Surface functionalization of electro-deposited nickel

A new in situ electrochemical method of functionalizing an oxide-free Ni surface is demonstrated using octanethiol. Initial adsorption results in a multilayer molecular film, which blocks both the hydrogen evolution reaction (HER) and re-oxidation of the Ni by ambient oxygen. However, excess octanethiol can be removed by rinsing with ethanol, leaving behind a monolayer that continues to protect against re-oxidation but gives rise to an unexpected enhancement in the HER, with a greater enhancement for longer film formation times. The presence of an octanethiol monolayer on the surface was confirmed by spectroscopic observation of the CH(2), CH(3) and thiolate groups using infra red spectroscopy, while X-ray photo-electron spectroscopy demonstrated the effectiveness of the thiol layer as a barrier to surface oxidation. The electrochemically prepared octanethiol film impedes oxidation of the Ni in air more effectively than a film formed by immersion in a solution of octanethiol in ethanol.     

Solvation and aggregation of n,n'-dialkylimidazolium ionic liquids: a multinuclear NMR spectroscopy and molecular dynamics simulation study

The solvation and aggregation of the ionic liquid (IL) 1-n-butyl-3-methylimidazolium chloride ([C4mim]Cl) in water and dimethylsulfoxide (DMSO) were examined by analysis of (1)H and (35/37)Cl chemical shift perturbations and molecular dynamics (MD) simulations. Evidence of aggregation of the IL n-butyl chains in aqueous environments at IL concentrations of 75-80 wt% was observed both in the NMR experiments and in the MD simulations. The studies also show that [C4mim]Cl behaves as a typical electrolyte in water, with both ions completely solvated at low concentrations. On the other hand, the data reveal that the interactions between the [C4mim](+) and Cl(-) ions strengthen as the DMSO content of the solutions increases, and IL-rich clusters persist in this solvent even at concentrations below 10 wt%. These results provide an experimentally supported atomistic explanation of the effects that these two solvents have on some of the macroscopic properties of [C4mim]Cl. The implications that these findings could have on the design of IL-based solvent systems are briefly discussed.     

Classification of vegetable oils according to their botanical origin using amino acid profiles established by direct infusion mass spectrometry

Amino acid profiles, established by direct infusion mass spectrometry, have been used to classify vegetable oils according to their botanical origin. The proteins present in hazelnut, sunflower, corn, soybean, olive, avocado, peanut and grapeseed oils were precipitated with acetone, and the residue was hydrolyzed in acid medium, diluted in a hydrochloric acid/ethanol mixture, and infused into the mass spectrometer. The spectra of the hydrolyzed protein extracts showed [M+H]+ ions of the following amino acids: glycine, alanine, serine, proline, valine, threonine, cysteine, isoleucine + leucine, aspartic acid, lysine, glutamic acid, methionine, histidine, phenylalanine, arginine and tyrosine. These ions were used to construct linear discriminant analysis (LDA) models. The ratios of the ion signal intensities selected by pairs were used as predictors. With the sequential application of three LDA models, the eight botanical origin categories of the samples were well resolved.     

Two-photon absorption in aqueous micellar solutions

Addition of the surfactant sodium dodecyl sulfate at concentrations above the critical micelle concentration increases the fluorescence quantum yield and the two-photon absorption cross-section of charged [2.2]paracyclophane chromophores containing pairs of D-pi-D chromophores. The resulting spectra in the micellar solutions are very similar to those obtained for neutral isostructural analogues in toluene. The measured etadelta values are 1300 GM for 1C and 1920 GM for 2C, which are comparable or larger to those in toluene. These results highlight possible misleading interpretation of two-photon-induced emission for evaluating the concentration of labeled substrates used in two-photon microscopy and provide guidelines for designing molecular structures with optimized two-photon action cross-sections in water.     

Synthesis and characterisation of a silicon oxide film solid-phase extraction system for lead traces determination: an all the way green analytical method

In this work, an all the way green analytical procedure based on a silicon oxide film-solid phase extraction system is proposed for lead traces determination. From the synthesis of a solid phase extraction (SPE) system and throughout the metal preconcentration and determination only aqueous media were employed. Characterisation of the film was carried out by Scanning Electron Microscopy and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy. Preconcentration conditions, prior to Pb(II) Electrothermal Atomic Absorption Spectrometry (ETAAS) determination, such as adsorption and desorption time, pH and temperature, were optimised. Langmuir, Freundlich and Dubinin-Radushkevich isotherm models were analysed along with the evaluation of adsorption energy and standard free energy (ΔG ⁰). The greatest adsorption was obtained with incubation at pH 7 and 37°C. By using a small volume of 0.5?mol?L^?1 HNO₃ (0.5?mL) lead was desorbed from the silicon oxide film after 2?h incubation, generating low amount of waste. The films showed better adjustment for the Langmuir model (R^{2 ?}=?0.989). The detection limit (3.29σ) for Pb(II) was 0.228?µg?L^?1. The developed procedure is 10-fold more sensitive in comparison to direct ETAAS determination. Recovery values from soft tap-water and soft well-water were above 95%. When hard water was analysed, Pb(II) adsorption was found to be interfered by Mg²⁺ and Ca²⁺. After five preconcentration cycles relative recovery was found not to decay below 90%, indicating that the silicon oxide film could be used for multiple lead determinations.     

Neutral p-cymene ruthenium complexes with P-stereogenic monophosphines. New catalytic precursors in enantioselective transfer hydrogenation and cyclopropanation

A family of eight neutral, pseudotetrahedral piano-stool ruthenium complexes C, of the type [RuCl₂(p-cymene)(PArPhR)] (Ar = 1-naphthyl, 9-phenanthryl and 2-biphenylyl; R = Me, i-Pr, OMe, –CH₂SiMe₃ and –CH₂SiPh₃) have been prepared and characterised, including the X-ray crystal structure for C6 (Ar = 2-biphenylyl; R = i-Pr). These complexes catalyse the asymmetric hydrogen transfer reaction of acetophenone in refluxing 2-propanol in the presence of potassium tert-butoxyde, reaching full conversions and up to 45% ee after 24 h towards the S enantiomer of 1-phenylethanol. Cationic complexes formed upon treatment of C with one equivalent of AgSbF₆ or (Et₃O)PF₆ are active in the cyclopropanation reaction of styrene and α-methylstyrene by ethyl diazoacetate. Low to moderate conversions (up to 58%), diastereoselectivities (up to 40% de), and moderate enantioselectivities (up to 69% ee) have been found. For both reactions, bulky complexes and C6 in particular lead to the best results.     

Polyvinyl Alcohol–Pectin Cryogel Films for Controlled Release of Enrofloxacin

The release of enrofloxacin entrapped in polyvinyl alcohol (PVA) cryogel at pH?5.5 showed a first-order kinetic, releasing 69.7% of the antibiotic after 4.5?h at 37?°C. In order to slow down the fluoroquinolone release rate, high-methoxylated pectin was added into the cryogel (PVA?CP). A film containing 1.0% (w/v) HM pectin and 5.0???g/ml enrofloxacin released only 3.7% of the antibiotic after 4.5?h. Since the FTIR spectrum showed that most of the interactions between PVA?CP matrix and enrofloxacin were due to polar groups (carboxylate and amine), a two-layer film system was designed to modulate the releasing rate of the drug. The top film equilibrated with 0.75 or 1.5?M NaCl release up to 41.9% and 89.0% of the enrofloxacin in 4?h, respectively. The release rate of enrofloxacin was found dependent on NaCl concentration in the upper gel layer. The two-layer cryogel system showed attractive features for transcutaneous antibiotic delivery.     

Recent Insights Into the Biomedical Applications of Shape‐memory Polymers

Shape‐memory polymers (SMP) are versatile stimuli‐responsive materials that can switch, upon stimulation, from a temporary to a permanent shape. This advanced functionality makes SMP suitable and promising materials for diverse technological applications, including the fabrication of smart biomedical devices. In this paper, advances in the design of SMP are discussed, with emphasis on materials investigated for medical applications. Future directions necessary to bring SMP closer to their clinical application are also highlighted.

     

Production,purification, and characterization of a low-molecular-mass xylanase from Aspergillus sp. and its application in baking

An extracellular xylanase produced by a Mexican Aspergillus strain was purified and characterized. Aspergillus sp. FP-470 was able to grow and produce extracellular xylanases on birchwood xylan, oat spelt xylan, wheat straw, and corncob, with higher production observed on corncob. The strain also produced enzymes with cellulase, amylase, and pectinase activities on this substrate. A 22-kDa endoxylanase was purified 30-fold. Optimum temperature and pH were 60 degrees C and 5.5, respectively, and isoelectric point was 9.0. The enzyme has good stability from pH 5.0 to 10.0, retaining >80% of its original activity within this range. Half-lives of 150 min at 50 degrees C and 6.5 min at 60 degrees C were found. K(m) and activation energy values were 3.8 mg/mL and 26 kJ/mol, respectively, using birchwood xylan as substrate. The enzyme showed a higher affinity for 4-O-methyl-D-glucuronoxylan with a K(m) of 1.9 mg/mL. The enzyme displayed no activity toward other polysaccharides, including cellulose. Baking trials were conducted using the crude filtrate and purified enzyme. Addition of both preparations improved bread volume. However, addition of purified endoxylanase caused a 30% increase in volume over the crude extract.     

Conformation and luminescence of isolated molecular semiconductor molecules

In this article, we describe, for the first time, direct comparisons of the detailed structures of two small molecule organic semiconductors, oligo(phenylenvinylene) (OPV) molecules with chains of five and six phenyl rings (5R-OC(8)H(17) and 6R-OC(8)H(17)), respectively, and their luminescence properties on a single molecule level. Our data originate from a combination of two powerful diagnostic tools in physical chemistry: ion mobility and single molecule fluorescence spectroscopy. These techniques enable us to precisely determine the shapes of isolated molecules in the gas phase and to correlate these structures to the emission from single molecules supported on bare glass substrates. The principal structural uncertainty in OPVs is the (possible) presence and location of cis-vinylene linkages (cis-defects) in the oligomer. The results show that the structures observed in the gas phase are strongly correlated to the categories of molecules observed in the single molecule polarization anisotropy measurements with nearly identical distributions for the two OPV molecules studied. Each category is also characterized by the luminescence efficiency of the molecules in each class, providing a direct correlation between the luminescence efficiency and the shape of the molecule. This combination of techniques provides a level of information far beyond that obtained via any other analytical technique.