Electrocatalytic activity of binary Palladium Ruthenium anode catalyst on Ni-support for ethanol alkaline fuel cells

In search for a cheaper anode catalyst for the oxidation of ethanol for development of direct alcohol fuel cells, Pd has been considered here as an interesting substitute for Pt in Pt Ru binary electrodeposite. The binary catalyst when co-deposited on nickel support has been found to increase the current density and decrease the anodic overvoltage significantly with respect to pure Pt, Pd and Ni. Its electrocatalytic capability is also comparable with that of the Pt-Ru binary electrocatalyst on Ni-support, when studied in 1 M EtOH containing 1 M NaOH solution. The effect of loading of Pd Ru electrocatalyst on Ni support has also been tested. The electrocatalytic activity of the electrodes for oxidation of ethanol has been explained by studies of cyclic voltammetry, chronopotentiometry, steady-state polarization, and conjugated scanning electron microscopy–energy dispersion X-ray spectroscopy. It has been found that electrode containing the higher amount of deposit are less affected by carbonaceous poisons.     

Condensation of 4-aryl-4-oxobutanoic acids with benzylamines: Synthetic and structural studies on 1-arylmethyl-3-[(<Emphasis Type="Italic">E</Emphasis>)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-2-pyrrolones

The microwave-mediated reaction of 4-aryl-4-oxobutanoic acids with benzylamines furnished 1-arylmethyl-3-[(E)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-pyrrolones. This result is in contract to the earlier report on this reaction conducted under neat conditions. Structures for the products were assigned on the basis of spectral data and confirmed by independent synthesis. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 368–373, March, 2007.     

Verflüchtigung von Spaltproduktjod aus Festem UCl4

It is possible to volatilize about 95% (at temperatures between 200°C and 600°C) of the iodine, which has been produced by irradiating solid UCl₄ with thermal neutrons. The delay times for iodine are decreasing from 2 hrs (at 200°C) to 7 sec (at 600°C). The release of the iodine is improved by using an inert carrier gas. When adding AgCl to the UCl₄ before irradiation is carried out, the release of iodine is suppressed at temperatures lower than 400°C. The adding of KI leads to a more rapid release of iodine at low temperatures.      

Vibrational and lifetime line broadenings in ESCA

The line profile of the narrow, symmetric 1s line from neon, recorded with the new ESCA instrument with X-ray monochromatization, is analyzed. The natural linewidth of this line is found to be 0.23 ± 0.02 eV, in good agreement with theoretical calculations of the oscillator strengths for Auger transitions and X-ray emission. Spectra from molecules show frequently asymmetric core electron lines under high resolution. This rules out previous explanations based on a chemical influence on the natural lifetime. Contrary to earlier assumptions, vibrational excitations are shown to be important in core electron spectra. For methane, the vibrational energy spacing is large enough to allow the vibrational lines to be partly resolved. Recent results from accurate PNO CI calculations on methane agree well with the experimental findings. The Franck-Condon transitions in the C1s and N1s lines from CO and N₂ are shown to be well described in the harmonic approximation and approximating the potential curves of the highly excited core hole states with the potential curve for the ground state of NO⁺, X¹ Σ⁺. Knowledge of vibrational excitations in core electron spectra is shown to be valuable in the analysis of high resolution X-ray emission spectra of free molecules.     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

A new isoprenyl phenyl ether compound from mangrove fungus

A new isoprenyl phenyl ether, 3-hydroxy-4-(3-methylbut-2-enyloxy)benzoic acid methyl ester (1), together with 4-hydroxybenzoic acid (2), 2-hydroxy-6-methylbenzoic acid (3), and 4-hydroxy-3-methoxybenzoic acid (4) were isolated from Mangrove fungus (No. B60) from the South China Sea. The structures of the compounds were established on the basis of NMR spectroscopic and mass spectrometric data. In the preliminary bioassay, compound 1 exhibited antibacterial and antifungal activities. Compound 1 also inhibited cytotoxicity to the hepG2 cell line with an IC₅₀ value of 10.0 μg/mL. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 313–314, July–August, 2007.     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

The ion product of H2O,dissociation constants of H2CO3 and pitzer parameters in the system Na+/H+/OH−/HCO 3 − /CO 3 2- /ClO 4 − /H2O at 25°C

The ion product of water and the dissociation constants of carbonic acid have been determined in 0.1, 1.0, 3.0, and 5.0M NaClO₄ at 25°C. The ion product of water K _w ^' has been evaluated by emf measurements with a combined glass electrode in NaClO₄ solutions containing 0.001–0.1M HCLO₄ or NaOH. The product K _H ^' K _l ^' K ₂ ^' of the Henry constant for CO₂ and the dissociation constants for H₂CO₃ have been determined by titration of carbonate solutions equilibrated with pCO₂ =10^–3.52 atm, and K ₂ ^' has been evaluated by potentiometric titration and by measuring the H⁺ concentration at fixed HCO ₃ ^– and CO ₃ ^2- concentrations. The ion interaction (Pitzer) equations are applied to describe the constants K _w ^' , K ₂ ^' and K _H ^' H ₁ ^' K ₂ ^' as a function of the NaClO₄ concentration. The experimental data are used to evaluate the mixing parameters _{i/ClO 4} and _{i/ClO 4} ^-/Na⁺ fori = OH ^-,HCO ₃ ^- andCO ₃ ^2-