The colloid-structure of semicrystalline low-density polyethylene

The length-distribution of stereoregular sequences in low-density polyethylene (LDPE) is determined by a computer-aided analysis of cp-melting curves within the framework of thermodynamics of eutectoid copolymers. Small-angle x-ray scattering patterns are then described by using the structure data derived. One of the results is that fluctuations of the mean electron-density are increasingly reduced with an increasing degree of crystallinity.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

XRD, conductivity and FTIR studies on LiI-Li2WO4-Li3PO4 prepared by low temperature sintering

Different amounts of Li₃PO₄ were mixed to a fixed ratio of LiI:Li₂WO₄, ground and pelletised before subjected to sintering at 70°C for 7 days. XRD shows that the product formed after sintering process is most likely Li₆P₄W₈O₃₂ due to peaks present at 10.6°, 22.4°, 24.0°, 24.4, 26.2°, 32.4° and 34.0°. Conductivity studies show that the sample with 25 wt.% Li₃PO₄ exhibits the highest room temperature conductivity of 3.42×10⁻³ Scm⁻¹. Conductivity is expected to occur through channel-like structures which could have formed due to corner or edge sharing of polyhedra. FTIR studies have shown the existence of WO₄ tetrahedra and WO₆ octahedral at 850 cm⁻¹ and 952 cm⁻¹, and phosphate tetrahedral at 564 cm⁻¹, 700 cm⁻¹, 890 cm⁻¹ and 1030 cm⁻¹.     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Problems, Models and Complexity. Part II: Application to the DLSP

In Part I of this study, we suggest to identify an operations research (OR) problem with the equivalence class of models describing the problem and enhance the standard computer-science theory of computational complexity to be applicable to this situation of an often model-based OR context. The Discrete Lot-sizing and Scheduling Problem (DLSP) is analysed here in detail to demonstrate the difficulties which can arise if these aspects are neglected and to illustrate the new theoretical concept. In addition, a new minimal model is introduced for the DLSP which makes this problem eventually amenable to a rigorous analysis of its computational complexity.     

Dielectronic Recombination of Very Heavy Lithiumlike Ions

Hyperfine Interactions - An overview of measurements of dielectronic recombination (DR) with the heaviest lithiumlike ions is presented. The experiments have been carried out at the heavy ion...     

Interface analysis of the system Si/YBa2Cu3O7?x

Summary The influence of different preparation conditions and substrate surface orientations on the superconducting properties of thin YBa₂Cu₃O_7–x (YBCO) films on silicon was studied. Comparative electrical and surface spectroscopic measurements were performed. SAM and SIMS depth profile analysis show an enrichment of barium at the interface between the superconductor and silicon for samples with T_c<76 K. Comparison with XPS data obtained for thin silicon films on YBCO indicates the formation of barium and yttrium silicates at the interface under these conditions.     

Anisotropic elastodynamics in a half space: An analytic method for polynomial data

An initial boundary value problem for the dynamic system of anisotropic elasticity in a half space is studied in the paper. A novel method of finding an exact solution of this problem for a special polynomial form of initial data and inhomogeneous term of the system is described. On the base of this method the simulation of elastic waves in different homogeneous anisotropic half spaces is implemented.     

Investigation of the chemical state of ultrathin Hf-Al-O films during high temperature annealing

Al₂O₃ incorporated HfO₂ films grown by atomic layer deposition (ALD) were investigated by high-resolution X-ray photoelectron spectroscopy (HRXPS). The core level energy state of a 15 Å thick film showed a shift to higher binding energy, as the result of a silicate formation and Al₂O₃ incorporation. The incorporation of Al₂O₃ into the HfO₂ film had no effect on silicate formation at the interface between the film and Si, while the ionic bonding characteristics and hybridization effects were enhanced compared to a pure HfO₂ film. The dissociation of the film in an ultrahigh vacuum (UHV) is effectively suppressed compared to a pure HfO₂ film, indicating an enhanced thermal stability of Hf-Al-O. Any dissociated Al₂O₃ on the film surface was completely removed into the vacuum by vacuum annealing treatment over 850 °C, while HfO₂ contributed to Hf silicide formation on the film surface.     

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested.