Investigation of surface topography, morphology and structure of amorphous carbon films by AFM and TEM

Morphology and structure of amorphous carbon films deposited with a pulsed arc source (LASER-ARC) have been studied using microscopical methods (SEM, TEM and AFM), electron diffraction and spectroscopical investigation (EELS). The parameters of the arc source and the deposition conditions (substrate temperature) influence morphology and structure of deposited amorphous carbon films. Especially the incorporation and growth of particles, embedded in the film have been investigated. By particle analysis using an optical microscope a majority of particles that is smaller than 500 nm has been determined. The morphology has been also demonstrated similar by AFM and TEM images. Their number and size of particles is strongly influenced by the deposition temperature. The structure of amorphous film is characterized by the EELS-spectra, but the particle structure was not detectable.     

Spectroscopic investigation of Pt—methanol interface in perchloric acid medium by sum-frequency generation

We recorded vibrational spectra of the CO poison resulting from the electrochemical decomposition of CH₃OH on platinum by sum-frequency generation using the infrared free electron laser CLIO. At high CH₃OH concentration (0.1 M) in the electrolyte, both multi-bonded and linearly bonded CO are equally present. At lower CH₃OH concentration (0.004 M), the multi-bonded species is predominant. The CO poison still remains on the surface at potentials (0.05 V/NHE) close to the hydrogen evolution onset.     

超重元素(新核素)合成研究进展情况分析和展望

本文在介绍和分析国际、国内在超重元素（新核素）合成实验研究与理论研究进展情况的基础上对我国今后如何从理论与实验的结合上开展超重元素（核）合成研究工作提出一些看法和建议，提供讨论。     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

醇体系中合成CuGaS2纳米晶及其形貌演变

以CuCl2·2H2O,自制的GaCl3和(NH2)2CS为原料,在乙二醇体系中合成了花状结构的CuGaS2纳米晶．产物分别用X射线粉末衍射仪、透射电子显微镜、场发射扫描电子显微镜、高分辩透射电子显微镜和X射线光电子能谱仪进行了表征．实验结果表明,220℃反应24 h得到均匀的花状纳米结构CuGaS2,它是由厚度80-100 nm的片晶组成．同时,通过反应时间的控制,可以清楚的看到由纳米颗粒到纳米球以及花状纳米结构的演变过程．另外,研究了反应温度、反应时间、溶剂等对产物和形貌的影响．此外,对花状结构纳米晶的生长机理进行了初步的探讨．室温荧光光谱表明,随粒径的降低,发光位发生了部分蓝移．     

潜体在非均质流体中的平衡位置与平衡过程

以探空气球为例,讨论潜体在非均质流体中的平衡位置与平衡过程.     

飞秒激光脉冲在三能级有机分子介质中传播时的频谱分析

通过采用预估校正的时域有限差分法求解麦克斯韦-布洛赫方程,我们研究了飞秒激光脉冲在三能级有机分子(4,4-二甲氨基二苯乙烯分子)介质中传播时脉冲的频谱演化情况.在单光子共振情况下,即入射脉冲频率等于1、2能级之间的共振频率,对大面积入射脉冲,由于强的二次激发的作用,电场频谱中出现了在ω32附近振荡的频率成分,ω32是2、3能级之间的共振频率,说明对大面积入射脉冲二能级模型已经失效,需要采用多能级模型来描述分子介质.在双光子共振情况下,即入射脉冲频率等于1、3能级之间的共振频率的一半,由于介质中放大的自发辐射和四波混频的作用,部分入射脉冲能量转化为高频和低频电场成分的能量,分子介质表现出了很强的光功率限幅特性.     

气相色谱-质谱联用法测定维生素C泡腾片中的甜蜜素

采用气相色谱-质谱(GC-MS)选择离子监测法(SIM),建立了准确可靠、灵敏度高、快速简便的测定维生素C泡腾片中甜蜜素含量的新方法.样品中的甜蜜素衍生后用有机试剂提取,在选择离子模式下进行测定,以保留时间和特征离子比例进行定性,单离子定量.甜蜜素的线性范围为0.05-10mg/L,检出限为0.6mg/kg,回收率为90.5%-96.9%,相对标准偏差小于4.4%.方法分析所用时间短,结果准确可靠,选择性好,适用于维生素C泡腾片中甜蜜素含量的检验.