Preparation of conducting poly(vinyl chloride)/polyindole composites and freestanding films via chemical polymerization

This study covers the synthesis of conducting polyindole (PIN) homopolymer, poly(vinyl chloride)/polyindole (PVC/PIN) composites, and preparation of their freestanding films. PIN and composites were synthesized chemically by radicalic mechanism using FeCl₃ as an initiator. Films of PVC and PVC/PIN composites were prepared by casting on glass Petri dishes. Mechanical properties of films were examined by stress–strain experiments. From FTIR spectra of polymers, it was revealed that polymerization reaction occurred by 2–3 mechanism. The conductivities of polymers at different temperatures were also measured by four‐probe technique and found in the range 10^?4 to 10^?5 S cm^?1. Magnetic properties of the polymers were analyzed by Gouy scale measurements and were found that their conducting mechanisms are of polaron and bipolaron natures. Thermal properties of polymers were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) and found that they had shown adequate thermal stability. X‐ray diffraction (XRD) spectra showed the amorphous nature of the polymers. Scanning electron microscopy (SEM) was used for microstructural analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1290–1298, 2010     

On the Convergence and Iterates of q-Bernstein Polynomials

The convergence properties of q-Bernstein polynomials are investigated. When q1 is fixed the generalized Bernstein polynomials _nf of f, a one parameter family of Bernstein polynomials, converge to f as n→∞ if f is a polynomial. It is proved that, if the parameter 0<q<1 is fixed, then _nf→f if and only if f is linear. The iterates of _nf are also considered. It is shown that _n^Mf converges to the linear interpolating polynomial for f at the endpoints of [0,1], for any fixed q>0, as the number of iterates M→∞. Moreover, the iterates of the Boolean sum of _nf converge to the interpolating polynomial for f at n+1 geometrically spaced nodes on [0,1].     

Crystal and Molecular Structure of <Emphasis Type="Italic">N</Emphasis>-(Phenylthio)phthalimide

The title compound N-(Phenylthio)phthalimide has been synthesized and characterized by FT-IR, NMR, and X-ray single-crystal determination. The compound crystallizes in the triclinic sp. gr. \(P\bar 1\) with Z = 2. The title compound is not planar. The dihedral angle between the phthalimide and phenyl ring systems is 77.41(8)°. The crystal structure is stabilized by intermolecular π...π and C–H...π interactions.     

Synthesis of novel C2-symmetric chiral crown ethers and investigation of their enantiomeric recognition properties

A series of new C₂-symmetric chiral aza crown ether macrocycles 1–4 have been synthesized from (S)-3-aryloxy-1,2-propanediol and (S)-1,2-propanediol for the enantiomeric recognition of amino acid ester derivatives. These new macrocycles have been shown to be strong complexing agents for primary organic ammonium salts (with K up to 176.93 M^?1 and ΔG° up to 12.81 kJ mol^?1) by ¹H NMR titration. These macrocyclic host exhibited enantioselective bonding toward the d-enantiomer of phenylalanine methyl ester hydrochloride with K_D/K_L up to 6.87 in CDCl₃ with 0.25% CD₃OD.     

Phase transitions and generalized motion by mean curvature

We study the limiting behavior of solutions to appropriately rescaled versions of the Allen-Cahn equation, a simplified model for dynamic phase transitions. We rigorously establish the existence in the limit of a phase-antiphase interface evolving according to mean curvature motion. This assertion is valid for all positive time, the motion interpreted in the generalized sense of Evans-Spruck and Chen-Giga-Goto after the onset of geometric singularities.     

A molecular dynamics study on iridium

In this study, molecular dynamics simulations are performed by using a modified form of Morse potential function in the framework of the Embedded Atom Method (EAM). Temperature-and pressure-dependent behaviours of bulk modulus, second-order elastic constants (SOEC), and the linear-thermal expansion coefficient is calculated and compared with the available experimental data. The melting temperature is estimated from 3 different plots. The obtained results are in agreement with the available experimental findings for iridium.      

Improvement of cycling stability of LiMn2O4 cathode by Fe2O3 surface modification for Li-ion battery

The surface of spinel LiMn₂O₄ was modified with Fe₂O₃ (1.0, 2.0, 3.0, 4.0, and 5.0 wt%) by a simple sol-gel method to improve its electrochemical performance at room temperature. Compared with bare LiMn₂O₄, surface modification improved cycling stability of the material. Among the surface-modified cathode materials, the 3.0- and 4.0-wt% surface-modified cathodes have lesser capacity loss than the others. While the bare LiMn₂O₄ showed 25.4 % capacity loss in 70 cycles at room temperature, 3.0 and 4.0 wt% of Fe₂O₃-modified LiMn₂O₄ only exhibited the capacity loss of 2.6 and 2.3 % in 70 cycles at room temperature, respectively. The structure and phase were identified with X-ray diffractometer along with the lattice constant calculated by a Win-Metric program.     

Partially coherent Airy beam and its propagation in turbulent media

The properties of partially coherent Airy beam propagating in turbulent media are investigated. Firstly the variations in the intensity profile and the location of the Airy beam peak with respect to dislocation and width parameters are examined. On the source plane, it is shown that there is a threshold value of the dislocation parameter which determines whether the beam peak will lie on the negative or positive side of the axis. The changes in source beam power and source beam size with respect to dislocation and width parameters are also examined. Then analysis is made for partially coherent Airy beam propagating in turbulence against variations in propagation distance, dislocation and width parameters, structure constant and partial coherence. It is found that the peak of the Airy beam will always shift to the right for increasing propagation distance. But this shift will become less as the dislocation and width parameters are increased. Finally it is shown that higher levels of turbulence and partial coherence will lead to more spreading and shift the beam peak more toward the on-axis position.