Poly(phenylene oxide) modified cyanate resin for self‐healing

Self‐healing cyanate ester resins (CE) were developed by adding low molecular weight poly(phenylene oxide) (PPO) resin, yielding a high performance CE/PPO system via a low‐temperature process. The addition of PPO improved the flexural strength and fracture toughness of the CE matrix without sacrificing thermal properties. CE/PPO formulations with 5, 10, and 15 wt.% PPO showed 43%, 65%, and 105% increase in fracture toughness due to a combination of crack deflection, crack pinning, and matrix cavitation around second‐phase particles. When PPO was introduced into the CE, dielectric properties were either unchanged or declined. During thermal treatment to heal damaged CE, liquid PPO flowed into cracks, and during subsequent cooling, solidified to bond the crack surfaces. The self‐healing efficiency for CE with 15 wt.% PPO after heating to 220°C for 1 h exhibited a recovery of 73% in toughness and 81% in microtensile strength. Copyright © 2014 John Wiley & Sons, Ltd.     

The synthesis and the bulk rheological properties of the highly-branched block polyethers

Several kinds of highly-branched block polyethers were synthesized via anion ring-opening polymerization of propylene oxide (PO) and ethylene oxide (EO), using phenol-amine resin (PA) as the initiator. The rheological properties determined by rotational rheometer all followed the regular rules of polymer systems: under a certain conditions, the bulk polyethers were pseudoplastic and non-Newtonian fluid, and with the increasing of the shear rate and temperature, the apparent viscosity of the block copolymers were reduced. In addition, modulus determination showed that such polyether molecules presented preferable viscosity compared to the elasticity, meanwhile, storage modulus, loss modulus and compound viscosity all decreased with the increasing of temperature. Storage modulus and loss modulus increased along with the scanning frequency increasing. But compared with the same kind of linear polymers, the significant difference was the low melt viscosity, which attributed to the special three-dimension space structure hindering the entanglement of chains. Furthermore, the rheological properties among the several block polyethers showed differences obviously. In other words, the number of block and the content of EO all have a significant effect on the rheological properties, specifically, the modulus will increase with the increasing of the block number and the EO content.     

Effect of Cofactor Folate on the Growth of Corynebacterium glutamicum SYPS-062 and l-Serine Accumulation

The direct fermentative production of l-serine from sugar has attracted increasing attention. Corynebacterium glutamicum SYPS-062 can directly convert sugar to l-serine. In this study, the effects of exogenous and endogenous regulation of cofactor folate on C. glutamicum SYPS-062 growth and l-serine accumulation were investigated. For exogenous regulation, the inhibitor (sulfamethoxazole) or precursor (p-aminobenzoate) of folate biosynthesis was added to the medium, respectively. For endogenous regulation, the gene (pabAB) that encodes the key enzyme of folate biosynthesis was knocked out or overexpressed to obtain the recombinant C. glutamicum SYPS-062 ΔpabAB and SYPS-062(pJC-tac-pabAB), respectively. The results indicated that decreased levels of cofactor folate supported l-serine accumulation, whereas increased levels of cofactor folate aided in cell growth of C. glutamicum SYPS-062. Thus, this study not only elucidated the role of folate in C. glutamicum SYPS-062 growth and l-serine accumulation, but also provided a novel and convenient approach to regulate folate biosynthesis in C. glutamicum.     

马尿酸分子印迹电化学传感器的制备及应用

采用超声法制备g-C3N4/NiO复合催化材料,将其滴涂在玻碳电极(GCE)表面构建g-C3N4/NiO/GCE催化电极。采用电聚合方法,以马尿酸为模板分子,邻苯二胺为功能单体构建M IP/g-C3N4/NiO/GCE传感器。采用时间-电流法对传感器制备条件优化。结果表明,复合催化材料对H2O2具有良好的催化效果。分子印迹传感器对马尿酸具有良好的选择性。在优化条件下,马尿酸质量浓度在0.05~2 mg/L范围内,电极电流响应与浓度呈良好的线性关系,检出限为7.1μg/L。将电极用于尿液中马尿酸的检测,回收率在87.3%~95.3%之间。     

氟喹诺酮-3-N-酰胺类衍生物的合成与抗肿瘤活性

为扩展氟喹诺酮由抗菌活性向抗肿瘤活性转化的结构修饰策略,利用药效团生物电子等排及其拼合和骨架迁越药物化学分子构建方法,以酰胺基作为氟喹诺酮C-3位羧基的生物电子等排体,氟喹诺酮骨架为酰胺基的功能修饰基,设计合成了氟喹诺酮-3-N-酰胺类目标化合物。其结构经元素分析和光谱数据确证。体外抗肿瘤实验结果表明,目标化合物对Hep-3B细胞和Capan-1细胞的抗增殖活性均显著强于母体环丙沙星的活性,尤其对Hep-3B细胞的抑制活性最强。因此,用酰胺基来替代C-3羧基有利于提高氟喹诺酮的抗肿瘤活性。     

液质联用中接口离子化新技术

液相色谱-质谱联用(简称液质联用,LC-MS)将色谱的高分离效能与质谱强大的结构测定功能结合,不仅实现了对复杂混合物更准确的定性定量分析,而且简化了样品的前处理过程,使样品分析更简便,在药物分析、食品与环境分析以及生物样品检测等众多领域得到了广泛的应用。作为LC-MS的核心组成部分,液质接口的作用是将LC的液体引入,发生电离,并将生成的离子传输进MS。因此,接口离子化技术的改进直接影响了LC-MS的发展和应用。为了获得更高的灵敏度和更广泛的适用性,研究人员一直致力于离子化技术的研究,以促进分析物的解吸,提高其电离和传输效率,减少基质效应的干扰。本文针对近年来LC-MS接口离子化技术的改进和发展,从离子化原理出发,对接口离子源的构造、影响电离的因素、以及相关的应用进行综述,探讨其优缺点,并对LC-MS接口离子化技术的发展趋势进行了展望。     

Potent Dual BET/HDAC Inhibitors for Efficient Treatment of Pancreatic Cancer

As one of the most aggressive and lethal human malignancies with extremely poor prognosis, there is an urgent demand of more effective therapy for the treatment of pancreatic cancer. Reported here is a new, effective therapeutic strategy and the design of small‐molecule inhibitors that simultaneously target bromodomain and extra‐terminal (BET) and histone deacetylase (HDAC), potentially serving as promising therapeutic agents for pancreatic cancer. A highly potent dual inhibitor ( 13 a ) is identified to possess excellent and balanced activities against BRD4 BD1 (IC₅₀=11 nm ) and HDAC1 (IC₅₀=21 nm ). Notably, this compound shows higher in vitro and in vivo antitumor potency than the BET inhibitor (+)‐JQ1 and the HDAC inhibitor vorinostat, either alone or and in combination, highlighting the advantages of BET/HDAC dual inhibitors for more effective treatment of pancreatic cancer.     

一种超导重力仪磁悬浮力的等效计算

为实现超导重力仪磁悬浮力的精确计算,以GWR型超导重力仪为模型基础,采用有限元的思想,将超导球表面电流理想化为多个等高共轴电流环,计算出各个电流环与超导线圈的作用力,求和得到线圈与超导球间的磁悬浮力。利用MATLAB完成计算程序实现,通过改变下线圈电流和上、下线圈电流比,获得满足一定条件的磁悬浮力及其梯度。选取合适的模型参数,计算出线圈对质量为m=4.069 g超导球的磁悬浮力大小为:Ftotal=3.988×10^-2N,磁悬浮力梯度为:-9.699×10^-3N/m,此时悬浮力梯度合适,满足系统稳定性和灵敏度的要求。     

氮化镓单晶的液相生长

氮化镓(GaN)具有高击穿场强、高饱和电子漂移速率、抗辐射能力强和良好的化学稳定性等优良特性,是制作宽波谱、高功率、高效率光电子、电力电子和微电子的理想衬底材料.除气相法(包括HVPE(氢化物气相外延)、MOCVD(金属有机化合物化学气相沉淀)、MBE(分子束外延))生长GaN单晶外,液相法(包括氨热法和助熔剂法)近几年在制备GaN单晶方面取得了较大的进展.本文介绍了氨热法和助熔剂法的生长原理、装备特点及生长习性;综述了两种液相生长方法的研究历程及研究进展,并对液相法生长GaN单晶的发展趋势及主要挑战进行了展望.     

复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。