Quantitative determination of CGS 18102A, a new anxiolytic, in human plasma using capillary gas chromatography/mass spectrometry.

CGS 18102A is a novel hexahydrobenzopyranopyridine that has a mixed pharmacological profile of 5-HT-1A agonist and 5-HT-2 antagonist properties. Based upon these mechanisms, the compound is predicted to have anxiolytic efficacy with possible efficacy in depression. Preclinical studies in the rat have shown the drug to be well absorbed and extensively metabolized. Because of the anticipated low plasma levels in humans a gas chromatography/mass spectrometry (GC/MS) analytical method has been developed and validated to determine plasma concentrations of CGS 18102A in early clinical studies. The method utilizes CGS 18416A as the internal standard. Samples (1 mL) were extracted with pentane:ethyl acetate (75:25, v:v). Extracts were then concentrated and analysed directly by GC/MS. Separation was accomplished on a methylsilicone capillary column (30 m x 0.32 mm i.d.). GC/MS was carried out under positive ion ammonia CI conditions, with selected ion monitoring of the [M + H]+ ions (m/z = 262 and 248) for CGS 18102A and CGS 18416A, respectively. The method was successively applied to the analysis of clinical samples from an ascending multidose safety and tolerability study conducted in six normal healthy male volunteers.     

Multicommutation flow techniques in the hydride generation-atomic fluorescence determination of arsenic

This review outlines automated methodologies developed for measuring arsenic in environmental samples. We report the state of the art of the most significant methods exploiting multicommutation flow techniques coupled to hydride generation-atomic fluorescence determination. We review analytical methods used and present a comparative evaluation of them. We also discuss the on-line pre-concentration procedure as being of particular interest in the development of fully automated methods.     

Two-dimensional packing of short DNA with nonpairing overhangs in cationic liposome-DNA complexes: from Onsager nematics to columnar nematics with finite-length columns

We report the formation of liquid crystalline (LC) phases of short double-stranded DNA with nonpairing (nonsticky) overhangs, confined between two-dimensional (2D) lipid bilayers of cationic liposome-DNA complexes. In a landmark study (Science2007, 318, 1276), Nakata et al. reported on the discovery of strong end-to-end stacking interactions between short DNAs (sDNAs) with blunt ends, leading to the formation of 3D nematic (N) and columnar LC phases. Employing synchrotron small-angle X-ray scattering, we have studied the interplay between shape anisotropy-induced and DNA end-to-end interaction-induced N ordering for 11, 24, and 48 bp sDNA rods with single-stranded oligo-thymine (T) overhangs modulating the end-to-end interactions. For suppressed stacking interactions with 10-T overhangs, the volume fraction of sDNA at which the 2D isotropic (I)-to-N transition occurs for 24 and 48 bp sDNA rods depended on their length-to-width (L/D) shape anisotropy, qualitatively consistent with Onsager's theory for the entropic alignment of rigid rods. As the overhang length is reduced from 10 to 5 and 2 T for 24 and 48 bp sDNA, the N-to-I transition occurs at lower volume fractions, indicating the onset of some degree of end-to-end stacking interactions. The 11 bp sDNA rods with 5- and 10-T overhangs remain in the I phase, consistent with their small shape anisotropy (L/D ≈ 1.9) below the limit for Onsager LC ordering. Unexpectedly, in contrast to the behavior of 24 and 48 bp sDNA, the end-to-end interactions between 11 bp sDNA rods with 2-T overhangs set in dramatically, and a novel 2D columnar N phase (N(C)) with finite-length columns formed. The building blocks of this phase are comprised of 1D stacks of (on average) four 11 bp DNA-2T rods with an effective L(stacked)/D ≈ 8.2. Our findings have implications for the DNA-directed assembly of nanoparticles on 2D platforms via end-to-end interactions and in designing optimally packed LC phases of short anisotropic biomolecules (such as peptides and short-interfering RNAs) on nanoparticle membranes, which are used in gene silencing and chemical delivery.     

On the way to understand antioxidants: chromanol and dimethoxyphenols gas-phase acidities

Some antioxidant mechanisms displayed by several phenolic compounds relate with OH bond dissociation energy. One way for its determination, in the gas-phase, relies on acidity measurements. Gas-phase acidities were determined experimentally, applying the kinetic method, for chromanol and four dimethoxyphenols, and theoretically through quantum chemical DFT calculations for chromanol, six dimethoxyphenols and 3,4,5-trimethoxyphenol. The experimental acidity order, 2,3-dimethoxyphenol > 3,5-dimethoxyphenol > 2,6-dimethoxyphenol > 3,4-dimethoxyphenol ≈ phenol > chromanol shows good agreement with the theoretical acidity order, 2,5-dimethoxyphenol > 2,3-dimethoxyphenol > 3,4,5-trimethoxyphenol > 3,5-dimethoxyphenol ≈ 2,4-dimethoxyphenol > 2,6-dimethoxyphenol > 3,4-dimethoxyphenol > phenol > chromanol. These acidity trends were rationalized in terms of the substituent effects on the thermodynamic stabilities both of the parent phenols and the corresponding phenoxide ions. DFT calculations also evidenced the occurrence of intramolecular C-H···O hydrogen bonds whenever there are vicinal substituents (either OH, O(-) or OCH(3)) which induce further stabilization of the geometries.     

Antioxidant capacity and larvicidal and antifungal activities of essential oils and extracts from Piper krukoffii

The leaves and twigs of Piper krukoffii, collected in the Carajás National Forest, north Brazil, yielded essential oils (2.0% and 0.8%), the main constituents of which were myristicin (40.3% and 26.7%), apiole (25.4% and 34.1%) and elemicin (2.8% and 3.0%). The antioxidant activities of the oils, methanol extract and its sub-fractions were evaluated. The DPPH EC50 values varied from the ethyl acetate sub-fraction (73.4 +/- 3.7 microg/mL) to the methanol extract (24.9 +/- 0.8 microg/mL), and the ABTS TEAC values ranged in the same order from 265.7 to 349.2 microMol TE/g. These results indicated a significant antioxidant activity for the plant. The lignans (-)-kusunokin, yatein, (-)-hinokin and cubebin were identified in the methanol extract. The hydro-methanolic sub-fraction showed a high value for total phenol content (106.5 +/- 0.7 mg GAE/g), as well as 1H NMR signals for sugar moieties. Crude extracts and sub-fractions were also able to inhibit beta-carotene bleaching, varying from 22.4 to 47.1%. The oils from the leaves and twigs showed strong larvicidal (21.4 and 3.6 microg/mL) and fungicide (0.5 and 0.1 microg/mL) activities.     

Variability in the Chemical Composition of Myrcia sylvatica (G. Mey) DC. Essential Oils Growing in the Brazilian Amazon

Myrcia sylvatica (G. Mey) DC. is known as “insulin plant” because local communities use the infusions of various organs empirically to treat diabetes. The leaves of seven specimens of Myrcia sylvatica (Msy-01 to Msy-07) were collected in the Brazilian Amazon. Furthermore, the essential oils were extracted by hydrodistillation and analyzed by gas chromatography coupled to mass spectrometry, and their chemical compositions were submitted to multivariate analysis (Principal Component Analysis and Hierarchical Cluster Analysis). The multivariate analysis displayed the formation of four chemical profiles (chemotypes), described for the first time as follows: chemotype I (specimen Msy-01) was characterized by germacrene B (24.5%), γ-elemene (12.5%), and β-caryophyllene (10.0%); chemotype II (specimens Msy-03, -06 and -07) by spathulenol (11.1–16.0%), germacrene B (7.8–20.7%), and γ-elemene (2.9–7.6%); chemotype III (Msy-04 and -05) by spathulenol (9.8–10.1%), β-caryophyllene (2.5–10.1%), and δ-cadinene (4.8-5.6%); and chemotype IV, (Msy-02) by spathulenol (13.4%), caryophyllene oxide (15.0%), and α-cadinol (8.9%). There is a chemical variability in the essential oils of Myrcia sylvatica occurring in the Amazon region.     

Evaluation of Genotoxicity and Toxicity of Annona muricata L. Seeds and In Silico Studies

Cancer is a multifactorial organic dysfunction for which great efforts are being devoted in searching for new treatments and therapeutic adjuvants. Annona muricata is a fruit that has promising activity against several types of cancer, as it contains acetogenins, the metabolite group associated with this action. Thus, the objective of this study was to evaluate, in experimental models, the toxic behavior of an extract and fraction rich in acetogenins from A. muricata seeds and study the acetogenin, Annonacin, in silico. Phytochemical characterization was made by thin layer chromatography, spectroscopy in the infrared region and nuclear magnetic resonance. Toxicity was evaluated by tests of Allium cepa and Artemia salina, and in silico studies using the SwissDock servers DockThor, PharmMapper, ADMETLab, PreADME, Osiris and ProTox. The extract and fraction showed genotoxic activity against meristematic cells of A. cepa, reducing the mitotic index; however, the extract produced great deleterious effects on the system, even causing cell necrosis. In A. Saline, the extract was more toxic than the fraction, but both samples were considered toxic. Annonacin was effectively linked to complex I, and presented different activities regarding toxicity. Thus, the results of this study are promising, highlighting the anticancer potential of acetogenins.     

Transformation of Residual Açai Fruit (Euterpe oleracea) Seeds into Porous Adsorbent for Efficient Removal of 2,4-Dichlorophenoxyacetic Acid Herbicide from Waters

Brazil’s production and consumption of açai pulp (Euterpe oleracea) occur on a large scale. Most of the fruit is formed by the pit, which generates countless tons of residual biomass. A new purpose for this biomass, making its consumption highly sustainable, was presented in this study, where activated carbon (AC) was produced with zinc chloride for later use as an adsorbent. AC carbon formed by carbon and with a yield of 28 % was satisfactorily used as an adsorbent in removing the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Removal efficiency was due to the highly porous surface (Vp = 0.467 cm³ g⁻¹; Dp = 1.126 nm) and good surface área (SBET = 920.56 m² g⁻¹). The equilibrium data fit the Sips heterogeneous and homogeneous surface model better. It was observed that the increase in temperature favored adsorption, reaching a maximum experimental capacity of 218 mg g⁻¹ at 328 K. The thermodynamic behavior indicated a spontaneous, favorable, and endothermic behavior. The magnitude of the enthalpy of adsorption was in agreement with the physical adsorption. Regardless of the herbicide concentration, the adsorbent displayed fast kinetics, reaching equilibrium within 120 min. The linear driving force (LDF) model provided a strong statistical match to the kinetic curves. AC with zinc chloride (ZnCl₂), created from leftover açai biomass, is a potential alternative as an adsorbent for treating effluents containing 2,4-D.