Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

Analysis of a type of nonsmooth dynamical systems

In this paper, a class of nonsmooth dynamical systems is analyzed. Extensive simulations reveal the chaotic behavior in these systems. By introducing a parameter, a chain of systems with one end being a linear stable system and the other being a chaotic system is constructed. Then the phase transition process through the chain is investigated as the parameter varies. Difficulties involved in analyzing this class of systems are also discussed.     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

F+H2→HF+H反应的全量子态分辨的散射动力学研究

利用高灵敏度的氢原子里德堡飞渡时间谱方法研究了 F H_2→HF H 反应碰撞能在5.02kJ/mol 下的交叉分子束反应态态散射动力学.所有在时间飞渡谱中被观测到的谱峰可以归属为 HF 产物的振转态结构.还观测到了明显的 HF(v’=3)前向散射,以及少许的 HF(v’=2)前向散射.     

正已醇-邻、间、对二甲苯二元系固液相平衡

Melting temperatures have been measured and the solid-liquid phase diagrams constructed for 1-hexanol＋o-xylene, 1-hexanol＋m-xylene and 1-hexanol＋p-xylene. They are simple eutectic systems. Excess mole Gibbs free energies were calculated at 298.15K, showing larger positive deviations from ideal-solution behavior. The largest values of GmE are 711、 650 and 800 J•mol-1 for {o-C6H4(CH3)2＋C6H13OH}、 {m-C6H4(CH3)2 ＋ C6H13OH} and {p-C6H4(CH3)2＋C6H13OH} respectively.     

Toward breast cancer resistance protein (BCRP) inhibitors: design, synthesis of a series of new simplified fumitremorgin C analogues

In this study, we report the design and synthesis of a series of new simplified fumitremorgin C analogues. The preliminary biological study indicated some of these simplified fumitremorgin C might be developed into breast cancer resistance inhibitors.     

螯合型二甘醇钛酸酯的合成及其催化性能研究

报导了两种新的螯合型二甘醇钛酸酯的合成方法，进行了ＩＲ和ＵＶ鉴定，并作为酯化反应催化剂催化合成了邻苯二甲酸二辛酯。研究了酯化反应转化率与反应时间、反应温度及催化剂用量的关系，探讨了催化剂结构与催化性能的关系。     

Impact of azaproline on Peptide conformation

The amino acid analog azaproline (azPro) contains a nitrogen atom in place of the C(alpha) of proline. Peptides containing azPro were shown to stabilize the cis-amide conformer for the acyl-azPro bond and prefer type VI beta-turns both in crystals and in organic solvents by NMR. The increased stability for cis-amide conformers was relatively minor with respect to the trans-conformers. Further, their conformational preferences were depended on solvent. To elucidate the impact of azPro substitution on amide cis-trans isomerism and peptide conformation, this paper reports ab initio studies on azPro derivatives and a comparison with their cognate Pro derivatives: 1-acetyl-2-methyl pyrrolidine (1), 1-acetyl-2-methyl pyrazolidine (2), Ac-Pro-NHMe (3), Ac-azPro-NHMe (4), Ac-azPro-NMe(2) (5), Ac-azAzc-NHMe (6), and Ac-azPip-NHMe (7). Conformational preferences were explored at the MP2/6-31+G** level of theory in vacuo. Solvation effects for 1 and 2 were studied implicitly using the polarizable continuum model and explicitly represented by interactions with a single water molecule. An increase in the conformational preference for the cis-amide conformer of azPro was clearly seen. An intramolecular hydrogen bond occurred solely in the trans-amide conformer that reduced the preference for the cis-conformer by 2.2 kcal/mol. The larger ring homolog aza-pipecolic acid (azPip), in which this internal hydrogen bond was diminished, significantly augmented stabilization of the cis-amide conformer. In aqueous solution, the preference for the cis-amide conformers was greatly reduced, mainly as a result of interaction between water and the lone pair of the alpha-nitrogen in the trans-amide conformer that was 3.8 kcal/mol greater than that in the cis-conformer. In the azPro analog, the energy barrier for cis-trans amide isomerization was 6 kcal/mol less than that in the cognate Pro derivative. Because the azPro derivatives can stabilize the cis-amide bond and mimic a type VI beta-turn without incorporation of additional steric bulk, such a simple chemical modification of the peptide backbone provides a useful conformational constraint when incorporated into the structure of selected bioactive peptides. Such modifications can scan receptors for biological recognition of reverse turns containing cis-amide bonds by the incorporation of type VI beta-turn scaffolds with oriented appended side chains.     

高效液相色谱检测Zn（Ⅱ）、Cd（Ⅱ）、Co（Ⅱ）、Pb（Ⅱ）、Ni（Ⅱ）、Cu（Ⅱ）、Hg（Ⅱ）

用双-(2-羟乙基)二硫代甲酸铵(HEDC)在反相液相色谱中作检测某些金属离子的衍生化试剂，HEDC的金属螯合物微溶于水，可直接水样注射于C18柱中进行检测，范围为0．006～10mg／L相对偏差1％～2％，检测波长254nm，金属汞的整合物在HPLC分析前进行浓缩富集检测限可低至0．06～25μg／L，相对偏差小于2％。     

Stoichiometric and catalytic oxidations of alkanes and alcohols mediated by highly oxidizing ruthenium-Oxo complexes bearing 6, 6'-dichloro-2,2'-bipyridine

The ruthenium(II) complex cis-[Ru(6, 6'-Cl(2)bpy)(2)(OH(2))(2)](CF(3)SO(3))(2) (1) is a robust catalyst for C-H bond oxidations of hydrocarbons, including linear alkanes, using tert-butyl hydroperoxide (TBHP) as terminal oxidant. Alcohols can be oxidized by the "1 + TBHP" protocol to the corresponding aldehydes/ketones with high product yields at ambient temperature. Oxidation of 1 with Ce(IV) in aqueous solution affords cis-[Ru(VI)(6, 6'-Cl(2)bpy)(2)O(2)](2+), which is isolated as a green/yellow perchlorate salt (2). Complex 2 is a powerful stoichiometric oxidant for cycloalkane oxidations under mild conditions. Oxidation of cis-decalin is highly stereoretentive; cis-decalinol is obtained in high yield, and formation of trans-decalinol is not observed. Mechanistic studies showing a large primary kinetic isotope effect suggest a hydrogen-atom abstraction pathway. The relative reactivities of cycloalkanes toward oxidation by 2 have been examined through competitive experiments, and comparisons with Gif-type processes are presented.