Synthesis, characterization, and photochemical properties of azobenzene-conjugated Ru(II) and Rh(III) bis(terpyridine) complexes

We synthesized azobenzene-conjugated bis(terpyridine) Ru(II) and Rh(III) mononuclear and dinuclear complexes and investigated their photochemical properties on excitation of the azo pi-pi band upon 366 nm light irradiation. The Ru mononuclear complex underwent trans-to-cis photoisomerization to reach the photostationary state with only 20% of the cis form, while the Ru dinuclear complex did not isomerize at all photochemically. On the other hand, the mononuclear and dinuclear Rh complexes showed almost complete trans-to-cis photoisomerization behavior. Cis forms of the Rh complexes thermally returned to the trans form at a much slower rate than those of organic azobenzenes, but they did not isomerize photochemically. The reduction potential of the cis forms was 80 mV more negative than that of the trans forms. The photoisomerization quantum yields of the Rh complexes were strongly dependent on the polarity, viscosity, and donor site of the solvents as well as the size of the counterions. We investigated the photoisomerization process of these complexes using femtosecond absorption spectroscopy. For the Rh complexes, we observed S(n) <-- S(2) and S(n) <-- S(1) absorption bands similar to those of organic azobenzenes. For the Ru complexes, we observed very fast bleaching of the MLCT band of the Ru complex, which indicated that the energy transfer pathway to the MLCT was the primary cause of the depressed photoisomerization. The electronic structures, which were estimated from ZINDO molecular orbital calculation, supported the different photochemical reaction behavior between the Ru and Rh complexes.     

Structure and reactivity of α,β-unsaturated ethers. V. Cationic copolymerizations of ring-substituted phenyl vinyl ethers

Phenyl vinyl ether (M₁) has been copolymerized with its various ring-substituted derivatives (M₂) in toluene at ?78°C with stannic tetrachloride as catalyst. The substituents investigated include p-CH₃O, m-CH₃O, p-CH₃, m-CH₃, p-Cl, and m-Cl. The course of copolymerization was followed by gas chromatographic determinations of residual monomers, and the monomer reactivity ratios were evaluated by use of the integral form of the Mayo-Lewis copolymerization equation. Except for the unusual case of the m-CH₃O derivative, the observed values of log (1/r₁) were found to be linearly correlated with Hammett's σ constants, the reaction constant being ρ = ?1.76 with the correlation coefficient r = 0.990. Comparisons of these results with the existing data for the styrene copolymerizations have enlightened the behavior of the oxygen atom in transmitting the electronic effects of ring substituents onto the reaction center.     

Novel synthesis of 1,3-dienes from 1-alkenes via /ldene/rd reaction with pummerer rearrangement product: a short synthesis of the sex pheromone of the red bollworm moth

A Pummerer rearrangement product, 4-chlorophenylthiomethyl trifluoroacetate (6), obtained from 4-chlorophenyl methyl sulfoxide (5) and trifluoroacetic anhydride, reacted with 1-alkenes in trifluoroacetic acid to give the ene products 8, which were readily converted into the terminal 1,3-dienes 10 by oxidation and subsequent pyrolysis. Using this method, 9,11-dodecadien-1-yl acetate (12), a sex pheromone of the red bollworm moth, was synthesized.     

Simons electrochemical fluorination of substituted homopiperazines(hexahydro-1,4-diazepines) and piperazines

Simons electrochemical fluorination (ECF) of 1,4-dimethyl-1,4-homopiperazine, methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine was studied. For comparison, ECF of three piperazines with a N-(methoxycarbonylmethyl) group(s) was also studied. ECF of 1,4-dimethyl-1,4-homopiperazine gave a low yield of corresponding perfluoro(1,4-dimethyl-1,4-homopiperazine) together with perfluoro(2,6-diaza-2,6-dimethylheptane) as the major product. Corresponding perfluoro(homopiperazines) with mono- and/or di-(fluorocarbonyldifluoromethyl) groups [CF₂C(O)F] at the 1- and/or 4-position were formed in low yields from methyl 4-ethylhomopiperazin-1-ylacetate and 1,4-bis(methoxycarbonylmethyl)-1,4-homopiperazine, respectively. These new seven-membered perfluoro(1,4-dialkyl-1,4-homopiperazines) were accompanied by the formation of mono- and/or di-basic linear perfluoroacid fluorides resulting from the CC bond scission at the 2- and 3-positions of the ring. From mono- and/or di-N-(methoxycarbonylmethyl)-substituted piperazines, corresponding perfluoropeperazines having the acid fluoride group(s) were formed in low yields.     

Effects of Hydrogen and Hydrogen Sulfide on Cumene Cracking Catalyzed by Pt/WO3-ZrO2. Control of Acidic and Metallic Functions

Synthesis of alumina aerogels was carried out by hydrolysis of aluminium isopropanolate and butanolate in benzene, methanol and isopropanol solutions as components of support precursors followed by gelation, drying under supercritical conditions and calcination. The influence of the type of precursor and solvent, synthesis temperature as well as drying and calcination temperature on bulk density, specific surface area and total pore volume was investigated.     

Decarboxylation of α-keto carboxylic acids by persulfoxide

Photosensitized oxygenation of diethyl sulfide in the presence of α-keto carboxylic acids caused oxidative decarboxylation of the acids by persulfoxide and gave carboxylic acids, carbon dioxide, diethyl sulfoxide and diethyl sulfone.     

A straightforward approach to antibodies recognising cancer specific glycopeptidic neoepitopes

Aberrantly truncated immature O-glycosylation in proteins occurs in essentially all types of epithelial cancer cells, which was demonstrated to be a common feature of most adenocarcinomas and strongly associated with cancer proliferation and metastasis. Although extensive efforts have been made toward the development of anticancer antibodies targeting MUC1, one of the most studied mucins having cancer-relevant immature O-glycans, no anti-MUC1 antibody recognises carbohydrates and the proximal MUC1 peptide region, concurrently. Here we present a general strategy that allows for the creation of antibodies interacting specifically with glycopeptidic neoepitopes by using homogeneous synthetic MUC1 glycopeptides designed for the streamlined process of immunization, antibody screening, three-dimensional structure analysis, epitope mapping and biochemical analysis. The X-ray crystal structure of the anti-MUC1 monoclonal antibody SN-101 complexed with the antigenic glycopeptide provides for the first time evidence that SN-101 recognises specifically the essential epitope by forming multiple hydrogen bonds both with the proximal peptide and GalNAc linked to the threonine residue, concurrently. Remarkably, the structure of the MUC1 glycopeptide in complex with SN-101 is identical to its solution NMR structure, an extended conformation induced by site-specific glycosylation. We demonstrate that this method accelerates dramatically the development of a new class of designated antibodies targeting a variety of “dynamic neoepitopes” elaborated by disease-specific O-glycosylation in the immunodominant mucin domains and mucin-like sequences found in intrinsically disordered regions of many proteins.

We developed new class of designated antibodies targeting of “dynamic neoepitopes” elaborated by disease-specific O-glycosylation at the immunodominant mucin domains.     

Monomer-isomerization polymerization. XXIII.. Monomer-isomerization polymerization of 5-phenyl-2-pentene with ziegler–natta catalysts

5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl₃–R₃Al (R = C₂H₅ or i-C₄H₉, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl₃ was in the following order: (C₂H₅)₃Al > (i-C₄H₉)₃Al > (C₂H₅)₂AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl₃–(C₂H₅)₃Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)₂], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios.     

Shipboard analysis of picomolar levels of manganese in seawater by chelating resin concentration and chemiluminescence detection

A new shipboard analytical method for determining picomolar levels of manganese in seawater has been developed. The method is based on a combination of chelating resin column extraction and improved chemiluminescence (CL) detection in a closed flow system. In this method, manganese in sample solution is selectively collected on newly-developed iminodiacetate-immobilized chelating resin, and then eluted with acidic solution containing hydrogen peroxide. The resulting eluent is mixed with luminol solution and aqueous ammonia after removal of iron ions by a chelating resin column, and then the mixture is introduced into the CL cell. The manganese concentration is obtained from the CL intensity. The detection limit (3SD) of manganese is 5 pmol L^–1 from 9 mL of seawater sample. The method was applied to seawater samples collected at the Okinawa Trough.