The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Vibrational analysis of chlorinated methylphosphonic acids: Part 2. Vibrational analysis of CHCl2PO3H2 and its anions

The vibrational spectra (IR and Raman) of CHCl₂PO₃H₂ and its anions in H₂O and D₂O solutions are reported. The IR spectra of the solid dibasic sodium and potassium salts, the solid normal and O-deuterated monobasic sodium and potassium salt and the solid normal and O-deuterated acid are discussed. The principal results of the normal coordinate analysis of the compounds are tabulated.     

Chemical studies of carbohydrates. Part I. Conversion of derivatives of glucose and allose into pyrazoles and pyridazines

On reaction of 1,2:5,6-di-O-isopropylidenc-3-O-(p-tolylsulfonyl)-α-D-glueofuranose ( 1 ) with hydrazine hydrate at 140° besides formation of 3-deoxy-3-hydrazino-1,2:5,6-di-O-isopropylidene-α-D-allofuranose ( 2 ) and 3-dcoxy-1,2:5,6-di-O-isopropylidene-α-D-erythro-hex-3-enofuranose ( 3 ), ring transformation into 3-[4′-(2′,2′-dimethyl-1′,3′-dioxolanyl)]pyridazine ( 4 ) takes place. At 170°, however, only 2 and 4 are formed, indicating that 3 is the precursor of 4. Treatment of 3 with hydrazine hydrate at 170° indeed gives a nearly quantitative ring expansion into 4. Treatment of 3-dcoxy-3-hydrazino-1,2:5,6-di-O-isopropylidenc-α-D-glucofuranose ( 8 ) as well as the stereoisomeric allofuranose 2 with concentrated hydrochloric acid gives a nearly quantitative ring interconversion into 3-(D-erythro-trihydroxypropyl)pyrazole ( 9 ).     

Reactions of (di)manganese carbonyl ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN) in the gas phase

The gas-phase reactions of a series of (di)manganese carbonyl positive ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me(3)TACN) have been examined with the aid of Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. The monomanganese carbonyl ions, [Mn(CO)(n)](+) (n = 2-5), react predominantly by ligand exchange and to a minor extent by electron transfer with the formation of the radical cation of Me(3)TACN. For the [Mn(CO)(n)](+) (n = 2-4) ions, the ligand exchange results in the exclusive formation of a [Mn(Me(3)TACN)](+) complex, whereas small amounts of [Mn(CO)(Me(3)TACN)](+) ions are also generated in the reactions of the [Mn(CO)(5)](+) ion. The [Mn(2)(CO)(n)](+) ions (n = 2, 4 and 5) react also by competing electron transfer and ligand exchange. The reaction of the [Mn(2)(CO)(2)](+) and [Mn(2)(CO)(4)](+) ions is associated with cleavage of the Mn--Mn bond as evidenced by the pronounced formation of [Mn(Me(3)TACN)](+) ions. For [Mn(2)(CO)(5)](+), the ligand exchange leads mainly to the formation of [Mn(2)(CO)(n)(Me(3)TACN)](+) (n = 1-3) ions. These primary product ions react subsequently by the incorporation of a second Me(3)TACN molecule to afford [Mn(2)(CO)(Me(3)TACN)(2)](+) and [Mn(2)(CO)(2)(Me(3)TACN)(2)](+) ions. Both of these latter species incorporate an oxygen molecule with formation of ions with the assigned composition of [Mn(2)(O(2))(CO)(Me(3)TACN)(2)](+) and [Mn(2)(O(2))(CO)(2)(Me(3)TACN)(2)](+).     

Studies on borate esters 1 : The ph dependence of the stability of esters of boric acid and borate in aqueous medium as studied by 11B NMR

The pH dependent stability of esters of boric acid and borate with glycol, glycolic acid, oxalic acid and glyceric acid as dihydroxy compounds has been studied. ¹¹B NMR provides a suitable analytical tool for the quantitative determination and structure elucidation of the various esters in aqueous medium. The pH dependent stability of esters of boric acid and borate is formulated in a general rule of thumb: esters of boric acid and borate with dihydroxy compounds in aqueous medium show the highest stability at that pH where the sum of the charges of the free esterifying species is equal to the charge of the ester.     

Application of the FCP-activation procedure to the synthesis of a biospecific adsorbent for trypsin

The synthesis of a biospecific adsorbent for trypsin was chosen as a model to investigate the applicability of FCP activation in affinity chromatography.p-Aminobenzamidine was chosen as a ligand, directly suitable for immobilization. The nonspecific binding properties of the first series of synthesized agarose derivatives were obviated either by FCP activation of the ligand instead of the matrix, or by modifying the initial FCP-activation procedure. The adsorbents prepared in this way, however, demonstrated no selectivity between trypsin and chymotrypsin. The introduction ofe-aminocaproic acid as a spacer was ineffectual. These problems were solved by the application of glycylglycine as a spacer. The final affinity matrices had a degree of substitution of approximately 4 μ.mol of ligand per gram gel (100 μmol ligand per gram dry adsorbent). The specific activity of a current trypsin preparation was increased by 58% in a single cycle. The biospecificity of these adsorbents was demonstrated.     

Alignment of molecules in pulsed resonant laser fields

We investigate by numerical simulations the dynamics of alignment of linear molecules in resonant pulsed laser fields and its dependence on pulse length, field strength, and molecular parameters. We propose an analytical short-time approximation for the time-dependent wave packets. We provide a theoretical basis for the occurrence of saturation in the rotational pumping. We present a formula to predict the time at which the maximum alignment occurs. We discuss the magnitude of the laser-induced alignment and we relate it to a theoretical upper limit.     

Using optimized collision energies and high resolution,high accuracy fragment ion selection to improve glycopeptide detection by precursor ion scanning

Glycosylation is the most widespread protein modification and is known to modulate signal transduction and several biologically important interactions. In order to understand and evaluate the biological role of glycosylation it is important to identify the glycosylated protein and localize the site glycosylation under particular biological conditions. To identify glycosylated peptides from simple mixtures, i.e., in-gel digests from single SDS PAGE bands we performed high resolution, high accuracy precursor ion scanning using a quadrupole TOF instrument equipped with the Q(2) pulsing function. The high resolving power of the quadrupole TOF instrument results in the selective detection of glycan specific fragment ions minimizing the interference of peptide derived fragment ions with the same nominal mass. Precursor ion scanning has been previously described for these glycan derived ions. However the use of this method has been limited by the low specificity of the method. The analysis using precursor ion scanning can be applied to any peptide mixture from a protein digest without having previous knowledge of the glycosylation of the protein. In addition to the low femtomole (nanomolar) detection limits, this method has the advantage that no prior derivatization or enzymatic treatment of the peptide mixtures is required.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.