An anisotropic fibre-network model for mechano-sorptive creep in paper

In this paper a simplified network model for mechano-sorptive creep is presented, which is a further development of an earlier paper [Strömbro, J., Gudmundson, P., 2008. Mechano-sorptive creep under compressive loading – a micromechanical model. International Journal of Solids and Structures 45 (9), 2420–2450.]. It is assumed that the anisotropic hygroexpansion of the fibres leads to large stresses at the fibre bonds when the moisture content changes. The resulting stress state will accelerate creep if the fibre material obeys a constitutive law that is non-linear. Fibre kinks are included in order to capture experimental observations of larger mechano-sorptive effects in compression than in tension. Moisture dependent material parameters and anisotropy in the fibre distribution have been introduced. Theoretical predictions based on the model are compared to experimental results for an anisotropic paper both under tensile and compressive loading at varying moisture content and it is found that the important features in the experiments are captured by the model. Different kinds of drying conditions have also been examined.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.     

Rapid and accurate amperometric determination of acetaminophen in pharmaceutical preparations and spiked human blood serum samples at cadmium pentacyanonitrosylferrate modified glassy carbon electrode

The present work describes a rapid and accurate amperometric technique for the determination of acetaminophen (ACT) in pharmaceutical preparations and human blood serum, based on electrocatalytic oxidation of ACT at a glassy carbon electrode modified by cadmium pentacyanonitrosylferrate (CdPCNF) film. The electrocatalytic response of the modified GC electrode was linear over the concentration of 1.64-52.90 μM. The limit of detection was found to be 2.04 μM by amperometric technique. The method was successfully utilized for the determination of ACT in various pharmaceutical preparations and the results have been statistically compared with those obtained by the official method. The interference of some pharmaceutical and biological compounds was investigated. The results of interference study showed that the Nafion-coated CdPCNF|GC electrode can be utilized as a selective amperometric sensor for acetaminophen determination in human blood serum. The mean value of rate constant k for catalytic reaction, and the diffusion coefficient of ACT (D) in the phosphate buffer solution of pH 7.2 were found to be 4.27 × 10² M?¹ s?¹, and (4.25 ± 0.33) × 10^?6 cm² s^?1, respectively.     

Globally anisotropic high porosity silica aerogels

We discuss two methods by which high porosity silica aerogels can be engineered to exhibit global anisotropy. First, anisotropy can be introduced with axial strain (i.e. axial compression). In addition, intrinsic anisotropy can result during growth and drying stages and, suitably controlled, it can be correlated with preferential radial shrinkage in cylindrical samples. We have performed small angle X-ray scattering (SAXS) to characterize these two types of anisotropy. We show that global anisotropy originating from either strain or shrinkage leads to optical birefringence and that optical cross-polarization studies are a useful characterization of the uniformity of the imposed global anisotropy.     

Time-resolved cavity ringdown spectroscopy on nanoparticle generation in a SiH4–H2 VHF plasma

Time-resolved cavity ringdown (τ-CRD) spectroscopy has been applied to monitor the silyl (SiH₃) radicals and nanoparticles in a pulsed very high frequency (VHF) silane-hydrogen plasma under microcrystalline silicon (μc-Si:H) deposition conditions. The measured cavity loss reveals four time intervals (I up to VI) in the first 4 s of the plasma pulse. By variation of the laser wavelength, it is demonstrated that the small cavity loss at 220 nm reflects the SiH₃ absorption in interval I. In intervals II and III, an additional cavity loss appears. This additional cavity loss corresponds to Rayleigh and Mie scattering by growing nanoparticles. Interval IV reflects the loss of nanoparticles between the electrodes during the afterglow of the plasma pulse. The evolution of the nanoparticle generation determined from the τ-CRD measurements are further confirmed by additional scanning electron microscopy analyses on the nanoparticles created in the plasma pulse.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Zur Bestimmung des St?rkegehaltes in der Gerste und in anderen Getreidearten

Ohne Zusammenfassung     

Prädikatives und funktionales Denken in der Wahrscheinlichkeitsrechnung

In order to emphasize functional thinking in mathematical education, arguments are brought forward for an early and frequent use of tree diagrams in teaching stochastics. Since set and tree diagrams can be regarded as two sides of the same matter, Bayes’ theorem, which is strongly associated with predicative set diagrams, need not be dealt with explicitly any longer. Set diagrams are replaced by tree diagrams that are labelled in detail and by tree inversion as a functional instrument of dealing with conditioned probabilities. This technique is demonstrated by three typical problems in the context of conditioned probability. Finally, two letters by Pascal to Fermat are analysed in order to illustrate that predicative and functional approaches were already pursued in the early stages of probability calculus in the 17^th century.     

3rd International Conference on Trace Element Speciation in Biomedical,Nutritional and Environmental Sciences

3rd International Conference on Trace Element Speciation in Biomedical, Nutritional and Environmental Sciences