Preparation of a magnetic molecularly imprinted polymer with pseudo template for rapid simultaneous determination of cyromazine and melamine in bio-matrix samples

A magnetic molecularly imprinted polymer (M-MIP) for cyromazine and melamine was prepared by simple suspension polymerization using a pseudo template, 2-(4,6-diamino-1,3,5-triazin-2-ylamino)ethanethiol disulfide. The M-MIP was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, and vibrating sample magnetometry. Molecular recognition properties and binding capability to cyromazine and melamine were evaluated by adsorption testing, which showed the M-MIP had better affinity and selectivity than the magnetic non-imprinted polymer (M-NIP) for cyromazine and melamine. A method based on molecularly imprinted solid-phase extraction assisted by magnetic separation was developed for extraction of cyromazine and melamine from bio-matrix samples. Various conditions, for example desorption conditions, amount of M-MIP, extraction time, and sample pH were optimized. High-performance liquid chromatography with UV detection was used to determine cyromazine and melamine after extraction. The proposed method was successfully applied to determination of cyromazine and melamine in egg and milk samples. Recovery of standard spiked cyromazine and melamine from these samples was between 71.86 and 80.57%, with intraday and interday relative standard deviation ranging from 3.45 to 6.39% and from 3.95 to 7.84%, respectively. The results indicate that the pseudo template M-MIP can be used for preconcentration, purification, and analysis of cyromazine and melamine in bio-matrix samples.     

Determination of synthetic musk compounds in indoor house dust by gas chromatography–ion trap mass spectrometry

A new method for the simultaneous determination of 11 synthetic musks and one fragrance compound in house dust was developed. The nitro musks included musk ketone (MK, 4-tert-butyl-3,5-dinitro-2,6-dimethylacetophenone), musk xylene (MX, 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene), musk ambrette (1-tert-butyl-2-methoxy-4-methyl-3,5-dinitrobenzene) and musk moskene (1,1,3,3,5-pentamethyl-4,6-dinitroindane). The polycyclic musk compounds were 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-(γ)-2-benzopyran (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), 4-acetyl-1,1-dimethyl-6-tert-butylindane, 6-acetyl-1,1,2,3,3,5-hexamethylindane, 5-acetyl-1,1,2,6-tetramethyl-3-isopropylindane, 6,7-dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanon. The one macrocyclic musk was 1,4-dioxacycloheptadecane-5,17-dione. The bicyclic hydrocarbon fragrance compound (1,2,3,4,5,6,7,8-octahydro-2,3,8,8-tetramethylnaphthalen-2yl)ethan-1-one (OTNE) and HHCB-lactone (4,6,6,7,8,8-hexamethyl-1H,3H,4H,6H,7H, 8H-indeno[5,6-c]pyran-1-one), a degradation product of HHCB, were also analysed. NIST SRM 2781 (domestic sludge) and SRM 2585 (organic contaminants in house dust) were analysed for these target compounds. The method was applied for the analysis of 49 paired samples collected using two vacuum sampling methods: a sample of fresh or "active" dust (FD) collected using a Pullman-Holt vacuum sampler, and a household dust (HD) sample taken from the participants' vacuum cleaners. Method detection limits and recoveries ranged from 12 to 48?ng/g and 54 to 117?%, respectively. AHTN, HHCB, OTNE and HHCB-lactone were detected in all samples, with median concentrations of 552, 676, 252 and 453?ng/g for FD samples, respectively; and 405, 992, 212 and 492?ng/g for HD samples, respectively. MX and MK were detected with high frequencies but with much lower concentrations. The two sampling methods produced comparable results for the target analytes. Widely scattered concentration levels were observed for target analytes from this set of 49 house dust samples, suggesting a wide variability in Canadian household exposure to synthetic musks.     

Ag-nanoparticle-loaded mesoporous silica: spontaneous formation of Ag nanoparticles and mesoporous silica SBA-15 by a one-pot strategy and their catalytic applications

A facile one-step method was proposed for the successful synthesis of Ag-nanoparticle-loaded mesoporous silica SBA-15 composites, where silver ions and their corresponding reductant aniline were added in the traditional synthetic system of mesoporous silica SBA-15 containing P123 as the surfactant and TEOS as the silica source. Mesoporous silica SBA-15 and Ag nanoparticles were spontaneously formed with Ag nanoparticles embedded in channels and even implanted in frameworks of mesoporous silica SBA-15. A tentative formation process was then proposed according to experimental observations. Furthermore, catalytic activities of Ag-nanoparticle-loaded silica SBA-15 composites toward the reduction of 4-nitrophenol in the presence of NaBH(4) and the reduction of H(2)O(2) were also investigated.     

A simple colorimetric detection of DNA methylation

In this work, we describe a simple colorimetric method to detect DNA methylation. Adenomatous polyposis coli (APC) with a small CpG region containing methylated cytosine (methylated APC) was synthesized and tested. Methylated APC was first captured and enriched by anti-5-methylcytosine monoclonal antibody conjugated magnetic microspheres (MMPs). Then a probe partly complementary to the APC sequence was added, resulting in the formation of DNA duplexes. The microsphere-captured probe was then released by heat denaturation and added into unmodified gold nanoparticle (AuNP) solution. Colorimetric detection was performed by salt-induced aggregation. The limit of detection is 80 fmol. Semi-quantitative analysis was done with a UV/Vis spectrophotometer by recording the absorbance of AuNP solution at 520 nm. Thus, this method provides a simple, rapid and quantitative tool for DNA methylation detection.     

Formation of different gold nanocrystal core-resin shell structures through the control of the core assembly and shell polymerization

The formation of different Au nanocrystal core-resin shell structures through the control of the nanocrystal assembly and shell polymerization is investigated. 4-Mercaptophenol is employed together with formaldehyde as the resin monomers. 4-Mercaptophenol molecules bond to the surface of Au nanocrystals so that the resultant phenolic resin can intimately encapsulate Au nanocrystals. The morphologies of the obtained structures are determined by the nanocrystal assembly and the monomer polymerization behaviors, which are controlled by the solution pH as well as the monomer amounts. At pH = 8-9, Au nanorods are assembled and fused together under hydrothermal conditions in a preferential end-to-end manner. The fused structures are coated with a layer of resin, with the thickness controlled by the supplied amounts of the monomers. At pH = ～10, Au nanorods are coated with resin of controllable thicknesses and separated from each other. The resin-coated Au nanorods are stable in both aqueous and nonaqueous solutions. At pH = ～12, Au nanorods are coated with a thin layer of resin and assembled together in a side-by-side manner. A similar assembly and resin coating behavior is also observed with Au nanopolyhedrons. Moreover, plasmonic-fluorescent bifunctional structures are readily produced by incorporating CdTe nanocrystals in the resin shell that is coated on Au nanocrystals, owing to the presence of a number of thiol groups in the resin shell.     

Isolation of (CO)1- and (CO2)1- radical complexes of rare earths via Ln(NR2)3/K reduction and [K2(18-crown-6)2]2+ oligomerization

Deep-blue solutions of Y(2+) formed from Y(NR(2))(3) (R = SiMe(3)) and excess potassium in the presence of 18-crown-6 at -45 °C under vacuum in diethyl ether react with CO at -78 °C to form colorless crystals of the (CO)(1-) radical complex, {[(R(2)N)(3)Y(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 1. The polymeric structure contains trigonal bipyramidal [(R(2)N)(3)Y(μ-CO)(2)](2-) units with axial (CO)(1-) ligands linked by [K(2)(18-crown-6)(2)](2+) dications. Byproducts such as the ynediolate, [(R(2)N)(3)Y](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 2, in which two (CO)(1-) anions are coupled to form (OC≡CO)(2-), and the insertion/rearrangement product, {(R(2)N)(2)Y[OC(═CH(2))Si(Me(2))NSiMe(3)]}[K(18-crown-6)], 3, are common in these reactions that give variable results depending on the specific reaction conditions. The CO reduction in the presence of THF forms a solvated variant of 2, the ynediolate [(R(2)N)(3)Y](2)(μ-OC≡CO)[K(18-crown-6)(THF)(2)](2), 2a. CO(2) reacts analogously with Y(2+) to form the (CO(2))(1-) radical complex, {[(R(2)N)(3)Y(μ-CO(2))(2)][K(2)(18-crown-6)(2)]}(n), 4, that has a structure similar to that of 1. Analogous (CO)(1-) and (OC≡CO)(2-) complexes of lutetium were isolated using Lu(NR(2))(3)/K/18-crown-6: {[(R(2)N)(3)Lu(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 5, [(R(2)N)(3)Lu](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 6, and [(R(2)N)(3)Lu](2)(μ-OC≡CO)[K(18-crown-6)(Et(2)O)(2)](2), 6a.     

Optical Stark spectroscopy of the 2(0)(6) Ã1A'-X̃1A' band of chloro-methylene, HCCl

The laser induced fluorescence spectra of the 2(0)(6)A?(1)A(')-X?(1)A(') band of a rotationally cold (<20 K) molecular beam sample of chloro-methylene, HCCl, has been recorded, field-free and in the presence of a static electric field. The field-free spectrum has been analyzed to produce an improved set of spectroscopic parameters for the A?(1)A(') (060) vibronic state. The magnitude of the a-component of the permanent electric dipole moment, μ(a), for the X?(1)A(') (000) vibronic state has been determined to be 0.501(1) D from the analysis of the observed electric field induced shifts. Comparisons with theoretical predictions and flouro-methylene, HCF, are presented.     

Stereoselective assembly of complex oligosaccharides using anomeric sulfonium ions as glycosyl donors

The development of selectively protected monosaccharide building blocks that can reliably be glycosylated with a wide variety of acceptors is expected to make oligosaccharide synthesis a more routine operation. In particular, there is an urgent need for the development of modular building blocks that can readily be converted into glycosyl donors for glycosylations that give reliably high 1,2-cis-anomeric selectivity. We report here that 1,2-oxathiane ethers are stable under acidic, basic, and reductive conditions making it possible to conduct a wide range of protecting group manipulations and install selectively removable protecting groups such as levulinoyl (Lev) ester, fluorenylmethyloxy (Fmoc)- and allyloxy (Alloc)-carbonates, and 2-methyl naphthyl ethers (Nap). The 1,2-oxathiane ethers could easily be converted into bicyclic anomeric sulfonium ions by oxidization to sulfoxides and arylated with 1,3,5-trimethoxybenzene. The resulting sulfonium ions gave high 1,2-cis-anomeric selectivity when glycosylated with a wide variety of glycosyl acceptors including properly protected amino acids, primary and secondary sugar alcohols and partially protected thioglycosides. The selective protected 1,2-oxathianes were successfully employed in the preparation of a branched glucoside derived from a glycogen-like polysaccharide isolated form the fungus Pseudallescheria boydii , which is involved in fungal phagocytosis and activation of innate immune responses. The compound was assembled by a latent-active glycosylation strategy in which an oxathiane was employed as an acceptor in a glycosylation with a sulfoxide donor. The product of such a glycosylation was oxidized to a sulfoxide for a subsequent glycosylation. The use of Nap and Fmoc as temporary protecting groups made it possible to install branching points.     

Mononuclear gold(I) acetylide complexes with urea group: synthesis, characterization, photophysics, and anion sensing properties

A series of mononuclear gold(I) acetylide complexes with urea moiety, R'(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(4)-4-R (R' = cyclohexyl, R = NO(2) (2a), CF(3) (2b), Cl (2c), H (2d), CH(3) (2e), (t)Bu (2f), OCH(3) (2g); R' = phenyl, R = NO(2) (3a), OCH(3) (3b); R' = 4-methoxyphenyl, R = H (4a), OCH(3) (4b)), have been synthesized and characterized. The crystal structures of Ph(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(4)-4-NO(2) (3a) and (4-CH(3)OC(6)H(4))(3)PAuC≡CC(6)H(4)-4-NHC(O)NHC(6)H(5) (4a) have been determined by X-ray diffraction. Complexes 2a-2g, 3b, and 4a-4b show intense luminescence both in the solid state and in degassed THF solution at 298 K. Anion binding properties of complexes 2a-2g, 3a-3b, and 4a-4b have been studied by UV-vis and (1)H NMR titration experiments. In general, the log K values of 2a-2g with the same anion in THF depend on the substituent R on the acetylide ligand of 2a-2g: R = NO(2) (2a) > CF(3) (2b) ≥ Cl (2c) > H (2d) > CH(3) (2e) ≈ (t)Bu (2f) ≥ OCH(3) (2g). Complex 2a with NO(2) group shows the dramatic color change toward F(-) in DMSO, which provides an access of naked eye detection of F(-).     

Gold nanoparticles assembling on smooth silver spheres for surface-enhanced Raman spectroscopy

A simple and cost-effective chemical method was introduced to assemble gold (Au) nanoparticles on smooth silver (Ag) spheres for realizing surface-enhanced Raman scattering (SERS) enhancement by the replacement reaction between chloroauric acid and Ag spheres. In addition, the Ag-Au core-shell spheres were fabricated when a certain amount of chloroauric acid was used in the reaction solution. We found that the Ag particles decorated with small Au nanoparticles demonstrated the strongest SERS enhancement, while Ag-Au core-shell spheres showed the weakest enhancement.