Experiments in Solving Mixed Integer Programming Problems on a Small Array of Transputers

The time-consuming process of solving large-scale Mixed Integer Programming problems using the branch-and-bound technique can be speeded up by introducing a degree of parallelism into the basic algorithm. This paper describes the development and implementation of a parallel branch-and-bound algorithm created by adapting a commercial MIP solver. Inherent in the design of this software are certain ad hoc methods, the use of which are necessary in the effective solution of real problems. The extent to which these ad hoc methods can successfully be transferred to a parallel environment, in this case an array of at most nine transputers, is discussed. Computational results on a variety of real integer programming problems are reported.     

Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.     

Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

A new strategy for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system and its application to the efficient synthesis of BMS-238497, a novel and potent Lck inhibitor

A new efficient strategy was developed for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system. The new method involves condensation of o-nitroaniline with glyoxylate in methanol followed by treatment of the resulting alpha-(o-nitroanilino)-alpha-methoxy acetate with tosylmethyl isocyanide (TosMIC) reagent to give 1-(o-nitrophenyl)imidazole-5-carboxylate. Reductive cyclization of the nitro imidazole carboxylate afforded imidazo[1,5-a]quinoxalin-4-one in three steps and 60% overall yield. The new method was successfully applied to the synthesis of BMS-238497, a novel and potent Lck inhibitor.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。     

Speckle characteristics of simulated deep Fresnel region under shadowing effect

After the three-dimensional self-affine fractal random surface simulation, we use the optical scattering theory to calculate the deep Fresnel region speckle(DFRS) under consideration of the more strict shadowing effect. The evolution of DFRS with the scattering distance and the intensity probability distribution are studied. It is found that the morphology of the scatterer has an antisymmetric relationship with the intensity distribution of DFRS, and the effect of micro-lenses on the scattering surface causes the intensity probability distribution of DFRS to deviate from the Gaussian speckle in the high light intensity area.