Ag(I) complexes with alkylidene-bis(2-aminopyrimidines) as building units for discrete metallomacrocyclic frames. A structural and solution study

Alkylidene-bis(2-aminopyrimidines) (pyr2Cx, x = 2-5) are useful ligands to interact with Ag(I) yielding discrete metallocycles. Crystal structures of the [(pyr2C2)Ag(NO3)]2 and [(H-pyr2C4)Ag(NO3)2]2 have been isolated where each macrocyclic moiety interacts with their surroundings through weak interactions, yielding 3D discrete structures, On the other hand, the solution study shows that the equilibrium constants for the formation of Ag(pyr2Cx)+ complexes are higher than the literature values for Ag(I) complexes with single pyrimidines, although the differences could be explained by invoking the solid-state structures of the Ag(I)-pyr2Cx complexes.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Co(II)5(OH)6(SO4)2(H2O)4: the first ferromagnet based on a layered cobalt-hydroxide pillared by inorganic...OSO3-Co(H2O)4-O3SO..

The synthetic mineral Co(II)5(OH)6(SO4)2(H2O)4 (1), obtained by hydrothermal reaction of CoSO4.7H2O and NaOH at 165 degrees C and consisting of brucite-like Co4(OH)6O2 layers pillared by OSO3-Co(H2O)4-O3SO, is a ferromagnet (T(Curie)= 12 K, Hc= 580 Oe).     

Improvement in steroid screening for doping control with special emphasis on stanozolol

The Medical Commission of the International Olympic Committee forbids the use of anabolic androgenic steroids and beta2-agonists to improve athletic performance. In this work we have selected examples of anabolic androgenic compounds and their metabolites to evaluate the GC-MS analysis of some trimethylsilyl derivatives. The aim is to set the best GC conditions to improve the detection within the whole range of analyte elution temperatures. The initial column temperature was changed to 105 or 140 degrees C followed by 40 degrees C min(-1) to 200 degrees C and then 15 degrees C min(-1) to 300 degrees C. Using 140 degrees C as the initial oven temperature it was possible to obtain narrower initial analyte distributions for the compounds that elutes at the beginning of the chromatogram as clenbuterol, mabuterol, epimethylenediol and norandrosterone, without loss of derivatized metabolites signal. Later. eluting analytes, such as the stanozolol metabolites, furazabol and oxandrolone were not affected. Temperatures below 140 degrees C. resulted in partial derivatization for some analytes mainly stanozolol related structures. Therefore evaluation of derivatization conditions as occurring in three steps, the vial, vaporization chamber and capillary column, was thoroughly assessed. The new program temperature improves the signal-to-noise ratio for some compounds and shows adequate resolution for endogenous compounds. Some of the difficult key separations necessary for doping control enforcement were also obtained with the proposed method.     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.     

Solution conformation by NMR and molecular modeling of three sulfide-free somatostatin octapeptide analogs compared to angiopeptin

Summary The conformation in dimethylsulfoxide of the somatostatin derivative angiopeptin and of three disulfide-free analogs was estimated by two-dimensional nuclear magnetic resonance spectroscopy at room temperature. The resulting 3D molecular graphics were compared and shown to reflect the observed differences in the inhibition of restenosis after rat aorta balloon injury by these octapeptide inhibitors. Angiopeptin and its active analog 2 displayed a relatively rigid conformation of the cyclic hexapeptide backbone due to the presence of two well-defined hydrogen bonds, further stabilized by a third hydrogen bond outside the ring. No such constraints were detected for the two biologically inactive analogs, which, compared to 2, had a two-atom longer or shorter hexapeptide ring. The well-defined structure of compound 2 may serve as an improved pharmacophore for this new class of drugs.     

Study of the ternary system FeCrTe around the composition FeCr2Te4

The system FeCrTe was investigated around the composition FeCr₂Te₄. FeCr₂Te₄ is a metastable compound. Single crystals with Fe_0·93Cr_1·76Te₄ composition were grown by vapor transport or the Bridgman method. These crystals are metallic and anisotropic ferromagnets.     

A note on packing paths in planar graphs

Seymour (1981) proved that the cut criterion is necessary and sufficient for the solvability of the edge-disjoint paths problem when the union of the supply graph and the demand graph is planar and Eulerian. When only planarity is required, Middendorf and Pfeiffer (1993) proved the problem to be NP-complete. For this case, Korach and Penn (1992) proved that the cut criterion is sufficient for the existence of a near-complete packing of paths. Here we generalize this result by showing how a natural strengthening of the cut criterion yields better packings of paths.Analogously to Seymour's approach, we actually prove a theorem on packing cuts in an arbitrary graph and then the planar edge-disjoint paths case is obtained by planar dualization. The main result is derived from a theorem of Seb (1990) on the structure of ±1 weightings of a bipartite graph with no negative circuits.Research partially supported by the Hungarian National Foundation for Scientific Research Grants OTKA 2118 and 4271.     

Spectra of graphs and fractal dimensions II

This paper continues the study of exponentsd(x), d (x), d _R (x) andd (x) for graphG; and the nearest neighbor random walk {X _n } _nN onG, if the starting pointX ₀=x is fixed. These exponents are responsible for the geometric, resistance, diffusion and spectral properties of the graph. The main concern of this paper is the relation of these exponents to the spectral density of the transition matrix. A series of new exponentse, e ,e _R ,e are introduced by allowingx to vary along the vertices. The results suggest that the geometric and resistance properties of the graph are responsible for the diffusion speed on the graph.