Investigation of the Electroreduction Behavior,Electroreduction Mechanism and Voltammetric Determination of Medetomidine on the Graphene Paste Electrode

This paper presents a method for the construction of a graphene paste electrode (GPE) from reduced graphene oxide (RGO). The GPE was successfully used for the determination of medetomidine. The influence of some experimental variables such as pH, supporting electrolyte, scan rate, and possible interferences were studied. Differential pulse voltammetric (DPV) peak currents of medetomidine increased linearly with its concentration in the range from 0.009 to 2.5 µM. The limit of detection (LOD) and limit of quantitation (LOQ) values for the determination of medetomidine were 2.8 and 9.2 nM, respectively. Also, for the first time, the electroreduction behavior of medetomidine was investigated.     

Electrochemical platform for simultaneous determination of levodopa,acetaminophen and tyrosine using a graphene and ferrocene modified carbon paste electrode

Microchimica Acta - A carbon paste electrode (CPE) was modified with graphene and ethyl 2-(4-ferrocenyl-[1,2,3]triazol-1-yl) acetate (EFTA) and used for electrocatalytic oxidation of levodopa....     

A relationship between three analytical approaches to nonlinear problems

In this work, the relationship between three analytical techniques is demonstrated. The direct relationship between the variational approach (VA) and the Hamiltonian approach (HA) is illustrated for a first approximation, and subsequently the relationship between the variational approach and the harmonic balance method (HBM) is concluded. Moreover, the relationship between HA and VA is investigated for higher order solutions.     

Phyto-synthesis of silver nanoparticles using aerial extract of Salvia leriifolia Benth and evaluation of their antibacterial and photo-catalytic properties

Research on Chemical Intermediates - We have synthesized silver nanoparticles (Ag-NPs) via a simple and eco-friendly method through the utilization of aqueous aerial parts of Salvia leriifolia...     

Effect of thickness of CdTe/Ge heterojunction photodetectors on optoelectronic properties

The influence of the thickness of CdTe/n-Ge heterojunction photodetectors on I–V curves was studied experimentally and theoretically. The thicknesses of the CdTe thin films were 110, 130, 150, and 200 nm. The power intensity of illumination was 150 mW/cm². Increasing the thickness led to an increase in photocurrent.     

Performance improvement of PDMS/PES membrane by adding silicalite-1 nanoparticles: separation of xenon and krypton

The polydimethylsiloxane (PDMS) mixed matrix membrane with dispersed phase of nanozeolite silicalite-1 has been synthesized on polyethersulphone (PES) as a support, and its performance in the gas separation of xenon and krypton has been studied. For this purpose, nanozeolite silicalite-1 is synthesized by the hydrothermal clear solution method and is characterized by XRD and SEM analysis. In this research, the separation performance of MMM has also been compared with the polymeric PDMS membrane. Furthermore, the effect of feed pressure and loading percentage of nanozeolite in the polymeric matrix are evaluated. The results indicate that the addition of nanozeolite to the polymeric matrix improves its separation performance, and that the changes of the feed pressure have no major effect. The average permeability of the krypton and xenon gases through the PDMS polymeric membrane is calculated as 1.25 × 10^?9 and 1.78 × 10^?9 cm mol/(cm² s kPa), respectively, while by adding only 5 wt% of nanosilicalite-1 to the polymeric matrix of the membrane, this amount increased to 1.82 × 10^?9 and 8.07 × 10^?9 cm mol/(cm² s kPa), respectively. In addition, the presence of nanosilicalite-1 as the filler leads to an increase in the selectivity of xenon to krypton up to 4.38.     

The Efficient Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones and Their Sulfur Derivatives with H2SO4 Immobilized on Activated Charcoal

Abstract

Various 3,4-dihydropyrimidin-2-(1H)-ones (DHPMs) and their sulfur derivatives were efficiently synthesized by a one-pot cyclocondensation reaction of aromatic and aliphatic aldehydes, β-dicarbonyl compounds and urea (or thiourea) in the presence of sulfuric acid immobilized on activated charcoal (133% w/w). The reactions were carried out in refluxing n-hexane-acetonitrile (2.5:0.5 mL) within 5–150 min to give 3,4-dihydropyrimidinones (or thiones) in high to excellent yields (81–97%).     

Absolute Rate Constants in Free-Radical Polymerization. III. Determination of Propagation and Termination Rate Constants for Styrene and Methyl Methacrylate

A spatially intermittent polymerization (SIP) reactor has been used for determination of absolute rate constants in photo-initiated, free-radical polymerization of styrene (STY) and methyl methacrylate (MMA). Experimental data are reported in the temperature range 15-30°C and in the high molecular weight region for MMA and STY. Additional experimental data are reported at 30° C and various lower molecular weights for STY which indicate that the propagation rate constant K is independent of polymer molecular weight, and K is dependent on molecular weight, especially at low molecular weight, approaching an approximately constant value at high molecular weight.     

A simple accurate model for prediction of deflagration temperature of energetic compounds

A novel general method is introduced to predict deflagration temperature of organic energetic compounds containing at least –NNO₂, –ONO₂, or –CNO₂ groups. Deflagration temperature is an important safety parameter in working with dangerous energetic compounds and their environmental problems. It is shown that the contribution of some molecular structure parameters can be used to interpret thermal decomposition of an energetic compound. For 86 energetic materials (corresponding to 102 measured values) with different molecular structures, the new correlation has the root mean square (rms) and the average deviations of 23.8 and 19.0 K, respectively. The new method is also tested for some energetic compounds with complex molecular structures, e.g., two new organic energetic molecules N,N′-bis(1,2,4-triazol-3yl)-4,4′-diamino-2,2′,3,3′,5,5′,6,6′-octanitroazobenzene (BTDAONAB) and 2,4,6-trinitrophloroglucinol.