原子力显微术轻敲模式中探针样品接触过程及相位衬度研究

借助简单的有阻尼受迫振子模型，研究了原子力显微术轻敲模式中探针与样品接触时间t_c、样品的表面形变D_z和相位衬度对探针设置高度z_c及样品杨氏模量E_s的依赖关系.结果发现,t_c与D_z均随E_s及z_c的增大而减小，同时探针与样品作用过程伴随很小的能量耗散.对轻敲过程中相移量φ的研究表明，E_s较大的样品有较小的φ，且φ随 关键词： 原子力显微术 轻敲模式 相位衬度     

External Electric Field Effect on Hydrogenic Donor Impurity in Zinc-Blende InGaN Quantum Dot

The binding energy of a hydrogenic donor impurity in zinc-blende (ZB) InGaN quantum dot (QD) is calculated in the framework of effective-mass envelope-function theory using the plane wave basis. It is shown that the donor binding energy is highly dependent on the impurity position, QD size and the external electric field. The symmetry of the electron probability distribution is broken and the maximum of the donor binding energy is shifted from the centre of QD in the presence of the external electric field. The degenerating energy levels for symmetrical positions with respect to the centre of QD are split. The splitting increases with the increase of QD height while the splitting increases up to a maximum value and then decreases with the increase of QD radius.     

有效质量差异和电场对GaN/AlxGa1-xN球形量子点电子结构的影响

用平面波展开法对GaN/Al_xGa_1-xN球形量子点中类氢杂质态能级随量子点半径、Al组分以及结合能随Al组分的变化规律进行了详细讨论.计算了量子点内外有效质量差异对杂质态能级和结合能的修正,结果表明对于Al组分较高的GaN/Al_xGa_1-xN球形量子点,电子有效质量差异对杂质能级和结合能的修正不能忽略.考虑电子有效质量差异后,进一步具体计算了杂质结合能随量子点半 关键词： 球形量子点 平面波展开法 有效质量     

Fragmentation Character of Resonance Events in BEPC e+e－ Annihilation

In this paper an important character was found that the final hadron multiplicities of direct J/ψ decays satisfy the same universal mass dependence as that in e⁺e^－→q₀q₀ continuum events. This indicates that the fragmentation of quark and gluon to hadron follows the same mechanism. We give a reasonable interpretation to final baryon multiplicity that is enhanced by 2.5 times in direct Y decays compared to the continuum through our calculating results. But we cannot find this similar phenomenon in direct J/ψ decays.     

碳氢化合物/阻燃剂混合工质替代HCFC22的研究

为推进碳氧化合物(HCs)自然工质的安全应用,本文尝试引入阻燃组元,组成以自然工质为主体,环境特性、 安全性和循环性能俱佳的HCs/阻燃剂混合工质。对阻燃组元的选择原则和性能进行了探讨,通过理论循环分析,得出了 CO2/HC1270/R13I1等6种HCFC22替代物。     

Tm3+,Yb3+共掺钨酸钙多晶材料的上转换发光及荧光温度特性

采用高温固相法制备了Tm³⁺,Yb³共掺CaWO₄多晶材料. 980 nm二极管激光器激发下,在可见区获得了¹G₄→³H₆,¹G₄→³H₄,³H₂,³H₃→³H₆ 跃迁产生的上转换荧光. 讨论了Yb³⁺ 离子浓度的变化对Tm³⁺ 的上转换发光强度的影响,同时根据荧光强度比的方法研究了689 和705 nm 红色上转换荧光在313–773 K 范围内的温度特性. 结果表明：基于Tm³⁺,Yb³⁺ 共掺CaWO₄ 多晶材料的红色上转换荧光可以实现温度监测,其测温的最大灵敏度值为5.7×10^-4 K^-1,相应的测量温度为458 K. 关键词： 上转换发光 3+')" href="#">Tm³⁺ 钨酸钙 荧光温度传感     

磁控溅射(Ti,N)/Al纳米复合薄膜的微结构和力学性能

采用Al和TiN靶通过磁控共溅射方法, 制备了一系列Ti:N≈1的不同(Ti, N) 含量的铝基纳米复合薄膜, 利用X射线能量分散谱仪、X射线衍射仪、透射电子显微镜和纳米力学探针表征了薄膜的成分、 微结构和力学性能, 研究了(Ti, N)含量对复合薄膜微结构和力学性能的影响. 结果表明: Ti, N原子的共同加入使复合薄膜形成了同时具有置换固溶和间隙固溶特征的"双超过饱和固溶体", 薄膜的晶粒随着溶质含量的增加逐步纳米化, 并进一步形成非晶结构, 晶界区域形成溶质原子的富集区. 相应地, 复合薄膜的硬度在含1.8 at.%(Ti, N) 时就可迅速提高到3.9 GPa; 随着TiN含量的增加, 薄膜的硬度进一步提高到含17.1 at.%(Ti, N)时的8.8 GPa. 以上结果显示出Ti和N"双超过饱和固溶"对Al薄膜极其显著的强化效果.     

Promotional effect of cobalt addition on catalytic performance of Ce<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript> mixed oxide for diesel soot combustion

A series of Co-modified Ce_0.5Zr_0.5O₂ catalysts with different concentrations of Co (mass %: 0, 2, 4, 6, 8, 10) was investigated for diesel soot combustion. Ce_0.5Zr_0.5O₂ was prepared using the coprecipitation method and Co was loaded onto the oxide using the incipient wetness impregnation method. The activities of the catalysts were evaluated by thermogravimetric (TG) analysis and temperature-programmed oxidation (TPO) experiments. The results showed the soot combustion activities of the catalysts to be effectively improved by the addition of Co, 6 % Co/Ce_0.5Zr_0.5O₂ and that the 8 % Co/Ce_0.5Zr_0.5O₂ catalysts exhibited the best catalytic performance in terms of lower soot ignition temperature (T_i at 349°C) and maximal soot oxidation rate temperature (T_m at 358°C). The reasons for the improved activity were investigated by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). These results revealed that the presence of Co could lower the reduction temperature due to the synergistic effect between Co and Ce, thereby improving the activity of the catalysts in soot combustion. The 6 % Co catalyst exhibited the best catalytic performance, which could be attributed to the greater amounts of Co³⁺ and surface oxygen species on the catalyst.     

贵金属负载的棒状ZnO复合光催化剂的制备及其提升的光催化性能

以水热制备的ZnO纳米棒为基底,通过乙二醇液相还原法负载不同贵金属颗粒(Pt、Pd、Ru)构筑贵金属负载的ZnO纳米棒复合光催化剂。实验结果表明在制备条件相同时,Pt/ZnO样品中Pt颗粒尺寸较小,分布均匀;Pd/ZnO样品中Pd颗粒尺寸较大且团聚严重;Ru/ZnO样品则几乎没有Ru颗粒负载。在紫外光照射下降解亚甲基蓝的反应中,Pt/ZnO表现出最高的光催化性能,Pd/ZnO样品次之,而Ru/ZnO则表现出与ZnO纳米棒相似的光催化活性;表明小尺寸和大小均匀的贵金属颗粒对ZnO纳米棒的催化性能有着显著的提升作用。对Pt/ZnO来说,当Pt载量为3.2%时Pt/ZnO催化剂的光催化活性最高。