Effects of hydraulic pressure on the stability and transition of wetting modes of superhydrophobic surfaces

The underlying mechanisms of stability, metastability, or instability of the Cassie-Baxter and Wenzel wetting modes and their transitions on superhydrophobic surfaces decorated with periodic micropillars are quantitatively studied in this article. Hydraulic pressure, which may be generated by the water-air interfacial tension of water droplets or external factors such as raining impact, is shown to be a key to understanding these mechanisms. A detailed transition process driven by increasing hydraulic pressure is numerically simulated. The maximum sustainable or critical pressure of the Cassie-Baxter wetting state on a pillarlike microstructural surface is formulated for the first time in a simple, unified, and precise form. This analytic result reveals the fact that reducing the microstructural scales (e.g., the pillars' diameters and spacing) is probably the most efficient measure needed to enlarge the critical pressure significantly. We also introduce a dimensionless parameter, the pillar slenderness ratio, to characterize the stability of either the Cassie-Baxter or the Wenzel wetting state and show that the energy barrier for transitioning from the Cassie-Baxter to the Wenzel wetting mode is proportional to both the slenderness ratio and the area fraction. Thus, the Cassie-Baxter wetting mode may collapse under a hydraulic pressure lower than the critical one if the slenderness ratio is improperly small. This quantitative study explains fairly well some experimental observations of contact angles that can be modeled by neither Wenzel nor Cassie-Baxter contact angles and eventually leads to our proposals for a mixed (or coexisting) wetting mode.     

Scanning Kelvin Microscope: a new method for surface investigations

Based on the well known Kelvin probe for work function measurements a new microstructure analysis system - the Scanning Kelvin Microscope - has been developed. It allows to measure simultaneously with high lateral resolution the distribution of the contact potential difference (CPD) between a conductive sample and a reference probe together with the topographical structure of the sample surface. The measurement is contact free and non-destructive and can be carried out in natural environments. At present the lateral resolution of the measurement approaches 5 microm. The results can be displayed on a computer in three dimensional colour pictures.     

AFM and XRD investigation of crystalline vapor-deposited C60 films

The morphological and structural properties of C₆₀ films deposited on quartz substrates by sublimation at 320–500° C under high vacuum have been investigated using atomic force microscopy (AFM) and reflection X-ray diffraction (RXRD). The thickness of the films varied between 0.2 m and 10 m. AFM showed that the films consist predominantly of cubic crystals of a few micrometer in size with well-developed (111) and (100) faces. The crystallographic investigation revealed a strongly preferred [111] growth direction which is very sensitive to the deposition rate and substrate temperature. The influence of the experimental parameters on the morphology of the crystals and on the preferred orientation of the films is discussed in view of the AFM and RXRD results.     

Laser processing integrated into machine tools — design,applications, economy

In the last few years, lasers have found new applications in production engineering as tools for surface treatment, cutting, welding, drilling and marking. So far, the laser has mainly been used in special laser processing machines (laser-only) directly integrated into a production line or serving as stand-alone stations in the workshop. By combining conventional metal cutting technologies with laser processes in one machine, complete processing of a workpiece with different technologies in one setting can be realized. The main advantages are a reduction of the material flow between the production machines, which leads to a reduction in processing time and logistics, and an enhancement of manufacturing quality due to the processing in one setting. In addition to this approach, new processing technologies such as laser-assisted machining are possible.Applications of laser caving, hardening, welding and drilling of production parts in combination with the cutting process in one setting have been investigated with the aim of adapting these technologies to the characteristics of the machines and the typical parts spectra. Furthermore, various technical solutions for the integration of lasers into milling centres and lathes have been elaborated. In both situations the laser tool is handled like a standard tool and can be exchanged automatically. The main results will be reported, together with a brief discussion of the economic aspects of laser processing integrated into machine tools.This article is based on an invited paper presented at LANE '94, Erlangen, 12–14 October 1994.     

Determination of the atmospheric neutrino spectra with the Fréjus detector

The combined analysis of the final event set of data on neutrino interactions inside the detector, upward going stopping muons and horizontal muons recorded in the Fréjus experiment is presented. The absolute atmospheric neutrino spectra in the energy range for electron neutrinos and for muon neutrinos are determined. Based on the parameterization of Volkova for thev ^µ a spectral index of =2.66±0.05 is obtained from the ratio of horizontal muons over upward going stopping muons and from the measurement of the energy loss of horizontal muons inside the detector. The neutrino spectra are compared with various flux calculations. They do not show any evidence for neutrino oscillations in agreement with earlier analyses of the Fréjus data.Now atUniversity of Michigan, Ann Arbor, USA