AUTOMATED WIND TUNNEL MEASUREMENTS

It is common practice in power transmission to use bundled overhead electrical conductors because the lower rate of corona discharge, compared with single conductors, makes the bundle attractive for high voltages. However, secondary problems may arise from the vibrations induced by the aerodynamic forces which act on the leeward conductors as a result of their immersion in the wake of a windward conductor. Thus, in addition to possible aeolian and galloping oscillations observed for a single conductor, bundle conductors may also be subjected to wake-induced oscillations. ^1,2 Although extensive research has been done on the aeroelastic behavior of single and bundled conductors which are bare, little is known about the galloping or wake oscillation characteristics of given bundle conductors which, depending upon the environmental conditions during the formation of ice, may have five or so representative shaped cross-sections. One important task involves the aerodynamic quasi-static force and moment measurements in a wind tunnel using full scale conductor cross-sections each of which must be rotated through many angles at different spacings. Such measurements are repetitive as well as tediously time consuming and, hence, are beneficially automated. A reliable, accurate and inexpensive automated apparatus is described in this paper which permits the aerodynamic measurements to be performed efficiently and without intervention. Most importantly, it relieves the operator of the usual responsibility for manually controlling the separation and orientation of the sections as well as the need to manually compensate fluctuations in the free stream air speed. For simplicity, the apparatus is detailed in the context of a twin bundle conductor.     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Two- and three-dimensional analysis of bose-einstein correlations inπ +/K+p interactions at 250 GeV/c

The NA22 data onπ ^? π ^? correlations are analyzed in terms of a number of two- and three-dimensional parametrizations (Gaussian space-time, Goldhaber, Bowler string-like, Bertsch hydrodynamical, Kopylov-Podgoretskii, etc.). Contrary to the results obtained for e⁺e^? andµp collisions, the Goldhaber parametrization, as well as string-like models, fail in describing the hadron-hadron data. Better fits are obtained in the framework of surface-emitting fireball-like models, both when including and excluding hydrodynamical expansion of nuclear matter. Our results indicate that pion radiation occurs at earlier stages of matter evolution than in nuclear collisions.     

Oblique impingement of a circular jet in a cross flow

The distributions of temperature and dye concentration produced by a cross flow jet impinging on a flat surface are examined experimentally. Measurements show that for sufficiently high jet injection speeds, a ground vortex region upstream of the jet develops. The dimensionless gross geometrical features of this recirculating region are related by a simple linear law and are independent of the jet — surface spacing or the injection speed ratio.     

Coaxial Discharge and Transverse Magnetic Field

The study deals with the effect of an applied transverse magnetic field on the dynamics and parameters of the focused and expanded plasma in a coaxial discharge. The experimental results were found with a 3 kJ Plasma focus device of a Mather geometry. The discharge takes place in hydrogen gas with base pressure of 0.5 Torr. The experiments are conducted with a 10 kV bank voltage, which corresponds to 100 kA peak discharge current with rise time 8 μs. Helmholtz magnetic coils are placed outside the expansions chamber to produce a transverse magnetic field with intensity 280 G perpendicular to the plasma expanded from the coaxial electrodes. The investigations have shown that the plasma flow along the expansion chamber axis is restricted when applying the externally transverse magnetic field and the maximum axial velocity of the expanded plasma is decreased by 33%. X-ray probe has been used to measure the focused plasma electron temperature (T_e). The experimental results and the calculations showed that T_e is decreased from 2.2 keV to 800 eV with the application of a transverse magnetic field. The expanded plasma electron temperature and density have been measured by an electric double probe, the results cleared that the expanded plasma electron temperature is decreased by 2.6 times while its density is increased by 9 times, when a transverse magnetic field is applied.     

A method for investigating the orientational behaviour of fibrous particles in gaseous flow

A method is described by which the angular orientation distribution of fibrous particles carried in a gaseous stream may be investigated. The method is based upon the interpretation of the spatial intensity distribution or scattering profile of laser light scattered by individual fibres. The scattering instrument used to capture the profiles is described, and the mathematical computation required to ascertain the orientation of each particle at the measurement point is detailed. Illustrative results are given for a study of airborne micromachined silicon particles of 12 μm length and 1.0 μm by 1.5 μm cross-section. The method is currently being employed by the authors to investigate ways of improving the orientation control over nonspherical particles in systems such as aerodynamic particle sizers and particle shape classifiers, since lack of particle orientation control is known to adversely affect the measurement accuracy of both these types of instrument.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Influence of composition and annealing on the criteria of superparamagnetism and the interaction of particles in granular electrolytically deposited films of CuCo

Films of nonuniform Cu_100−xCo_x alloys with x = 6, 11, 20, and 35 at. %, obtained by electrolytic deposition, are investigated using quantum magnetometry in fields of up to 5.5 T and temperatures of 2–300 K. In all the compositions a characteristic feature is the deviation from pure superparamagnetic behavior, which increases as the annealing of the films and their cobalt content increase. Institute of Solid State and Semiconductor Physics. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 60–62, March, 1998.     

Thickness of a silica-tethered poly(ethylene oxide) layer measured by spin labeling

EPR spectroscopy of labeled poly(ethylene oxide) (PEO) grafted on silica has been used to characterize the conformation and local dynamics of the chains. Grafted molecules of MW 2000 with grafting ratios of 0.045, 0.057, 0.126, and 0.42 molecules/nm² were in contact with benzene. The mobility of the label was compared with that observed for solution of PEO from very diluted to highly concentrated and even bulk PEO. Thus, the concentration inside the grafted layer could be evaluated and also the thickness, which evolves rather linearly with the grafting ratio. © 1995 John Wiley & Sons, Inc.     

Investigation of surface topography, morphology and structure of amorphous carbon films by AFM and TEM

Morphology and structure of amorphous carbon films deposited with a pulsed arc source (LASER-ARC) have been studied using microscopical methods (SEM, TEM and AFM), electron diffraction and spectroscopical investigation (EELS). The parameters of the arc source and the deposition conditions (substrate temperature) influence morphology and structure of deposited amorphous carbon films. Especially the incorporation and growth of particles, embedded in the film have been investigated. By particle analysis using an optical microscope a majority of particles that is smaller than 500 nm has been determined. The morphology has been also demonstrated similar by AFM and TEM images. Their number and size of particles is strongly influenced by the deposition temperature. The structure of amorphous film is characterized by the EELS-spectra, but the particle structure was not detectable.