High-Performance Thin-Layer Chromatographic Method for the Estimation of Benzyl Isothiocyanate in Salvadora persica Root Extract and Dental Care Herbal Products

JPC – Journal of Planar Chromatography – Modern TLC - A novel, simple, and sensitive high-performance thin-layer chromatography (HPTLC) method has been successfully developed and...     

Performance improvement of PDMS/PES membrane by adding silicalite-1 nanoparticles: separation of xenon and krypton

The polydimethylsiloxane (PDMS) mixed matrix membrane with dispersed phase of nanozeolite silicalite-1 has been synthesized on polyethersulphone (PES) as a support, and its performance in the gas separation of xenon and krypton has been studied. For this purpose, nanozeolite silicalite-1 is synthesized by the hydrothermal clear solution method and is characterized by XRD and SEM analysis. In this research, the separation performance of MMM has also been compared with the polymeric PDMS membrane. Furthermore, the effect of feed pressure and loading percentage of nanozeolite in the polymeric matrix are evaluated. The results indicate that the addition of nanozeolite to the polymeric matrix improves its separation performance, and that the changes of the feed pressure have no major effect. The average permeability of the krypton and xenon gases through the PDMS polymeric membrane is calculated as 1.25 × 10^?9 and 1.78 × 10^?9 cm mol/(cm² s kPa), respectively, while by adding only 5 wt% of nanosilicalite-1 to the polymeric matrix of the membrane, this amount increased to 1.82 × 10^?9 and 8.07 × 10^?9 cm mol/(cm² s kPa), respectively. In addition, the presence of nanosilicalite-1 as the filler leads to an increase in the selectivity of xenon to krypton up to 4.38.     

Analytical solution of three-dimensional Navier–Stokes equations for the flow near an infinite rotating disk

In this letter, we will consider variational iteration method (VIM) and Padé approximant, for finding analytical solutions of three-dimensional viscous flow near an infinite rotating disk. The solutions is compared with the numerical (fourth-order Runge–Kutta) solution. The results illustrate that VIM–Padé is an appropriate method in solving the systems of nonlinear equations. It is predicted that VIM–Padé can have wide application in engineering problems (especially for boundary-layer and natural convection problems).     

Addition Reaction Between Trimethyl Phosphite and Dibenzoylacetylene in the Presence of SH- or NH-Acids

The reactive 1:1 intermediate produced in the addition reaction between trimethyl-phosphite and dibenzoylacetylene was trapped by SH- or NH-acids such as 4-nitroimidazole, 4-methyl-5-nitroimidazole, succinimide, or mercaptoacetic acid to produce 2-substituted 1,4-diphenylbutane-1,4-diones.     

Determination of Trichloroacetic Acid (TCAA) Using CdO Nanoparticles Modified Carbon Paste Electrode

In this paper, the electrochemical behavior of a carbon paste electrode modified with CdO nanoparticles as a potential electrocatalyst for the reduction of trichloroacetic acid (TCAA) was investigated using cyclic voltammetry and double‐potential step chronoamperometry. The modified electrode showed a great enhancement in cathodic peak current with respect to reduction of TCAA in acidic aqueous solution. Using this increment, a quantitative method was developed for the determination of TCAA in aqueous solution. The detection limit and linear dynamic range of TCAA are 2.3×10^?6 M and 2.3×10^?4–3×10^?6 M, respectively.     

Theoretical studies on tautomerism of imidazole-2-selenone

The tautomerism of all possible forms of imidazole selenone (ISe1–ISe6), induced by proton transfer was studied theoretically in different environments including gas phase, continuum solvent, and microhydrated environment with one explicit water molecule. The calculations were performed at the MP2 and CAM-B3LYP levels of theory, separately. It was found that the imidazole selenone, in the form of ISe3, is the most stable isomer in both gas phase and solvent. The activation energy for conversion of ISe3 to imidazole selenol (ISe6), as the second stable form, is 41.72 and 43.0 kcal/mol in the gas phase and water, respectively. The infrared spectral frequencies as well as the vibrational frequency shifts were reported and assigned to their corresponding vibrational modes. In addition, the variation of dipole moments and charges on the atoms with change of solvent was studied. The energies of HOMO, LUMO, and HOMO–LUMO gap were calculated in both gas phase and solvent. Specific solvent effects with addition of water molecule near the electrophilic centers of tautomers and the transition states of proton transfer, assisted by water molecule, were investigated. It was found that the water molecule can form different hydrogen bonds with the molecule. Aggregation of the isomers with water molecule does not change the order of stability of isomers, but proton transfer reaction assisted by a water molecule needs less energy than when the proton shifts through the intramolecular process.     

Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd,Cu and Hg ions in water and some foodstuff samples

A new chemically modified carbon paste electrode was constructed and used for rapid, simple, accurate, selective and highly sensitive simultaneous determination of cadmium, copper and mercury using square wave anodic stripping voltammetry (SWASV). The carbon paste electrode was modified by N,N′-bis(3-(2-thenylidenimino)propyl)piperazine coated silica nanoparticles. Compared with carbon paste electrode, the stripping peak currents had a significant increase at the modified electrode. Under the optimized conditions (deposition potential, −1.100 V vs. Ag/AgCl; deposition time, 60 s; resting time, 10 s; SW frequency, 25 Hz; pulse amplitude, 0.15 V; dc voltage step height, 4.4 mV), the detection limit was 0.3, 0.1 and 0.05 ng mL⁻¹ for the determination of Cd²⁺, Cu²⁺ and Hg²⁺, respectively. The complexation reaction of the ligand with several metal cations in methanol was studied and the stability constants of the complexes were obtained. The effects of different cations and anions on the simultaneous determination of metal ions were studied and it was found that the electrode is highly selective for the simultaneous determination of Cd²⁺, Cu²⁺ and Hg²⁺. Furthermore, the present method was applied to the determination of Cd²⁺, Cu²⁺ and Hg²⁺ in water and some foodstuff samples.