Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Cascade cyclizations via N,4-didehydro-2-(phenylamino)pyridine biradicals/zwitterions generated from enyne-carbodiimides

Thermolysis of the enyne-carbodiimides 7 having the central carbon-carbon double bond incorporated as part of the cyclopentene ring favors the formation of the corresponding N,4-didehydro-2-(phenylamino)pyridine intermediates, either as the sigma,pi-biradicals 8 or as the zwitterions 8', for subsequent synthetic elaborations. By placing appropriate substituents at the acetylenic terminus, a variety of the intramolecular decay routes are available for the initially formed sigma,pi-biradicals/zwitterions, leading to the 5,6-dihydrobenzo[c][1,8]naphthyridine 21, the 1,2,3,4-tetrahydro[1,8]naphthyridine 24 and related compounds 25 and 26, the 5,6-dihydrobenz[f]isoquinoline 28, and the benzofuro[3,2-c]pyridine 30. Surprisingly, the use of the dimethylamino group of the 2-(dimethylamino)phenyl substituent to capture the carbocationic center in the zwitterion 8e' furnished the 5H-pyrido[4,3-b]indole 32 in only 14% yield. The majority of the products were the 1H-pyrrolo[2,3-b]quinolines 34 and 35, isolated in 48 and 7% yields, respectively. However, it was possible to redirect the reaction toward 32 by conducting thermolysis of the enyne-carbodiimide 7e in the presence of 5 equiv of dimethylphenylsilyl chloride. Under this reaction condition, the 2-pyridone imine 37 was isolated in 86% yield, which on exposure to silica gel was converted to 32 in essentially quantitative yield. Thermolysis of the enyne-carbodiimide 42 having a methoxymethyl substituent at the acetylenic terminus led to the formation of 46' as a pyridine analogue of ortho-quinone methide imine. An intramolecular hetero-Diels-Alder reaction of 46' then furnished the tetrahydro[1,8]naphthyridino[2,1-c][1,4]benzoxazine 47.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Kinetic modeling of the adsorption rate of a gaseous adsorbate on a granular adsorbent by ultra-rapid-scanning Fourier transform infrared spectrometry

A novel method for determining the rates of adsorption of gaseous adsorbates on granular adsorbents in the millisecond time regime is described. Mixtures of the adsorbate and nitrogen are passed through a solenoid valve and 100 mg of the adsorbent for periods of (typically) 100 ms. The concentration of the adsorbate passing into a low-volume, long path length gas cell is measured with an ultra-rapid-scanning Fourier transform infrared spectrometer capable of gathering 200 mid-infrared spectra per second with 6-cm(-1) resolution. The pressure of the gas entering the cell is measured simultaneously with a capacitance manometer. A dynamic mathematical model was developed to analyze and describe the results in terms of a Langmuir isotherm. The success of this approach is demonstrated by the estimation of the rate of adsorption of vapor-phase acetaldehyde on aminopropylsilylated granular silica gel.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.     

S1P1-selective in vivo-active agonists from high-throughput screening: off-the-shelf chemical probes of receptor interactions, signaling, and fate

The essential role of the sphingosine 1-phosphate (S1P) receptor S1P(1) in regulating lymphocyte trafficking was demonstrated with the S1P(1)-selective nanomolar agonist, SEW2871. Despite its lack of charged headgroup, the tetraaromatic compound SEW2871 binds and activates S1P(1) through a combination of hydrophobic and ion-dipole interactions. Both S1P and SEW2871 activated ERK, Akt, and Rac signaling pathways and induced S1P(1) internalization and recycling, unlike FTY720-phosphate, which induces receptor degradation. Agonism with receptor recycling is sufficient for alteration of lymphocyte trafficking by S1P and SEW2871. S1P(1) modeling and mutagenesis studies revealed that residues binding the S1P headgroup are required for kinase activation by both S1P and SEW2871. Therefore, SEW2871 recapitulates the action of S1P in all the signaling pathways examined and overlaps in interactions with key headgroup binding receptor residues, presumably replacing salt-bridge interactions with ion-dipole interactions.     

Reactivity of benzoyl chlorides in nonionic microemulsions: potential application as indicators of system properties

The solvolysis reactivity of benzoyl chlorides entails a high sensitivity on medium properties. A systematic study of the reaction of a series of these substrates, varying the electron-withdrawing character of the substituent, has been performed in nonionic microemulsions. The kinetic effects due to variation of microemulsion compositions can be assigned to modifications in system properties, to be precise, to modifications in interface properties. Microemulsion properties that are obtained from kinetic analysis of solvolysis show a good agreement with the characterization of the microemulsion that was made via 1H NMR and solvatochromic fluorescence probes. Benzoyl chlorides with electron-donating groups react through a dissociative mechanism, whereas electron-withdrawing groups favor an associative mechanism. A comparative analysis of reactivity between the different substrates at the interface shows a variation in the contributions of both reaction pathways, associative and dissociative, to the whole reaction mechanism. The confined media shift the point where the mechanism changes from an associative to a dissociative pathway, far away from the turning point in water. Furthermore, the change in mechanism can be modulated by modification of the microemulsion composition.     

Excited states of porphyrin isomers and porphycene derivatives: a SAC-CI study

Excited states of free-base porphyrin isomers, porphycene (Pc), corrphycene (Cor), and hemiporphycene (hPc), were studied by the Symmetry-Adapted Cluster (SAC)/SAC-Configuration Interaction (CI) method. The absorption peaks of the porphyrin isomers were assigned on the basis of the SAC-CI spectra. The X, Y, X', and Y' bands of the porphyrin isomers, which have weak intensities, are identified. The differences in the Q-band absorptions among the isomers were clearly explained by the four-orbital model. In Cor and hPc, the wave function of the B-band corresponds to the mixture of the four-orbital excitations and the optically forbidden excitation of free-base porphin (P), due to the molecular symmetry lowering in the isomers. The B-band character is described by the five-orbital model in Pc and the six-orbital model in Cor and hPc. Two tetrazaporphycenes and two ring-extended (dibenzo) porphycenes were designed, and the Q-band transition moment was successfully controlled. These examples show that the control of the four-orbital energy levels is the guiding principle for pigment design in porphyrin compounds.     

Platanionosides D-J: megastigmane glycosides from the leaves of Alangium platanifolium (Sieb. et Zucc.) Harms var. platanifolium Sieb. et Zucc

From the leaves of Alangium paltanifolium var. platanifolium, collected in Fukuoka Prefecture, twelve further megastigmane glycosides were isolated. Seven of them, named platanionosides D-J (1-7), were found to be new compounds. Their structures were elucidated from spectroscopic evidence and their absolute structures were determined from beta-D-glucosylation-induced shift trends of 13C-NMR and by application of a modified Mosher's method.