Solvent‐Free Self‐Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic‐organic self‐assembly process. Here, we develop a facile, general, and high throughput solvent‐free self‐assembly strategy to synthesize a series of MMOs including single‐component MMOs and multi‐component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self‐assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.     

ZnS衬底上GeC/GaP增透保护膜系的制备及红外光学性质

把GeC/GaP双层膜用作ZnS衬底的长波红外(8~11.5μm波段)增透保护膜系。采用射频磁控溅射法,以高纯Ar为工作气体、单晶GaP圆片为靶制备了GaP薄膜;用射频磁控反应溅射法在高纯Ar和CH4的混合气体中,以单晶Ge圆片为靶制备了GeC薄膜。分别用柯西(Cauchy)公式和乌尔巴赫(Urbach)公式表示折射率和吸收系数,对薄膜的红外透射率曲线进行最小二乘法拟合,得到了它们的厚度及折射率、吸收系数等光学常数。GaP膜的折射率与块体材料的相近,在波长10μm处约为2.9;GeC膜的折射率较小,在波长10μm处约为1.78。用所得到的薄膜折射率,通过计算机膜系自动设计软件在ZnS衬底上设计并制备出了GeC/GaP双层增透保护膜系,当GaP膜厚较大时,由于吸收增大膜系增透效果较差;当GaP膜厚较小时,膜系有较好的增透效果。     

Combining Complex and Radial Slave Boson Fields within the Kotliar–Ruckenstein Representation of Correlated Impurities

The gauge symmetry group of any slave boson representation allows to gauge away the phase of bosonic fields. One benefit of this radial field formulation is the elimination of spurious Bose condensations when saddle-point approximation is performed. Within the Kotliar–Ruckenstein representation, three of the four bosonic fields can be radial while the last one has to remain complex. In this work, the procedure to carry out the functional integration involving constrained fermionic fields, complex bosonic fields, and radial bosonic fields is presented. The correctness of the representation is verified by exactly evaluating the partition function and the Green's function of the Hubbard model in the atomic limit.     

DCE-MRI定量参数对子宫内膜癌的诊断价值及与临床病理因素的相关性

本文选取了子宫内膜癌患者108例作为观察组,另选取子宫内膜良性病变患者105例作为对照组,均行DCE-MRI检查后发现,观察组容量转移常数(Ktrans)、速率常数(Kep)、血管外细胞外间隙容积比值(Ve)高于对照组(P＜0.05);Ktrans、Kep、Ve值联合诊断子宫内膜癌的曲线下面积(AUC)为0.841;K...     

Faster Sickling Kinetics and Sickle Cell Shape Evolution during Repeated Deoxygenation and Oxygenation Cycles

Experimental Mechanics - Kinetics of cell sickling and morphological change have been recognized as important parameters that are correlated closely with altered blood rheology and vasoocclusion in...     

SYNTHESIS AND CHARACTERIZATION OF N-（1-NAPHTHYL） SUCCINIMIDE

In this paper a modified two-step procedure for synthesis of N-（1-naphthyl） suecinimide （NaS） was developed, and the molecular structure of NaS was properly characterized by XRD, FT-IR, 1H NMR, DSC, etc. The results show that the melting point of our product is 159 ℃-160.5 ℃, and the characteristic infrared absorption band of carbonyl group splits into two peaks （1705cm^-3/1779cm^-3）, which are found to be quite different from the documented data （rap 147℃ -149℃; IR C=0-1700cm^-3）. Besides, photophysical spectroscopy was found to be powerful to study the molecular structure and crystal morphology of NaS compound.     

Effect of CeO2 preparation method and Cu loading on CuO/CeO2 catalysts for methane combustion

CeO2 was synthesized by sol-gel, hydrothermal, nitrate thermal decomposition methods, respectively, and used as support to prepare CuO/CeO2 catalysts. According to characterization and reaction results, preparation method of CeO2 had a great influence on the physicochemical properties and activities of CuO/CeO2 catalysts. CuO with high dispersion and strong interaction with CeO2 was highly active in methane combustion, while CuO particles less associated with CeO2 showed less activity. The CuO catalyst supported on CeO2 which was prepared via nitrate thermal decomposition method showed the largest area, the smallest particle size, the highest dispersion of copper species and strong support metal interactions. Therefore, it presented the highest redox ability and activity for methane combustion. Activities of the catalysts with different copper content kept increasing until 5% Cu loading and from then on kept constant. Moreover, methane conversion decreased as methane space velocities increased on CuO/CeO2 catalyst. Addition of CO2 to the feed did not produce a significant effect on the catalytic activity, but the presence of H2O provoked a remarkable decrease on the activity of CuO/CeO2 catalyst.     

Effect of water on the performance of Pd-ZSM-5 catalysts for the combustion of methane

Palladium-based catalysts were prepared using impregnation （I） and ion-exchange method （E） with ZSM-5 as support. Pd-ZSM-5（I） and Pd-ZSM-5（E） catalysts presented the high activity for the combustion of methane. The order of activity was consistent with Brcnsted acidity of the catalysts： Pd-ZSM-5（I）〉Pd-ZSM-5（E）. It was shown by FT-IR that methane was adsorbed on the acidic bridging hydroxyl groups of ZSM-5-supported Pd catalysts. The effect of water on the activity of Pd-ZSM-5 was investigated. The inhibition effect of water on the conversion of methane was observed. However, water promoted the stability of Pd-ZSM-5 obviously during extended time periods. XPS measurement showed that Pd/Si ratio near the surface of Pd-ZSM-5（E） decreased more pronouncedly with time in dry stream than that of Pd-ZSM-5（I）, this is attributed to the dispersion of Pd into the micropores. The addition of water, however, retarded Pd dispersion. And high partial pressure of methane reduced this effect of water vapor. The decrease in activity during the stability test can be explained on the basis of the reduction of Pd/Si ratio.     

Co-W合金镀层表面氧化膜在碱性体系中的电化学研究

采用电化学手段以及Mott-Schottky理论, 并结合氧化膜点缺陷模型(PDM)分析研究了Co-W合金镀层在1 mol• L^－1 NaOH溶液中表面氧化膜的半导体性质, 并分别计算出了不同W含量的Co-W合金镀层在－0.15, －0.25和－0.35 V三个不同电位下阳极氧化后氧化膜的供体密度、平带电位及氧空穴扩散系数. 结果表明, Co-W合金镀层在1 mol•L^－1 NaOH溶液中表面氧化膜的Mott-Schottky曲线线性区斜率为正, 表现出N型半导体性质|随着阳极氧化电位的升高或合金镀层W含量的降低, 氧化膜供体密度N_D逐渐增大, 导致氧化膜被破坏或发生点蚀的几率升高|随着阳极氧化电位的降低或合金镀层W含量的降低, 氧化膜平带电位呈降低趋势, 说明其耐蚀性升高|不同W含量的Co-W合金镀层在三个不同电位下阳极氧化后的氧化膜的氧空穴扩散系数为(1.543～8.533)×10^－14 cm²•s^－1.     

高效液相色谱-串联质谱法同时测定食品中五种黄色化工染料

采用高效液相色谱-串联质谱法(HPLC-MS/MS)建立了食品中非法添加的碱性橙、碱性嫩黄、酸性橙I、酸性橙II和酸性黄36这5种黄色工业染料的定量定性分析方法。使用Agilent ODS C18分离柱(50 mm×2.0 mm, 1.8 μm),以5 mmol/L乙酸铵水溶液(0.1%甲酸)-乙腈(3:2, v/v)为流动相,流速为0.3 mL/min。采用电喷雾离子化源,以多反应监测(MRM)方式分别在正、负离子模式下进行检测。在最佳检测条件下,得到了较宽的线性范围和较低的定量检出限。碱性橙和碱性嫩黄的线性范围均为5.0～80.0 mg/L;酸性橙I、酸性橙II及酸性黄36的线性范围均为10.0～160.0 μg/L。食品中碱性橙、碱性嫩黄、酸性橙I、酸性橙II及酸性黄36的定量限分别为20、20、40、40、40 ng/g。该方法重现性较好,保留时间和峰面积的相对标准偏差分别不大于0.50%和2.14%。本研究还测定了鸡肉、豆制品和黄鱼中添加的5种化工染料,回收率在79.8%~95.2%之间,结果令人满意。