam-1 ligands have the stable binding to the LpxA protein. According to Lipinski's rule, these two compounds are non-carcinogenic, non-toxic and promising inhibitors against LpxA of A. baumannii.ConclusionIt seems that Macrolactam-1 and ZINC895081 (Citrate) are two valuable promising inhibitors against the LpxA protein of A. baumannii. Further in vitro and in vivo experiments are needed to confirm the capabilities of these proposed compounds against A. baumannii.     

Sustainable and green microextraction of organophosphorus flame retardants by a novel phosphonium‐based deep eutectic solvent

Based on the solidification of a hydrophobic deep eutectic solvent in air‐assisted liquid phase microextraction combined with gas chromatography and mass spectrometry, a green and sustainable microextraction technique was developed for extracting, separating, and detecting organophosphorus flame retardants in aqueous samples. In this study, some strategies were considered for overcoming or improving the challenges of conventional solvent microextraction procedures. In addition, a hydrophobic deep eutectic solvent with a freezing point near the ambient temperature was employed as an extraction phase, the dispersive solvent was substituted by the syringe pump process, and the centrifugation step was omitted by using salting‐out phenomenon. Further, the effect of the main independent variables was evaluated by using the chemometric methods in order to maximize the extraction efficiency of the procedure. Under optimal conditions, the calibration model was linear in the range of 0.01–25.0 µg/L. Limits of detection and quantitation were assessed at the concentration levels of 2–23 and 9–65 ng/L, respectively. The precision involving repeatability and reproducibility was evaluated by estimating the relative standard deviation, the levels of which were <6.6 and <8.7%, respectively. The applicability of the method was successfully evaluated by analyzing the target analytes in real aqueous samples, which illustrated satisfactory recoveries (95–104.61%).     

Synthesis of poly(2‐hydroxyethyl methacrylate)‐based molecularly imprinted polymer nanoparticles containing timolol maleate: morphological,thermal, and drug release along with cell biocompatibility studies

This work was aimed to synthesize and characterize poly(2‐hydroxyethyl methacrylate) [poly (HEMA)]‐based molecularly imprinted polymer nanoparticles (MIP NPs) containing timolol maleate (TM) via precipitation polymerization. The molecular structures of the MIP and non‐imprinted polymer (NIP) NPs were compared by means of Fourier transform infrared spectroscopy. The morphological observations by using scanning electron microscopy and transmission electron microscopy confirmed the formation of MIP NPs as small as 128 nm in average diameter with appropriate synthesis conditions. Thermal behaviors of the samples were also studied by the use of thermogravimetric analysis and differential scanning calorimetry. By considering a series of key factors such as monomer : template ratio, cross‐linker type, pH, and temperature, the sample with promising characteristics was found to be that of HEMA : TM ratio of 10:1, 40 mmol of ethylene glycol dimethacrylate as cross‐linker, and polymerization temperature of 60°C in acetonitrile as porogenic solvent. Furthermore, the ultraviolet‐visible (UV‐vis) spectrophotometry results proved a controlled release of TM from the MIP NP samples compared with NIP ones at extended periods. Moreover, the cytotoxicity of the MIP and NIP NPs samples was evaluated on mesenchymal stem cells, and the obtained observations showed that they had no adverse side effect on the living cells; especially the surface of the MIP NPs sample depicted highly cell's biocompatibility. Finally, the outcomes from designed different experiments conducted us that the HEMA‐based MIP NPs have great potential as an ocular nanocarrier for TM delivery. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of three Cd(II) Schiff-base macrocyclic N3O2 complexes

Three polyamine ligands of N1-(2-nitrobenzyl)-N1-(2-aminoethyl)ethane-1,2-diamine (L₁), N1-(2-nitrobenzyl)-N1-(2-aminoethyl)propane-1,3-diamine (L₂) and N1-(2-nitrobenzyl)-N1-(3-aminopropyl)propane-1,3-diamine (L₃) were synthesized and their cyclocondensation with 2-[2-(2-formyl phenoxy)ethoxy]benzaldehyde (L₄) in the presence of various metal(II) ions was examined. These reactions only in the presence of a stoichiometric amount of cadmium(II) nitrate gave the related cadmium(II) macrocyclic Schiff-base complexes. In all the other cases no cyclic complexes have been obtained and metal(II) polyamines were the only products. The complexes have been studied with IR, ¹H NMR, ¹³C NMR, DEPT, COSY, HMQC and microanalysis. The crystal structures of [Cd(NO₃)(L₅)(μ-NO₃)Cd(NO₃)(L₅)]0.5Cd(NO₃)₄ (1) and [CdL₅(NO₃)(CH₃OH)]ClO₄ (2) have been also determined.